# Note: Makefile is built automatically from Makefile.in # # $Id: GNUmakefile.in,v 1.180 2009/02/28 08:28:14 fabiankeil Exp $ # # Written by and Copyright (C) 2001 - 2008 the SourceForge # Privoxy team. http://www.privoxy.org/ # # Based on the Internet Junkbuster originally written # by and Copyright (C) 1997 Anonymous Coders and # Junkbusters Corporation. http://www.junkbusters.com # # This program is free software; you can redistribute it # and/or modify it under the terms of the GNU General # Public License as published by the Free Software # Foundation; either version 2 of the License, or (at # your option) any later version. # # This program is distributed in the hope that it will # be useful, but WITHOUT ANY WARRANTY; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. See the GNU General Public # License for more details. # # The GNU General Public License should be included with # this file. If not, you can view it at # http://www.gnu.org/copyleft/gpl.html # or write to the Free Software Foundation, Inc., 59 # Temple Place - Suite 330, Boston, MA 02111-1307, USA. # ############################################################################# # Set make command correctly ############################################################################# ############################################################################# # Version number (for RPM) ############################################################################# VERSION_MAJOR = 3 VERSION_MINOR = 0 VERSION_POINT = 12 CODE_STATUS = stable VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT) RPM_VERSION = $(VERSION) RPM_PACKAGEV = "" SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d") ############################################################################# # "make install" directories and variables ############################################################################# #User Group paras USER = GROUP = datarootdir = ${prefix}/share prefix = /usr/local exec_prefix = ${prefix} CONF_BASE = ${prefix}/etc SBIN_DEST = ${exec_prefix}/sbin MAN_DIR = ${datarootdir}/man MAN_DEST = $(MAN_DIR)/man1 SHARE_DEST = ${datarootdir} DOC_DEST = $(SHARE_DEST)/doc/privoxy VAR_DEST = ${prefix}/var LOGS_DEST = $(VAR_DEST)/log/privoxy PIDS_DEST = $(VAR_DEST)/run # if $prefix = /usr/local then the default CONFDEST change from # CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy # by the target rule CONF_DEST # # also if the $prefix is /usr/local and there is no # $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there # instead in this situation # # finally if $prefix=/usr/local and VAR_DEST=$prefix/var it # changes this to /var for storing the logs and pidfile # used in source dir only, the install goes to $share_dest/doc/privoxy DOK_WEB = doc/webserver/ # Install usage should be compatible with install-sh. INSTALL = /usr/bin/install -c # Binaries BIN_MODE = 0755 # Support files, docs, etc. RA_MODE = 0664 # Directory DIR_MODE = 0755 # Files daemon writes to. RWD_MODE = 0660 INSTALL_P = -m $(BIN_MODE) INSTALL_T = -m $(RA_MODE) INSTALL_D = -m $(DIR_MODE) -d INSTALL_R = -m $(RWD_MODE) # install options for superuser install #INSTALL_S = -g -o ############################################################################# # Build tools ############################################################################# PROGRAM = privoxy CC = /home/n8fr8/dev/android/ndk/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc --sysroot=/home/n8fr8/dev/android/ndk/platforms/android-8/arch-arm ECHO = echo GZIP_PROG = gzip # id -u is not universal. FIXME: need to set from configure. Breaks on # Solaris. #ID = id -u ID = id LD = /home/n8fr8/dev/android/ndk/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc --sysroot=/home/n8fr8/dev/android/ndk/platforms/android-8/arch-arm RM = rm -f CP = cp -f RMDIR = rmdir MKDIR = ./mkinstalldirs STRIP_PROG = strip SED = sed GREP = grep CAT = cat RPM = rpm RPMBUILD = rpmbuild MV = mv TAR = tar LN = ln TOUCH = touch KILL = kill CHMOD = chmod CHOWN = chown CHGRP = chgrp GROUPS = groups WDUMP = -dump JADECAT = JADEBIN = false DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html DB2HTML = false MAN2HTML = false G2H_CMD = groff -mandoc -Thtml TARGET_OS = arm-linux-eabi PERL = perl DOC_DIR = doc/source DOC_TMP = $(DOC_DIR)/tmp DOC_STATUS = p-stable # Program to do LF->CRLF # # The sed version should be the most portable, but it doesn't for for me, # the other two do. FIXME. # - Jon #DOSFILTER = $(SED) -e $$'s,$$,\r,' #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}' DOSFILTER = $(PERL) -p -e 's/\n/\r\n/' CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa #TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX) ############################################################################# # Setup for make distribution rh and suse for now ############################################################################# TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz RPM_BASE = /home/n8fr8/rpmbuild ############################################################################# # We include these files in our distributions ############################################################################# CONFIGS = config trust default.action match-all.action user.action default.filter user.filter # take care that no CVS .cvsignore or other crappy files # are included here # and escape every '#' in the find. doh. CONFIG_FILES = $(CONFIGS) \ `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \ `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \ `find doc/webserver/ -name "*.css"` \ privoxy.1 ############################################################################# # Filenames and libraries ############################################################################# C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \ errlog.c filters.c gateway.c jbsockets.c jcc.c \ list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \ urlmatch.c C_OBJS = $(C_SRC:.c=.o) C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h W32_SRC = #w32log.c w32taskbar.c win32.c w32svrapi.c W32_FILES = #w32.res W32_OBJS = #$(W32_SRC:.c=.o) $(W32_FILES) W32_HDRS = #w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h W32_LIB = #-lwsock32 -lcomctl32 W32_INIS = #config.txt trust.txt PCRS_SRC = pcrs.c PCRS_OBJS = $(PCRS_SRC:.c=.o) PCRS_HDRS = $(PCRS_SRC:.c=.h) PCRE_SRC = pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c PCRE_OBJS = $(PCRE_SRC:.c=.o) PCRE_HDRS = pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h # No REGEX (maybe because dynamically linked pcreposix): REGEX_SRC = REGEX_SRC = pcre/pcreposix.c REGEX_OBJS = $(REGEX_SRC:.c=.o) REGEX_HDRS = $(REGEX_SRC:.c=.h) # Dependencies introduced by #include "project.h". PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) pcre/pcre.h # Socket libraries for platforms that need them explicitly defined SOCKET_LIB = # PThreads library, if needed. PTHREAD_LIB = SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC) OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS) HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS) LIBS = -lz $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB) ############################################################################# # Compiler switches ############################################################################# # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build. # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a # Win32 GUI build. # The flag "-pthread" is required if using Pthreads under Linux (and # possibly other OSs). SPECIAL_CFLAGS = # Add your flags here OTHER_CFLAGS = CFLAGS = -pipe -DANDROID -I/home/n8fr8/dev/gp/repos/orbot/external/include -I/home/n8fr8/dev/android/ndk/platforms/android-8/arch-arm/usr/include -fdata-sections -ffunction-sections -Os $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \ -Ipcre LDFLAGS = -L/home/n8fr8/dev/gp/repos/orbot/external/lib -L/home/n8fr8/dev/android/ndk/platforms/android-8/arch-arm/usr/lib -Wl,--gc-sections $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS) ############################################################################# # Build section. # # There should NOT be any targets above this line. ############################################################################# all: $(PROGRAM) default.action ############################################################################# # Phony targets ############################################################################# .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \ suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \ install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \ PID_DEST check_doc install-strip uninstall GROUP_T ############################################################################# # Define this explicitly because Solaris is broken! ############################################################################# %.o: %.c $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ ############################################################################# # Strip master copy comments from default.action: ############################################################################# default.action: default.action.master $(GREP) -v '^#MASTER#' $< > $@ ############################################################################# # Win32 config files ############################################################################# inifiles: $(W32_INIS) config.txt: config $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \ -e 's!\logfile logfile!logfile privoxy.log!' \ -e 's!#Win32-only: !!' \ < $< | \ $(DOSFILTER) > $@ # LF to CRLF in default.action $(DOSFILTER) default.action.txt && mv default.action.txt default.action # LF to CRLF in default.filter $(DOSFILTER) default.filter.txt && mv default.filter.txt default.filter trust.txt: trust $(DOSFILTER) < $< > $@ ############################################################################# # Pre-dist check: ############################################################################# dist-check: @if [ -d CVS ]; then \ $(ECHO) "***************************************************"; \ $(ECHO) "*** ***"; \ $(ECHO) "*** WARNING ***"; \ $(ECHO) "*** ***"; \ $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \ $(ECHO) "*** that you are trying to build a distribution ***"; \ $(ECHO) "*** package based on a checked out, not an ***"; \ $(ECHO) "*** exported copy of the source tree. Please ***"; \ $(ECHO) "*** see \"Releasing a new version\" in the ***"; \ $(ECHO) "*** developer manual. ***"; \ $(ECHO) "*** ***"; \ $(ECHO) "***************************************************"; \ $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \ $(ECHO) -n "really want to proceed: "; \ read answer; \ if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \ fi; ############################################################################# # create tar.gz from CVS: # This make-target is usually called through 'create-archive'. If you # run 'make create-snapshot' without setting SNAPVERSION, you'll get a # tar.gz with the current date in the name and as a releasenumber in the # spec-file. But the main usage is to run it as follows (Red Hat example): # make SNAPVERSION=1.6x create-snapshot # This creates a tar.gz and spec-file for a Red Hat 6.x version. ############################################################################# create-snapshot: @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \ [ x"$$tag" = x"(none)" ] && tag=HEAD; \ echo "*** Creating package from $$tag!"; \ TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \ cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \ cd $$TMPDIR/current; \ TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \ privoxy-rh.spec > $$TMPFILE ; then \ $(MV) -f $$TMPFILE privoxy-rh.spec; \ else \ $(ECHO) "Could not set version info in specfile."; \ exit 1;\ fi;\ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \ privoxy-suse.spec > $$TMPFILE ; then \ $(MV) -f $$TMPFILE privoxy-suse.spec; \ else \ $(ECHO) "Could not set version info in specfile."; \ exit 1;\ fi; \ $(RM) $$TMPFILE; \ cd $$TMPDIR/current; \ $(TAR) --exclude ".cvsignore" --exclude "CVS" \ -czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \ $(RM) -rf $$TMPDIR @echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz" ############################################################################# # looks at the version of Makefile and exports a corresponding source-tree # example: if the Makefile has the sticky tag v_2_9_13, you'll get # privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for # Red Hat and one for SuSe (different spec-files) ############################################################################# create-archive: make SNAPVERSION=$(SNAPVERSION) create-snapshot ############################################################################# # RPM specifice stuff (SuSE or Redhat, ..) ############################################################################# rpm-stuff: dist-check clean clobber for dir in RPMS SRPMS BUILD SOURCES SPECS; do \ if [ ! -w $(RPM_BASE)/$$dir ]; then \ $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \ $(ECHO) "Or add a suitable path to .rpmmacros like."; \ $(ECHO) "%_topdir /home/foo/rpm-build"; \ exit 1; \ fi; \ done; \ check-release: @if [ "$(RPM_PACKAGEV)" = "" ]; then \ echo ; \ echo " ERROR: NO RPM_PACKAGEV VALUE"; \ echo " No value given for RPM_PACKAGEV. Please use:"; \ echo " make dist-upload RPM_PACKAGEV=release"; \ echo " where \"release\" is the release number you want to and"; \ echo " where \"dist\" is the name of the distro (redhat or suse)"; \ echo ; \ echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \ echo ""; \ echo "ATTENTION: If your distribution use a specific tag on the"; \ echo " release field (like \"cl\" for Conectiva, and"; \ echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \ echo " given to RPM_PACKAGEV. It will be added automaticaly."; \ echo " Do it like you would do for a redhat package,"; \ echo " (i.e. just the number)."; \ echo ; \ exit 1; \ fi ############################################################################# # Create Conectiva specfile from RedHat specfile ############################################################################# conectiva-spec: $(RM) privoxy-cl.spec chmod a+x genclspec.sh ./genclspec.sh ############################################################################# # Conectiva distribution for x86 ############################################################################# conectiva-dist: rpm-stuff conectiva-spec $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . $(RPMBUILD) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi conectiva-upload: check-release make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl ############################################################################# # redhat distribution alpha and x86 ############################################################################# redhat-dist: rpm-stuff echo $(CONFIG_FILES) $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . $(RPMBUILD) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi # For testing build issues only! Use redhat-dist for official releases. redhat-test: echo $(CONFIG_FILES) $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . $(RPMBUILD) --clean -tb $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!" # anonymously ncftps the rpms to sourceforge redhat-upload: check-release ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm # better should use `arch` here instead of ix86 to support other platforms too ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118 ############################################################################# # Creates a Red Hat sourcepackage from CVS (not from the current sources # on disk) ############################################################################# redhat-srpm: make create-archive $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz ############################################################################# # suse distribution. works fine. no need to be root. ############################################################################# suse-dist: rpm-stuff # TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ # if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ # -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \ # privoxy-suse.spec > $$TMPFILE ; then \ # $(MV) -f $$TMPFILE privoxy-suse.spec; \ # else \ # $(ECHO) "Could not set version info in specfile."; \ # exit 1;\ # fi $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . $(RPMBUILD) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi # anonymously ncftps the rpms to sourceforge suse-upload: check-release ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm # better should use `arch` here instead of ix86 to support other platforms too ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # handle with care. use with root. suse-clean: $(RPM) -e junkbuster-suse || true $(RM) -r /etc/junkbuster $(RM) -r /etc/rc.d/junkbuster* $(RM) -r /var/run/junkbuster.pid $(RM) -r /var/log/junkbuster $(RM) /etc/init.d/junkbuster $(RM) /usr/sbin/junkbuster $(RM) /usr/sbin/rcjunkbuster $(RM) /usr/share/man/man1/junkbuster.1.gz $(RPM) -e privoxy-suse || true $(RM) -r /etc/privoxy $(RM) -r /etc/rc.d/privoxy* $(RM) -r /var/run/privoxy.pid $(RM) -r /var/log/privoxy $(RM) /etc/init.d/privoxy $(RM) /usr/sbin/privoxy $(RM) /usr/sbin/rcprivoxy $(RM) /usr/share/man/man1/privoxy.1.gz ############################################################################# # generic distribution ############################################################################# gen-dist: dist-check @$(ECHO) "" @$(ECHO) "You have run autoconf && autoheader && ./configure right?" @$(ECHO) "" $(MAKE) $(PROGRAM) $(STRIP_PROG) $(PROGRAM) $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) # add program (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM)) # add config files for foo in $(CONFIG_FILES); do \ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add documentation for foo in $(DOC_FILES); do \ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar @$(ECHO) Distribution with binary created. # anonymously ncftps the package to sourceforge gen-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # use with care gen-clean: $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar* ############################################################################# # solaris distribution. verified on SF machines by swa. ############################################################################# solaris-dist: gen-dist @$(ECHO) Done. # anonymously ncftps the package to sourceforge solaris-upload: gen-upload @$(ECHO) Done. # use with care solaris-clean: gen-clean @$(ECHO) Done. ############################################################################# # hpux distribution ############################################################################# hpux-dist: @$(ECHO) coming soon. hpux-upload: @$(ECHO) coming soon. ############################################################################# # debian distribution ############################################################################# debian-dist: @$(ECHO) coming soon. debian-upload: @$(ECHO) coming soon. ############################################################################# # macosx distribution ############################################################################# macosx-dist: @$(ECHO) coming soon. macosx-upload: @$(ECHO) coming soon. ############################################################################# # amiga distribution ############################################################################# amiga-dist: @$(ECHO) coming soon. amiga-upload: @$(ECHO) coming soon. ############################################################################# # freebsd distribution. verified on SF machines by swa. ############################################################################# freebsd-dist: gen-dist @$(ECHO) Done. # anonymously ncftps the package to sourceforge freebsd-upload: gen-upload @$(ECHO) Done. # use with care freebsd-clean: gen-clean @$(ECHO) Done. ############################################################################# # Windows distribution ############################################################################# win-dist: $(ECHO) Not implemented. ############################################################################# # Tarball distribution: No CVS dirs, dotfiles, debian build dir, # (FIXME:) only parts of the static / generated docs mix in doc/webserver ############################################################################# tarball-dist: dist-check clean clobber $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \ -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \ -name "PACKAGERS" \)`; do \ files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \ done && \ cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \ # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar @$(ECHO) Tarball distribution created. # anonymously ncftps the tarball to sourceforge tarball-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- tarball-clean: $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz ############################################################################# # # Documentation # # converts doc/source/*.sgml into html and man pages # ############################################################################# # developer manual dok-devel: $(RM) doc/webserver/developer-manual/*.html $(RM) -r doc/source/developer-manual mkdir -p doc/source/developer-manual cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/ # user manual dok-user: $(RM) doc/webserver/user-manual/*.html $(RM) -r doc/source/user-manual/ mkdir -p doc/source/user-manual cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/ # FIXME: temp fix so same stylesheet gets in more than one place so it works # for all doc set-ups, including the 'user manual' config option in local # system where it MUST be in same directory as html. $(PERL) -pi.bak -e 's/<\/head/\n\n<\/head/i' doc/webserver/user-manual/*html # faq dok-faq: $(RM) doc/webserver/faq/*.html $(RM) -r doc/source/faq mkdir -p doc/source/faq cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/ # man page, one variation. Try to use the next target, just 'make man'. dok-man: $(RM) doc/man/* doc/webserver/man-page/*.html ifneq ($(MAN2HTML),false) $(ECHO) "Privoxy Man page

NAME

" > doc/webserver/man-page/privoxy-man-page.html man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html $(ECHO) "" >> doc/webserver/man-page/privoxy-man-page.html else $(MAKE) groff2html endif # Build man page from sgml. This requires the SGMLSpm perl module. # See CPAN, or your favorite perl repository. This is the preferred # target for man page generation! man: dok-release mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\ nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\ perl -pi.bak -e 's/ //; s/\[ /\[/g' privoxy.1 ;\ perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \ perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \ perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \ perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \ perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \ $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1 # For those with man2html ala RH7s. man2html: mkdir -p doc/webserver/man-page ifneq ($(MAN2HTML),false) $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html $(PERL) -pi.bak -e 's///; s//man2html/' tmp.html $(PERL) -pi.bak -e 's/(<\/HEAD>)/<\/HEAD>/' tmp.html # Twice because my version of man2html is pulling in commas and periods in URLs. $(PERL) -pi.bak -e 's/()/$$1$$2/g' tmp.html $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html # Get rid of spurious  from conversion. (How to do this with perl?) $(SED) -e 's///g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.* else $(MAKE) groff2html endif # Otherwise we get plain groff conversion. groff2html: $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@@@' > doc/webserver/man-page/privoxy-man-page.html # readme page and INSTALL file dok-readme: dok-release cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\ env -u LANG $(WDUMP) tmp.html > ../../README ;\ $(DB)-notoc -V nochunks install.sgml > tmp.html &&\ env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\ $(RM) tmp.* # index.sgml is used to create both the Home Page, and a local index # for documentation, etc. # # index.html for webserver: dok-webserver: cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\ s/<\/HEAD/\n<\/HEAD/;\ s/<\/HEAD/\n<\/HEAD/;\ s/\.\d\. //;\ s/__copy/©/'\ doc/webserver/index.html && $(RM) doc/webserver/*.bak # privoxy-index.html for local documentation: dok-index: cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\ s/<\/HEAD/\n<\/HEAD/;\ s/<\/HEAD/\n<\/HEAD/;\ s/\.\d\. //;\ s/__copy/©/' \ doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak # Main documentation target. dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index @$(ECHO) Documentation created. # # an alternative to the above dok. disabled man page creation for the moment # redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors @$(ECHO) Documentation created. ## Make README redhat-readme: cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \ tmp.html > ../../README && $(RM) -r tmp.html ## Make AUTHORS file dok-authors: cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \ tmp.html > ../../AUTHORS && $(RM) tmp.html # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content # exceptions accordingly. This needs to go before any doc building (doh). dok-release: @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS) @$(PERL) -pi.bak -e 's///;\ s///' \ doc/source/*sgml doc/source/*/*sgml $(RM) -r doc/source/*bak doc/source/*/*bak ifeq ($(CODE_STATUS),stable) @$(ECHO) Setting docs to stable $(VERSION) @$(PERL) -pi.bak -e 's///;\ s///' \ doc/source/*sgml doc/source/*/*sgml $(RM) -r doc/source/*bak doc/source/*/*bak else @$(ECHO) Setting docs to not stable $(VERSION) @$(PERL) -pi.bak -e 's///;\ s///' \ doc/source/*sgml doc/source/*/*sgml $(RM) -r doc/source/*bak doc/source/*/*bak endif # Create release announcement in text and html, with short and long versions. # This is a standalone target, and must be invoked directly. # announce: dok-release # mkdir -p $(DOC_TMP) # cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\ # mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt # cd $(DOC_TMP) && $(DB) announce.sgml &&\ # mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\ # mv -f *html *txt ../../.. # rm -fr $(DOC_TMP) # The main Privoxy config file, generated from sgml sources. # NOTE: This will require some hand editing. The new file is outputted # as config.new so that problem sections can be compared to previous # version. This is hardcored to w3m for html/text conversion. Also, # requires the shell util 'fmt'. config-file: dok-release cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\ env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.* $(PERL) -i.bak utils/prepare-configfile.pl config.new $(RM) *.bak @$(ECHO) "****************************************************" @$(ECHO) "The output file is config.new." @$(ECHO) "Now -- you need to hand edit the results!!!" @$(ECHO) "In particular, check the Debug levels, the" @$(ECHO) "permit-access, forward & socks examples and the" @$(ECHO) "various user-manual examples, which all" @$(ECHO) "probably got hammered." @$(ECHO) "****************************************************" # config file, alternate version using lynx (perl stuff unfinished). Lynx # does not do so good a job. config-file-alt: cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\ $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\ lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.* $(PERL) -pi -e 's/^( )//;\ s/:$\/:\n/' config.new ############################################################################# # # Webserver # # moves dokumentation to webserver # ############################################################################# webserver: tidy @$(ECHO) ------------------------------------------------------- @$(ECHO) You will need to "create" a SF shell first: @$(ECHO) ssh -t USER,PROJECT@shell.sourceforge.net create @$(ECHO) Please make sure your documentation files are up to date. @$(ECHO) Note that this command updates the home page and scps @$(ECHO) all stuff to the webserver, it will not remove obsolete documents. @$(ECHO) You will also need to change the user-manual symlink manually. @$(ECHO) ------------------------------------------------------- @$(ECHO) Uploading html @cd doc/webserver; \ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ $(TAR) c $$upload | ssh shell.sf.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp' @$(ECHO) Fixing permissions @ssh shell.sf.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true' @ssh shell.sf.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true' @ssh shell.sf.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true' web-actions: tidy @$(ECHO) Uploading @cd doc/webserver/actions; \ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm' @$(ECHO) Fixing permissions @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null' @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null' ## dok-put: tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \ --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\ doc/* INSTALL LICENSE AUTHORS README \ -czf $(DOC_FILE) ;\ $(ECHO) "Uploading doc package ..." ;\ scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/ @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true' $(RM) $(DOC_FILE) dok-get: cd /tmp ;\ $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\ $(TAR) -zxvf $(DOC_FILE) ############################################################################# # Source file dependencies ############################################################################# actions.o: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h cgi.o: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h cgiedit.o: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h cgisimple.o: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h deanimate.o: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS) encode.o: encode.c encode.h config.h errlog.o: errlog.c errlog.h config.h $(PROJECT_H_DEPS) #w32log.h filters.o: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h #win32.h gateway.o: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h jbsockets.o: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h jcc.o: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h #w32log.h win32.h w32svrapi.h cgi.h list.o: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h loadcfg.o: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h #w32log.h win32.h loaders.o: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h miscutil.o: miscutil.c miscutil.h config.h parsers.o: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h ssplit.o: ssplit.c ssplit.h config.h miscutil.h urlmatch.o: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h # GNU regex gnu_regex.o: gnu_regex.c gnu_regex.h config.h # PCRS pcrs.o: pcrs.c pcrs.h config.h pcre/pcre.h # PCRE pcre/get.o: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/maketables.o: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcre.o: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c pcre/pcreposix.o: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h pcre/study.o: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h # An auxiliary program makes the PCRE default character table source pcre/chartables.c: pcre/dftables pcre/dftables >pcre/chartables.c pcre/dftables: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h $(CC) -o pcre/dftables $(CFLAGS) pcre/dftables.c # Win32 w32log.o: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h w32taskbar.o: w32taskbar.c config.h w32log.h w32taskbar.h win32.o: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h windres -D__MINGW32__=0.2 -O coff -i $< -o $@ # AmigaOS #OBJS += amiga.o #ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos) #CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code #LDFLAGS += -m68020 -noixemul -fbaserel #LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o #else #CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS #endif #amiga.o: amiga.c amiga.h config.h $(PROGRAM): $(OBJS) $(W32_FILES) $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) clean: $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags` config.base config.tmp tidy: $(RM) `find . -name "*~"` $(RM) `find . -name "#*#"` # Emacs backup files $(RM) `find . -name ".\#*"` clobber: tidy $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \ privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new $(RM) -r autom4te.cache # # FIXME: What is all this? # $(RM) cscope.* *.pdb *.lib *.exp distclean: clobber tags: $(SRCS) $(HDRS) etags $(SRCS) $(HDRS) CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \ $(ECHO) "$(CONF_BASE)/privoxy";\ else\ $(ECHO) "$(CONF_BASE)";\ fi) LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \ $(ECHO) "/var/log/privoxy" ;\ else\ $(ECHO) "$(LOGS_DEST)";\ fi) PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \ $(ECHO) "/var/run" ;\ else\ $(ECHO) "$(PIDS_DEST)";\ fi) check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \ $(ECHO) "1";\ else\ $(ECHO) "0";\ fi) # If USER is specified but no GROUP, assume there is a GROUP of same name. GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \ $(ECHO) "$(USER)" ;\ else\ $(ECHO) "$(GROUP)";\ fi) install-strip: $(MAKE) install STRIP=-s # FIXME: Test USER and GROUP on Slack to make sure this works as # intended. # # FIXME: id handling needs help, probably via configure, since 'id -u' is not # universally reliable (eg Solaris). Group handling could be better. # Perhaps the whole user/group validation should be done here, and simplified. PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS) install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T @# Quick test for valid USER. @if [ -n "$(USER)" ]; then \ $(ID) $(USER) >/dev/null || exit 1;\ fi @# Test for valid group. FIXME. USER does not have to belong to GROUP @# for file ownership purposes. # if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \ # $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\ # fi @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation" $(CHMOD) $(DIR_MODE) $(MKDIR) @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \ $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \ $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST) @# Install the executable binary, strip if invoked as install-strip @test -n "$(STRIP)" &&\ $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\ $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST) $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST) @# Install the DOCS and man page. install-sh only does one file at a time. @# FIXME: only handles jpegs. -@if [ $(check_doc) = 0 ]; then \ DOC=$(DOC_DEST) ;\ else \ DOC=$(prefix)/doc/privoxy ;\ fi;\ $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \ $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\ if [ -d "$(DOK_WEB)" ]; then \ $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\ for i in user-manual developer-manual faq; do \ for ii in $(DOK_WEB)/$$i/*html; do \ $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\ done ;\ done ;\ for i in $(DOK_WEB)/user-manual/*jpg; do \ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\ done ;\ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\ $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\ fi @# Not all platforms support gzipped man pages. @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1 -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1 @# Change the config file default directories according to the configured ones @$(ECHO) Rewriting config for this installation @if [ -f config.base ] ; then \ $(CAT) config >config~ ;\ $(MV) config.base config ;\ fi $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \ $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp -@if [ $(check_doc) = 0 ]; then \ $(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\ else \ $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\ fi;\ $(MV) config config.base $(MV) config.updated config @# Install the config support files. Test for root install, and abort @# if there is no privoxy user, and no other user was enabled during @# configure. Later, install init script if appropriate. @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates @for i in `find templates -type f`; do \ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\ done @# FIXME: group/user validation is overly convoluted. @# If superuser install ... we require a minimum of group ownership @# of those files the daemon writes to, to be non-root owned. @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\ if [ x$(USER) = x ] || [ $(USER) = root ]; then \ if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \ if [ "`$(ID) privoxy`" ] && \ $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\" >/dev/null; then \ $(ECHO) "Warning: Setting group owner to privoxy";\ GROUP_T=privoxy ;\ else \ $(ECHO) "******************************************************************" ;\ $(ECHO) " WARNING! WARNING! installing config files as root!" ;\ $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\ $(ECHO) " and to install the config files as that user and/or group!" ;\ $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\ $(ECHO) "*******************************************************************" ;\ exit 1 ;\ fi ;\ else \ GROUP_T=$(GROUP) ;\ fi ;\ INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\ else \ $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\ INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\ GROUP_T=$(GROUP_T) ;\ fi ;\ else \ if [ ! "`id $(USER)`" = "`id`" ] ;then \ $(ECHO) "** WARNING ** current install user different from configured user!!" ;\ $(ECHO) "Edit may fail." ;\ fi ;\ INSTALL_CONF="$(INSTALL_R)" ;\ fi ;\ $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\ for i in $(CONFIGS); do \ if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \ $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\ $(ECHO) Installing fresh $$i;\ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\ elif [ -s "$(CONF_DEST)/$$i" ]; then \ $(ECHO) Installing $$i as $$i.new ;\ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\ NEW=1;\ else \ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\ fi ;\ done ;\ if [ -n "$$NEW" ]; then \ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\ $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\ fi ;\ [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \ $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\ $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\ if [ x$$USER != x ]; then \ $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\ fi ;\ if [ x$$GROUP_T != x ]; then \ $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\ fi ;\ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\ if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \ $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \ $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \ $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \ $(SED) 's+%USER%+$(USER)+' | \ $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\ $(ECHO) "Installing for Slackware." ;\ $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\ elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \ $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\ $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\ $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\ $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\ $(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\ $(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\ $(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\ $(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \ $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\ $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\ $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\ fi ;\ else \ $(ECHO) "No init script installed, install it manually if needed" ;\ fi $(RM) config.base config.tmp @# mmmmm, good. @$(ECHO) "$(PROGRAM_V) installation succeeded!" @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)" # rmdir is used as a precaution since it will not remove non-empty # directories. RH init script creates lock file and pid file. uninstall: CONF_DEST LOG_DEST PID_DEST check_doc @$(ECHO) Starting Privoxy uninstallation @# KILL privoxy if running @# XXX: the chkconfig line may need a DESTDIR prefix. -@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \ $(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\ chkconfig --del $(PROGRAM) 2>/dev/null;\ fi -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\ $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || : -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\ $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || : @# Program binary @$(ECHO) Removing $(PROGRAM) binary $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~ @# config files and dir, and maybe old install backups -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \ $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\ $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\ cd $(DESTDIR)$(CONF_DEST) ;\ for i in $(DESTDIR)$(CONFIGS); do \ [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\ done ;\ fi @$(ECHO) Removing $(PROGRAM) config files -@for i in $(DESTDIR)$(CONFIGS); do \ test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\ $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\ done -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\ $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*" @# man page and docs @$(ECHO) Removing $(PROGRAM) docs -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1* -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy @# Log and pidfile @$(ECHO) Removing $(PROGRAM) logs -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid @# Final clean up of unused directories. Special handling of CONF and LOG # destinations. @$(ECHO) Removing $(PROGRAM) directories @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \ if test -d $$i; then \ $(ECHO) Removing $$i ;\ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\ fi;\ done @if [ ! "$(prefix)" = "/usr/local" ] ;then \ for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \ $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \ if test -d $$i; then \ $(ECHO) Removing $$i ;\ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\ fi;\ done;\ if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \ $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\ $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\ fi ;\ if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \ $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\ $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\ fi ;\ if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \ $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\ $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\ fi ;\ if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \ $(ECHO) Removing $(DESTDIR)$(prefix) ;\ $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\ $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\ fi;\ fi @# init scripts and logrotate @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \ $(ECHO) Removing $(PROGRAM) init script ;\ if [ -f $(DESTDIR)/etc/slackware-version ] && \ [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \ $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\ elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \ && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \ $(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \ $(RM) $(DESTDIR)/etc/init.d/privoxy ;\ else \ $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\ fi ;\ fi @$(ECHO) Privoxy uninstalled, bye coffee: @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \ -e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \ -e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \ -e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \ -e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \ -e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \ -e '187,54,220,125,193,51,228,11,1,0,0);' | zcat ############################################################################# ## Local Variables: ## tab-width: 3 ## end: # $Log: GNUmakefile.in,v $ # Revision 1.180 2009/02/28 08:28:14 fabiankeil # pcrs.o doesn't depend on pcre/pcre.h if we are linking # dynamically. Patch provided by drauh in #2056286. # # Revision 1.179 2009/02/22 14:48:31 hal9 # Updates to the 'make webserver' target that recreates the home page and uploads # fresh documents to reflect new SF realities, and more explanation of process. # # Revision 1.178 2009/02/08 18:35:48 fabiankeil # Move the match-all section into a separate file # (match-all.action) so we can safely overwrite the # default actions when updating. Based on Roland's # patch #1563977. # # Revision 1.177 2009/01/13 16:44:32 fabiankeil # Delete the standard.action file after moving # the pre-settings over to the default actions. # # Revision 1.176 2008/09/21 13:24:37 fabiankeil # Add Roland's man page fixes from 19_manpage_fixup.dpatch. # # Revision 1.175 2008/08/30 12:03:07 fabiankeil # Remove FEATURE_COOKIE_JAR. # # Revision 1.174 2008/07/18 17:50:47 fabiankeil # Fix whitespace. # # Revision 1.173 2008/06/18 18:28:42 fabiankeil # Remove PDF-related stuff. # # Revision 1.172 2008/06/17 16:16:08 fabiankeil # - Stop building text files nobody cares about. # - Update copyright year. # # Revision 1.171 2008/06/13 15:24:57 fabiankeil # Move previously inline'd Perl code for the config-file target # into a separate file, have it work with older perl releases, # clean it up a bit and fix the "underlining" code. # # Revision 1.170 2008/06/12 16:38:50 fabiankeil # Add third-level domain to URL in dok-get target. # # Revision 1.169 2008/06/09 17:28:31 fabiankeil # - Recommend https for releasing files. # - Fix a warning about datarootdir being ignored. # # Revision 1.168 2008/05/23 18:03:12 fabiankeil # - Shorten meta description inserted in dok-webserver # and dok-index target. # - In config-file target, unset LANG for w3m as we # might otherwise end up with multi-byte characters. # # Revision 1.167 2008/05/23 14:39:09 fabiankeil # Silence dok-user complaint about @# not being found. # # Revision 1.166 2008/05/23 14:04:57 fabiankeil # - Get config-file target working with more recent Perl # versions. The generated file is still messed up, though. # - Fix comment typo. # # Revision 1.165 2008/05/22 16:57:23 fabiankeil # Fix coffee machine. # # Revision 1.164 2008/05/22 10:26:26 fabiankeil # - Remove parsers.o's dependency on encode.h. # - Include Emacs backup files in tidy target again. # # Revision 1.163 2008/05/04 18:01:53 fabiankeil # Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h. # # Revision 1.162 2008/03/30 13:31:42 fabiankeil # Add DESTDIR support for the uninstall target. # # Revision 1.161 2008/03/30 13:19:13 fabiankeil # Add DESTDIR support for the install target. Closes PR#1910612. # Patch by Radoslaw Zielinski with minor modifications. # # Revision 1.160 2008/03/27 18:27:19 fabiankeil # Remove kill-popups action. # # Revision 1.159 2008/03/21 11:13:53 fabiankeil # Only gather host information if it's actually needed. # Also move the code out of accept_connection() so it's less likely # to delay other incoming connections if the host is misconfigured. # # Revision 1.158 2007/12/11 21:29:25 fabiankeil # Fix dependency list for cgiedit.c. # # Revision 1.157 2007/12/10 02:28:02 hal9 # Unset $LANG for text processing of docs so we get pure text. # # Revision 1.156 2007/11/15 03:17:43 hal9 # Some workaround changes to the config file perl stuff and comments, which is # broken here all by itself on perl 5.8.8. # # Revision 1.155 2007/09/22 16:23:25 fabiankeil # Update copyright line. # # Revision 1.154 2007/02/07 11:52:40 fabiankeil # Fix suse-dist as described in BR#1654052. # (I didn't test it, but it's done the same # way in redhat-dist which is known to work). # # Revision 1.153 2007/01/07 07:36:36 joergs # Added AmigaOS4 support. # # Revision 1.152 2006/12/13 14:53:51 etresoft # Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created. # # Revision 1.151 2006/11/30 01:08:55 hal9 # Fix problem with variable declarations in the Slackware section. Thanks to higuita. # # Revision 1.150 2006/10/25 11:55:45 fabiankeil # Fix sed regexes for rewriting "confdir ." and "logdir .". # Thanks to Darel Henman for reporting this. # # Revision 1.149 2006/10/11 01:40:28 hal9 # Apply patch from Neil McCalden to fix syntax issue. # # Revision 1.148 2006/09/26 10:57:58 hal9 # Including Karsten's patch to fix make create-snapshot. # # Revision 1.147 2006/09/13 01:25:16 hal9 # Make sure install forces in new default.action, default.filter, and # standard.filter. These are privoxy files, not user files. # # Revision 1.146 2006/09/08 23:57:19 hal9 # User manual images are now user-manual doc directory, and fix make install # target accordingly. # # Revision 1.145 2006/09/08 02:32:00 hal9 # Various changes to implement building and installing docs to be compatible # with the new "user-manual" settings in config from Roland. Docbook does not # seem to like dealing with more than one css file, so workaround that here. # Change 'make install' so it provides p_doc.css in the user-manual doc # directory so that functions well, and lastly modify 'make install' so that the # PATH is automatically set, and the 'user-manual' directive should done during # the install. # # Revision 1.144 2006/09/07 22:53:20 hal9 # Make sure config sgml build related artifacts are cleaned out. # # Revision 1.143 2006/09/02 15:59:40 hal9 # Add to code status to make install output. # # Revision 1.142 2006/08/29 01:46:24 hal9 # Add user.filter to $CONFIGS. # # Revision 1.141 2006/08/12 03:54:37 david__schmidt # Windows service integration # # Revision 1.140 2006/07/18 14:48:45 david__schmidt # Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch) # with what was really the latest development (the v_3_0_branch branch) # # Revision 1.104.2.28 2004/06/10 17:06:05 hal9 # Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the # only place it is used. # # Revision 1.104.2.27 2004/02/07 16:11:10 oes # Make clobber remove the autom4te.cache dir. # Closes BR #889300 # # Revision 1.104.2.26 2004/01/31 16:32:25 oes # Adding a check for an htmldoc variant from the debian diff # # Revision 1.104.2.25 2004/01/31 01:15:33 oes # Fixed a typo; updated copyright notice # # Revision 1.104.2.24 2003/12/03 10:30:02 oes # - Added new dependency: actions.c -> ssplit.h # - Excluded PDF docs from src tarball # # Revision 1.104.2.23 2003/04/20 17:28:52 hal9 # Strip trailing spaces from config-file generation, bug #724596. # # Revision 1.104.2.22 2003/03/28 03:32:01 hal9 # Minor changes for Privoxy home page: # - Handle © more sanely # - include link to announce.txt # Also, disable 'make announce' target. # # Revision 1.104.2.21 2002/11/04 07:04:03 hal9 # Catch up with main trunk install/uninstall. Quiet output, etc. # # Revision 1.104.2.20 2002/10/25 02:44:22 hal9 # Port of make install, etc from main trunk. Needs testing! Add Slackware # support, and other related changes. Update related docs. # # Revision 1.104.2.19 2002/09/26 22:50:02 hal9 # New user-manual examples in config-file are getting wrapped. Add warning. # # Revision 1.104.2.18 2002/08/23 12:22:40 oes # Added warning to broken install target # # Revision 1.104.2.17 2002/08/16 03:19:34 hal9 # More (minor) cleanup of html before pdf processing to make some relative # links work as pdf -> pdf. Upload pdf as zip archive now. # # Revision 1.104.2.16 2002/08/14 16:43:27 hal9 # Added pdf docs to make webserver target. # # Revision 1.104.2.15 2002/08/11 20:02:41 hal9 # New targets for man page (make man) and pdf (make dok-pdf) targets. # # Revision 1.104.2.14 2002/08/10 11:19:37 oes # - Make -Ipcre (again) conditional on STATIC_PCRE # - $(RPMBUILD) -> $(RPM) for SuSE # - Add dependency: pcrs.o deps on config.h # # Revision 1.104.2.13 2002/08/07 15:13:54 hal9 # Remove pdf2 target, and make it dok-shtml (single page html for pdf # conversion). # # Revision 1.104.2.12 2002/08/06 11:29:36 oes # Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH # # Revision 1.104.2.11 2002/07/30 19:38:11 hal9 # Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what # *I think* it was supposed to be (was breaking upload targets since it was # set to RPM_VERSION). # # Revision 1.104.2.10 2002/07/27 22:56:53 kick_ # cleanups of the redhat-srpm target # # Revision 1.104.2.9 2002/07/26 15:17:02 oes # - Added generation of default.action from defaul.action.master # - Deleted obsolete re_filterfile.txt generation # # Revision 1.104.2.8 2002/07/12 10:04:32 kick_ # added helper targets to the makefile. They shouldn't break anything, but # make my life a lot easier. # # The new rpm has been splitted into two parts, one for package installation/ # removal, one for package building. # Therefore rpm -ta isn't a valid command anymore and needs to be replaced # by rpmbuild -ta (this is backwards compatible) # # Revision 1.104.2.7 2002/06/07 00:23:47 hal9 # Fixing a quirk of man2html (on my system) that pulls punctuation into URLs, # thus breaking them completely. # # Revision 1.104.2.6 2002/06/02 03:26:25 hal9 # Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude # index.html and team/index.html) # # Revision 1.104.2.5 2002/05/30 15:35:01 hal9 # This is more cleanup on the make config-file target. Most issues for # automatic generation are taken care of. There are still some problems # that require hand editing. Namely, some of the examples that are > 80 chars. # # Revision 1.104.2.4 2002/05/29 02:12:17 hal9 # Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the # new target is 'make config-file', _not_ make config. # # Revision 1.104.2.3 2002/05/29 02:05:48 hal9 # 'make config' target added (WIP) for future generation of config file from # text in u-m so the two are in sync. New generated config, which requires # some hand editing for the time being. # # Revision 1.104.2.2 2002/05/28 02:32:55 hal9 # New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files # not being cleaned up in doc/webserver. # # Revision 1.104.2.1 2002/05/26 17:19:34 hal9 # Remove Table of Contents from readme with oes's dsl trick. # # Revision 1.104 2002/05/24 00:03:49 oes # Use p_doc.css for the Homepage for consistency # # Revision 1.103 2002/05/23 23:19:00 oes # Use dsl without TOC for the homepage # # Revision 1.102 2002/05/16 01:20:17 hal9 # make announce target added. # # Revision 1.101 2002/05/15 12:28:46 oes # Trying to keep Hal happy :) # # Revision 1.100 2002/05/08 13:48:18 hal9 # Ooops, that trashed JB v2.0.2 comment. Fixed. # # Revision 1.99 2002/05/08 13:42:07 hal9 # This fixes the numbering problem on index.html in contact info section (.1.). Using # perl, since its way too convoluted to try to fix proper with docbook. # # Revision 1.98 2002/05/03 14:33:06 oes # Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find # # Revision 1.97 2002/04/27 20:27:43 swa # no longer needed due to new # PACKAGE_VERSION process # # Revision 1.96 2002/04/27 17:44:32 morcego # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-) # - Using the RM macro everywhere rm is called (either we use, or don't) # - Same for RPM # # Revision 1.95 2002/04/27 15:37:25 swa # replacing directory in document creation process # no longer necessary. # # Revision 1.94 2002/04/27 08:23:29 swa # pdf process reviewed and cleaned up # # Revision 1.93 2002/04/27 04:55:53 morcego # privoxy-cl.spec now gets removed by clobber target # # Revision 1.92 2002/04/27 04:53:40 morcego # Adding --exclude "PACKAGERS" to every tar command that applies (not for # webserver target) # # Revision 1.91 2002/04/27 04:44:51 morcego # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore # the PACKAGERS file, as well privoxy-cl.spec (in case it was created) # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and # conectiva-upload # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile # for Conectiva Linux # # Revision 1.90 2002/04/26 17:46:53 swa # be consistent # # Revision 1.89 2002/04/26 17:20:54 swa # just produce single html files to proces them later with Destiller or somesuch. looks prettier. # # Revision 1.88 2002/04/25 19:13:57 morcego # Removed RPM release number declaration on configure.in # Changed makefile to use given value for RPM_PACKAGEV when on uploading # targets (will produce an error, explaining who to do it, if no value # if provided). # # Revision 1.87 2002/04/23 14:10:59 swa # now create pdf documents # # Revision 1.86 2002/04/15 04:30:27 hal9 # Missed two -pi.bak's on perl/cygwin problem. # # Revision 1.85 2002/04/14 01:05:34 hal9 # Revert dok-webserver change for SF logo. # # Revision 1.84 2002/04/13 22:43:25 hal9 # -Fix dok-webserver for SF logo (more perl). # -Change all perl -pi to perl -pi.bak for Cygwin problem. # # Revision 1.83 2002/04/12 09:39:25 oes # Excluding yet more files from tarball; making dist warning yet more scary # # Revision 1.82 2002/04/11 21:07:11 oes # Excluding more files from tarball build # # Revision 1.81 2002/04/11 14:40:27 oes # Fixed typo -- Thanks, Moritz! # # Revision 1.80 2002/04/11 12:50:00 oes # Fixed tarball-dist target # # Revision 1.79 2002/04/11 06:49:28 oes # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log # # Revision 1.78 2002/04/09 13:37:11 sarantis # fix tar options typo # # Revision 1.77 2002/04/09 13:28:53 swa # build suse and gen-dist with html docs # # Revision 1.76 2002/04/08 22:43:41 oes # Fix: Include dotfiles in fixing webserver permissions # # Revision 1.75 2002/04/08 22:14:59 oes # Silencing tar warnings in the web* targets # # Revision 1.74 2002/04/08 15:22:44 hal9 # This has finishing touches for dok building. Should be ready to go. # -The main doc build is now 'make dok', should work on Redhat too. # -Removed man page from main doc build. It is built separately due to # perl scripts that most aren't likely to have. # # Revision 1.73 2002/04/08 14:03:24 oes # oes for al: Fix install target # # Revision 1.72 2002/04/08 13:42:11 oes # Added safety check to *-dist targets; fixed permissions for feedback logfile # # Revision 1.71 2002/04/07 20:32:03 hal9 # -Add meta data kludge for make dok-webserver via $(PERL). # -Add subdirs for 'make dok-release'. # # Revision 1.70 2002/04/07 08:59:40 swa # generated files. do NOT edit. # fixed directory bug in makefile. # # Revision 1.69 2002/04/07 08:10:47 swa # create some of the webserver docs # automatically (in particular if # those docs recycle other documentation # fragments). Now committed webserver's # index file. # # Revision 1.68 2002/04/07 07:58:11 swa # create some of the webserver docs # automatically (in particular if # those docs recycle other documentation # fragments) # # Revision 1.67 2002/04/07 05:31:42 hal9 # Add 'dok-release' target: # -Set doc entities to VERSION and CODE_STATUS during make. # -Set doc conditional content flags (stable vs non-stable). # A separate target for the time being but needs to be incorporated into # dok build at some point. # -Filter out a spurious ^G from new man page > html converion in man2html. # # Revision 1.66 2002/04/06 20:28:21 jongfoster # Prettifying groff2html. # Using GNU Make's conditional makefile feature rather than shell "if"s. # (The shell "if"s were hiding errors) # "perl" -> "$(PERL)" # Spaces->tabs in a couple of places. # # Revision 1.65 2002/04/06 05:16:39 hal9 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP). # -Both of these will soon be generated files. # # Revision 1.64 2002/04/04 22:14:51 oes # No longer rely on find honoring -iname # # Revision 1.63 2002/04/04 21:06:22 swa # cosmetics. # # Revision 1.62 2002/04/04 20:49:50 swa # attempt to consolidate the # different dokbook versions. # # Revision 1.61 2002/04/04 19:18:21 swa # readme was leftover directory. use w3m instead # of lynx to be consistent among developers. use # consistent target naming. # # Revision 1.60 2002/04/04 12:25:41 oes # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions # # Revision 1.59 2002/04/04 08:32:45 swa # wrong name for tarball-dist target. further fixed content of tarball dist # # Revision 1.58 2002/04/04 06:32:58 hal9 # New dok targets for make readme. # # Revision 1.57 2002/04/04 00:36:36 gliptak # always use pcre for matching # # Revision 1.56 2002/04/03 22:28:03 gliptak # Removed references to gnu_regex # # Revision 1.55 2002/04/03 19:54:29 swa # freebsd tested to work. attempt to move tarball dist target forward # # Revision 1.54 2002/04/03 14:54:07 oes # Standard clean and clobber semantics II # # Revision 1.53 2002/04/03 14:19:16 oes # Standard clean and clobber semantics # # Revision 1.52 2002/04/03 02:56:18 hal9 # Revert previous FAQ numbering kludge. # # Revision 1.51 2002/04/02 13:03:56 oes # Added fix for webserver permissions # # Revision 1.50 2002/04/02 03:46:24 hal9 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort # to make the Table of Contents not so 'busy' looking. SuSE needs testing :) # # Revision 1.49 2002/03/30 22:20:12 swa # cd didn't work. neither did find. # # Revision 1.48 2002/03/30 19:04:06 swa # people release differently. no good. # I want to make parts of the docs only. # # Revision 1.47 2002/03/30 09:05:21 swa # better packaging. better rpm building. # tar failed on sun (no exclude there). # # Revision 1.46 2002/03/29 20:09:01 swa # al's patch # # Revision 1.45 2002/03/29 19:45:45 swa # for lazy swa # # Revision 1.44 2002/03/29 17:42:44 gliptak # Correcting for Solaris tar limitations # # Revision 1.43 2002/03/29 07:40:03 swa # fixed make webserver. doh # # Revision 1.42 2002/03/29 06:59:04 swa # other users could not modify files on webserver # # Revision 1.41 2002/03/28 20:43:00 swa # set make correctly # # Revision 1.40 2002/03/28 04:22:44 hal9 # More on man2html stuff. # # Revision 1.39 2002/03/28 01:04:14 hal9 # More man2html stuff for docs. # # Revision 1.38 2002/03/27 16:02:30 swa # have a generic target # # Revision 1.37 2002/03/27 15:30:26 swa # have a consistent appearance # # Revision 1.36 2002/03/27 14:58:08 swa # can be used by mutilple targets # # Revision 1.35 2002/03/27 14:53:19 swa # added solaris-dist # # Revision 1.34 2002/03/27 10:30:11 swa # we want a html man file on the webserver # # Revision 1.33 2002/03/27 03:05:35 hal9 # Added man2html target for docs (redhat-dok only for now) # # Revision 1.32 2002/03/26 22:29:54 swa # we have a new homepage! # # Revision 1.31 2002/03/26 14:00:18 swa # fixed make tarball, tarball-dist, tarball-clean # # Revision 1.30 2002/03/25 12:52:25 swa # new targets # # Revision 1.29 2002/03/24 17:03:55 jongfoster # Name change # # Revision 1.28 2002/03/24 16:19:48 swa # configure needs to be generated. # # Revision 1.27 2002/03/24 16:13:57 swa # generated files are a nono in cvs # # Revision 1.26 2002/03/24 15:36:02 swa # did not build. # # Revision 1.25 2002/03/24 14:31:08 swa # remove more crappy files. set RPM # release version correctly. # # Revision 1.24 2002/03/24 14:19:55 swa # set rpm package release in configure.in. nowhere else. # # Revision 1.23 2002/03/24 13:06:49 swa # suse-clean now runs fine # # Revision 1.22 2002/03/24 12:56:21 swa # name change related issues. # # Revision 1.21 2002/03/24 12:43:57 swa # name change # # Revision 1.20 2002/03/24 11:39:17 jongfoster # Renaming config files # # Revision 1.19 2002/03/22 20:53:03 morcego # - Ongoing process to change name to JunkbusterNG # - configure/configure.in: no change needed # - GNUmakefile.in: # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz # - PROGRAM = jbng # - rh-spec now references as junkbusterng-rh.spec # - redhat-upload: references changed to junkbusterng-* (package names) # - tarball-dist: references changed to JunkbusterNG-distribution-* # - tarball-src: now JunkbusterNG-* # - install: initscript now junkbusterng.init and junkbusterng (when # installed) # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec # - junkbusterng.spec: # - References to the expression ijb where changed where possible # - New package name: junkbusterng (all in lower case, acording to # the LSB recomendation) # - Version changed to: 2.9.13 # - Release: 1 # - Added: junkbuster to obsoletes and conflicts (Not sure this is # right. If it obsoletes, why conflict ? Have to check it later) # - Summary changed: Stefan, please check and aprove it # - Changes description to use the new name # - Sed string was NOT changed. Have to wait to the manpage to # change first # - Keeping the user junkbuster for now. It will require some aditional # changes on the script (scheduled for the next specfile release) # - Added post entry to move the old logfile to the new log directory # - Removing "chkconfig --add" entry (not good to have it automaticaly # added to the startup list). # - Added preun section to stop the service with the old name, as well # as remove it from the startup list # - Removed the chkconfig --del entry from the conditional block on # the preun scriptlet (now handled on the %files section) # - junkbuster.init: renamed to junkbusterng.init # - junkbusterng.init: # - Changed JB_BIN to jbng # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to # be used where necessary (config dir) # # Aditional notes: # - The config directory is /etc/junkbuster yet. Have to change it on the # specfile, after it is changes on the code # - The only files that got renamed on the cvs tree were the rh specfile and # the init file. Some file references got changes on the makefile and on the # rh-spec (as listed above) # # Revision 1.18 2002/03/21 23:00:00 swa # want to autogenerate stuff. # # Revision 1.17 2002/03/19 19:30:04 morcego # - Fixing stylesheet checking on configure. If it is found, no further checks # should be done # # - configure will now check for db2html or docbook2html (should work now # on SuSe without the docbktls package) # # Revision 1.16 2002/03/14 22:32:32 hal9 # Bumped the RPM version. # # Revision 1.15 2002/03/08 20:00:28 swa # some leftovers. # # Revision 1.14 2002/03/07 18:25:56 swa # synced redhat and suse build process # # Revision 1.13 2002/03/07 17:17:56 oes # (Hopefully) fixed for older make versions # # Revision 1.12 2002/03/07 15:28:27 swa # more informative # # Revision 1.11 2002/03/06 14:33:18 sarantis # Use proper temp file, not "abc". # # Revision 1.10 2002/03/06 14:19:35 sarantis # Cleanup PID_FILE_PATH from redhat-dist target # # Revision 1.9 2002/03/05 17:31:11 morcego # Search for docbook.dsl. Should solve portability problems for SuSe. # # Revision 1.8 2002/03/05 14:07:42 morcego # configure now detects rpm topdir, and change GNUmakefile acordingly # (based on sugestion by Sarantis Paskalis) # # Revision 1.7 2002/03/05 13:43:28 morcego # Checking for text browser, so redhat-dok can work. # # Revision 1.6 2002/03/05 13:10:51 morcego # Changes to implement redhat-dok (Hal Burgiss) # Changes to make it work on other distros and out-of-the-shelf configurations # # Revision 1.5 2002/02/27 15:30:39 hal9 # Reset $(RPM_PACKAGEV) to 1 (was 2) # # Revision 1.4 2002/01/17 21:44:04 jongfoster # Adding urlmatch.[ch] # # Revision 1.3 2002/01/04 15:26:08 oes # Added tarball-src target # # Revision 1.2 2001/12/30 14:07:31 steudten # - Add signal handling (unix) # - Add SIGHUP handler (unix) # - Add creation of pidfile (unix) # - Add action 'top' in rc file (RH) # - Add entry 'SIGNALS' to manpage # - Add exit message to logfile (unix) # # Revision 1.1 2001/12/01 11:22:57 jongfoster # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of # make break in a more obvious way. # Adding .PHONY section. # # Revision 1.40 2001/12/01 00:24:11 jongfoster # Renaming various config files # Fixing CR->CRLF under Win32 (I hope) # # Revision 1.39 2001/11/06 12:07:30 steudten # Add --clean for building rpm in target redhat-dist. # # Revision 1.38 2001/11/05 21:35:23 steudten # Complete rewrite for the 'redhat-dist' target. # Checks for writeable RPM build directories for calling user. # So you must not be root, just set the modes to 1777 to # build a RH package. # Fix the upload-target to be arch independant. # Add target for 'solaris-dist' - coming soon. # # Revision 1.37 2001/11/01 00:52:04 hal9 # Redhat-upload stuff per Stefan. # # Revision 1.36 2001/10/31 19:26:13 swa # automate process of uploading new releases # to sf. # # Revision 1.35 2001/10/15 22:14:59 joergs # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in # the general CFLAGS already. # # Revision 1.34 2001/10/15 18:28:06 steudten # remove config.cache for target clobber. # Cleanup make dist for RH and S.u.S.E. # # Revision 1.33 2001/10/10 12:43:33 oes # Added ugly hack to make install target work at least for some setups. # # Revision 1.32 2001/10/09 22:38:19 jongfoster # Correcting actionsfile filename for Win32 INI build # # Revision 1.31 2001/09/23 10:13:48 swa # upload process established. run make webserver and # the documentation is moved to the webserver. documents # are now linked correctly. # # Revision 1.30 2001/09/19 17:55:49 oes # Fixed CFLAGS # # Revision 1.29 2001/09/16 17:34:27 jongfoster # Removing showargs.[ch], adding cgi(simple|edit).[ch] # Replacing $(OBJEXT) with o - this seems to be a common source # of build problems. # # Revision 1.28 2001/09/13 15:19:08 swa # we want text files as well. # # Revision 1.27 2001/09/13 13:11:37 steudten # # Replace DEBUG_CFLAGS with OTHER_CFLAGS # # Revision 1.26 2001/09/12 23:44:54 david__schmidt # Mac OSX (Darwin) support added. # # Revision 1.25 2001/09/12 22:55:45 joergs # AmigaOS support added. # # Revision 1.24 2001/09/12 17:28:59 david__schmidt # # OS/2 port: update autoconf'd support for the platform. # # Revision 1.23 2001/09/12 16:28:42 swa # added "make dok" section to generate html pages from # the sgml source documents. note that the we do not want # generated stuff in cvs. # # Revision 1.22 2001/09/10 16:31:23 swa # buildroot definition in the specfile fucks up the build # process under suse. hence I moved it to the "rpm -ta" # command # # Revision 1.21 2001/09/10 11:12:49 oes # Turning on -Wall # # Revision 1.20 2001/08/02 22:04:29 jongfoster # Removing some remaining references to obsolete w32rulesdlg.[ch] # # Revision 1.19 2001/07/30 22:14:03 jongfoster # Removing obsolete w32rulesdlg.c and w32rulesdlg.h # # Revision 1.18 2001/07/29 17:09:17 jongfoster # Major changes to build system in order to fix these bugs: # - pthreads under Linux was broken - changed -lpthread to -pthread # - Compiling in MinGW32 mode under CygWin now correctly detects # which shared libraries are available # - Solaris support (?) (Not tested under Solaris yet) # # Revision 1.17 2001/07/28 16:44:54 oes # Fixed sed LF->CRLF conversion and removed deprecated files # # Revision 1.16 2001/07/15 19:45:33 jongfoster # Added support for linking with POSIX threads library # # Revision 1.15 2001/07/13 13:48:07 oes # - Moved STATIC #define for pcre to (ac)config.h # - Made -Ipcre depandant on static pcre compilation to # avoid version conflicts # - Included compilation and depandancies for new deanimate.c # - Made changes to the pcre/pcreposix/pcrs build process # as required by the new library autodetection in # configure.in # # Revision 1.14 2001/07/01 16:27:44 oes # Fixed misplaced dependancy # # Revision 1.13 2001/06/29 13:18:36 oes # - added depandancy of filters.o on cgi.h # # Revision 1.12 2001/06/12 17:15:56 swa # fixes, because a clean build on rh6.1 was impossible. # GZIP confuses make, %configure confuses rpm, etc. # # Revision 1.11 2001/06/11 11:26:35 sarantis # RPM version should be the same as ijbswa version. The rpm release is # specified in the specfile. # # Revision 1.10 2001/06/07 17:27:45 swa # added suse build section # # Revision 1.9 2001/06/04 18:31:58 swa # files are now prefixed with either `confdir' or `logdir'. # `make redhat-dist' replaces both entries confdir and logdir # with redhat values # # Revision 1.8 2001/06/04 10:44:57 swa # `make redhatr-dist' now works. Except for the paths # in the config file. # # Revision 1.7 2001/06/03 17:09:09 swa # swa for oes: reversed my earlier change # # Revision 1.6 2001/06/03 17:07:27 swa # swa for oes # # Revision 1.5 2001/06/03 13:57:26 swa # compile cgi.c (for andreas' GUI) # # Revision 1.4 2001/05/31 21:18:45 jongfoster # Added files actions.[ch], actionlist.h, list.[ch] to Makefile # # Revision 1.3 2001/05/29 20:02:48 joergs # Changes for AmigaOS added. # # Revision 1.2 2001/05/17 22:23:23 oes # - Added auto-generation of CRLFs for Win32 config files # - Added comment-prefix to all Win32-only options in the config file # and provided auto stripping of this prefix for the Win32 platform by make # # Revision 1.1.1.1 2001/05/15 13:59:00 oes # Initial import of version 2.9.3 source tree # #