dan
/
tor-android
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
tor-android/external/privoxy/GNUmakefile

2157 lines
85 KiB
Makefile
Raw Normal View History

adding in privoxy directly to Orbot repo
2012-05-03 18:32:18 +00:00
# Note: Makefile is built automatically from Makefile.in
#
# $Id: GNUmakefile.in,v 1.180 2009/02/28 08:28:14 fabiankeil Exp $
#
# Written by and Copyright (C) 2001 - 2008 the SourceForge
# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
# by and Copyright (C) 1997 Anonymous Coders and
# Junkbusters Corporation. http://www.junkbusters.com
#
# This program is free software; you can redistribute it
# and/or modify it under the terms of the GNU General
# Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at
# your option) any later version.
#
# This program is distributed in the hope that it will
# be useful, but WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE. See the GNU General Public
# License for more details.
#
# The GNU General Public License should be included with
# this file. If not, you can view it at
# http://www.gnu.org/copyleft/gpl.html
# or write to the Free Software Foundation, Inc., 59
# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
#############################################################################
# Set make command correctly
#############################################################################
#############################################################################
# Version number (for RPM)
#############################################################################
VERSION_MAJOR = 3
VERSION_MINOR = 0
VERSION_POINT = 12
CODE_STATUS = stable
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
RPM_VERSION = $(VERSION)
RPM_PACKAGEV = ""
SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
#############################################################################
# "make install" directories and variables
#############################################################################
#User Group paras
USER =
GROUP =
datarootdir = ${prefix}/share
updated privoxy files
2012-06-05 16:05:39 +00:00
prefix = /usr/local
adding in privoxy directly to Orbot repo
2012-05-03 18:32:18 +00:00
exec_prefix = ${prefix}
CONF_BASE = ${prefix}/etc
SBIN_DEST = ${exec_prefix}/sbin
MAN_DIR = ${datarootdir}/man
MAN_DEST = $(MAN_DIR)/man1
SHARE_DEST = ${datarootdir}
DOC_DEST = $(SHARE_DEST)/doc/privoxy
VAR_DEST = ${prefix}/var
LOGS_DEST = $(VAR_DEST)/log/privoxy
PIDS_DEST = $(VAR_DEST)/run
# if $prefix = /usr/local then the default CONFDEST change from
# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
# by the target rule CONF_DEST
#
# also if the $prefix is /usr/local and there is no
# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
# instead in this situation
#
# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
# changes this to /var for storing the logs and pidfile
# used in source dir only, the install goes to $share_dest/doc/privoxy
DOK_WEB = doc/webserver/
# Install usage should be compatible with install-sh.
INSTALL = /usr/bin/install -c
# Binaries
BIN_MODE = 0755
# Support files, docs, etc.
RA_MODE = 0664
# Directory
DIR_MODE = 0755
# Files daemon writes to.
RWD_MODE = 0660
INSTALL_P = -m $(BIN_MODE)
INSTALL_T = -m $(RA_MODE)
INSTALL_D = -m $(DIR_MODE) -d
INSTALL_R = -m $(RWD_MODE)
# install options for superuser install
#INSTALL_S = -g -o
#############################################################################
# Build tools
#############################################################################
PROGRAM = privoxy
updated privoxy files
2012-06-05 16:05:39 +00:00
CC = /home/n8fr8/dev/android/ndk/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc --sysroot=/home/n8fr8/dev/android/ndk/platforms/android-8/arch-arm
adding in privoxy directly to Orbot repo
2012-05-03 18:32:18 +00:00
ECHO = echo
GZIP_PROG = gzip
# id -u is not universal. FIXME: need to set from configure. Breaks on
# Solaris.
#ID = id -u
ID = id
updated privoxy files
2012-06-05 16:05:39 +00:00
LD = /home/n8fr8/dev/android/ndk/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc --sysroot=/home/n8fr8/dev/android/ndk/platforms/android-8/arch-arm
adding in privoxy directly to Orbot repo
2012-05-03 18:32:18 +00:00
RM = rm -f
CP = cp -f
RMDIR = rmdir
MKDIR = ./mkinstalldirs
STRIP_PROG = strip
SED = sed
GREP = grep
CAT = cat
RPM = rpm
RPMBUILD = rpmbuild
MV = mv
TAR = tar
LN = ln
TOUCH = touch
KILL = kill
CHMOD = chmod
CHOWN = chown
CHGRP = chgrp
GROUPS = groups
WDUMP = -dump
JADECAT =
JADEBIN = false
DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
DB2HTML = false
MAN2HTML = false
G2H_CMD = groff -mandoc -Thtml
TARGET_OS = arm-linux-eabi
PERL = perl
DOC_DIR = doc/source
DOC_TMP = $(DOC_DIR)/tmp
DOC_STATUS = p-stable
# Program to do LF->CRLF
#
# The sed version should be the most portable, but it doesn't for for me,
# the other two do. FIXME.
# - Jon
#DOSFILTER = $(SED) -e $$'s,$$,\r,'
#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
#############################################################################
# Setup for make distribution rh and suse for now
#############################################################################
TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
RPM_BASE = /home/n8fr8/rpmbuild
#############################################################################
# We include these files in our distributions
#############################################################################
CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
CONFIG_FILES = $(CONFIGS) \
`find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
`find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
`find doc/webserver/ -name "*.css"` \
privoxy.1
#############################################################################
# Filenames and libraries
#############################################################################
C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
errlog.c filters.c gateway.c jbsockets.c jcc.c \
list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
urlmatch.c
C_OBJS = $(C_SRC:.c=.o)
C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
W32_SRC = #w32log.c w32taskbar.c win32.c w32svrapi.c
W32_FILES = #w32.res
W32_OBJS = #$(W32_SRC:.c=.o) $(W32_FILES)
W32_HDRS = #w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h
W32_LIB = #-lwsock32 -lcomctl32
W32_INIS = #config.txt trust.txt
PCRS_SRC = pcrs.c
PCRS_OBJS = $(PCRS_SRC:.c=.o)
PCRS_HDRS = $(PCRS_SRC:.c=.h)
PCRE_SRC = pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
PCRE_OBJS = $(PCRE_SRC:.c=.o)
PCRE_HDRS = pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
# No REGEX (maybe because dynamically linked pcreposix):
REGEX_SRC =
REGEX_SRC = pcre/pcreposix.c
REGEX_OBJS = $(REGEX_SRC:.c=.o)
REGEX_HDRS = $(REGEX_SRC:.c=.h)
# Dependencies introduced by #include "project.h".
PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) pcre/pcre.h
# Socket libraries for platforms that need them explicitly defined
SOCKET_LIB =
# PThreads library, if needed.
updated privoxy files
2012-06-05 16:05:39 +00:00
PTHREAD_LIB =
adding in privoxy directly to Orbot repo
2012-05-03 18:32:18 +00:00
SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
LIBS = -lz $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
#############################################################################
# Compiler switches
#############################################################################
# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
# Win32 GUI build.
# The flag "-pthread" is required if using Pthreads under Linux (and
# possibly other OSs).
SPECIAL_CFLAGS =
# Add your flags here
OTHER_CFLAGS =
updated privoxy files
2012-06-05 16:05:39 +00:00
CFLAGS = -pipe -DANDROID -I/home/n8fr8/dev/gp/repos/orbot/external/include -I/home/n8fr8/dev/android/ndk/platforms/android-8/arch-arm/usr/include -fdata-sections -ffunction-sections -Os $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
adding in privoxy directly to Orbot repo
2012-05-03 18:32:18 +00:00
-Ipcre
updated privoxy files
2012-06-05 16:05:39 +00:00
LDFLAGS = -L/home/n8fr8/dev/gp/repos/orbot/external/lib -L/home/n8fr8/dev/android/ndk/platforms/android-8/arch-arm/usr/lib -Wl,--gc-sections $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
adding in privoxy directly to Orbot repo
2012-05-03 18:32:18 +00:00
#############################################################################
# Build section.
#
# There should NOT be any targets above this line.
#############################################################################
all: $(PROGRAM) default.action
#############################################################################
# Phony targets
#############################################################################
.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \
PID_DEST check_doc install-strip uninstall GROUP_T
#############################################################################
# Define this explicitly because Solaris is broken!
#############################################################################
%.o: %.c
$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
#############################################################################
# Strip master copy comments from default.action:
#############################################################################
default.action: default.action.master
$(GREP) -v '^#MASTER#' $< > $@
#############################################################################
# Win32 config files
#############################################################################
inifiles: $(W32_INIS)
config.txt: config
$(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
-e 's!\logfile logfile!logfile privoxy.log!' \
-e 's!#Win32-only: !!' \
< $< | \
$(DOSFILTER) > $@
# LF to CRLF in default.action
$(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
# LF to CRLF in default.filter
$(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
trust.txt: trust
$(DOSFILTER) < $< > $@
#############################################################################
# Pre-dist check:
#############################################################################
dist-check:
@if [ -d CVS ]; then \
$(ECHO) "***************************************************"; \
$(ECHO) "*** ***"; \
$(ECHO) "*** WARNING ***"; \
$(ECHO) "*** ***"; \
$(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
$(ECHO) "*** that you are trying to build a distribution ***"; \
$(ECHO) "*** package based on a checked out, not an ***"; \
$(ECHO) "*** exported copy of the source tree. Please ***"; \
$(ECHO) "*** see \"Releasing a new version\" in the ***"; \
$(ECHO) "*** developer manual. ***"; \
$(ECHO) "*** ***"; \
$(ECHO) "***************************************************"; \
$(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
$(ECHO) -n "really want to proceed: "; \
read answer; \
if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
fi;
#############################################################################
# create tar.gz from CVS:
# This make-target is usually called through 'create-archive'. If you
# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
# tar.gz with the current date in the name and as a releasenumber in the
# spec-file. But the main usage is to run it as follows (Red Hat example):
# make SNAPVERSION=1.6x create-snapshot
# This creates a tar.gz and spec-file for a Red Hat 6.x version.
#############################################################################
create-snapshot:
@tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
[ x"$$tag" = x"(none)" ] && tag=HEAD; \
echo "*** Creating package from $$tag!"; \
TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
cd $$TMPDIR/current; \
TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
privoxy-rh.spec > $$TMPFILE ; then \
$(MV) -f $$TMPFILE privoxy-rh.spec; \
else \
$(ECHO) "Could not set version info in specfile."; \
exit 1;\
fi;\
if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
privoxy-suse.spec > $$TMPFILE ; then \
$(MV) -f $$TMPFILE privoxy-suse.spec; \
else \
$(ECHO) "Could not set version info in specfile."; \
exit 1;\
fi; \
$(RM) $$TMPFILE; \
cd $$TMPDIR/current; \
$(TAR) --exclude ".cvsignore" --exclude "CVS" \
-czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
$(RM) -rf $$TMPDIR
@echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz"
#############################################################################
# looks at the version of Makefile and exports a corresponding source-tree
# example: if the Makefile has the sticky tag v_2_9_13, you'll get
# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
# Red Hat and one for SuSe (different spec-files)
#############################################################################
create-archive:
make SNAPVERSION=$(SNAPVERSION) create-snapshot
#############################################################################
# RPM specifice stuff (SuSE or Redhat, ..)
#############################################################################
rpm-stuff: dist-check clean clobber
for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
if [ ! -w $(RPM_BASE)/$$dir ]; then \
$(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
$(ECHO) "Or add a suitable path to .rpmmacros like."; \
$(ECHO) "%_topdir /home/foo/rpm-build"; \
exit 1; \
fi; \
done; \
check-release:
@if [ "$(RPM_PACKAGEV)" = "" ]; then \
echo ; \
echo " ERROR: NO RPM_PACKAGEV VALUE"; \
echo " No value given for RPM_PACKAGEV. Please use:"; \
echo " make dist-upload RPM_PACKAGEV=release"; \
echo " where \"release\" is the release number you want to and"; \
echo " where \"dist\" is the name of the distro (redhat or suse)"; \
echo ; \
echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
echo ""; \
echo "ATTENTION: If your distribution use a specific tag on the"; \
echo " release field (like \"cl\" for Conectiva, and"; \
echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
echo " Do it like you would do for a redhat package,"; \
echo " (i.e. just the number)."; \
echo ; \
exit 1; \
fi
#############################################################################
# Create Conectiva specfile from RedHat specfile
#############################################################################
conectiva-spec:
$(RM) privoxy-cl.spec
chmod a+x genclspec.sh
./genclspec.sh
#############################################################################
# Conectiva distribution for x86
#############################################################################
conectiva-dist: rpm-stuff conectiva-spec
$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
$(RPMBUILD) --clean -ta $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
conectiva-upload: check-release
make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
#############################################################################
# redhat distribution alpha and x86
#############################################################################
redhat-dist: rpm-stuff
echo $(CONFIG_FILES)
$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
$(RPMBUILD) --clean -ta $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
# For testing build issues only! Use redhat-dist for official releases.
redhat-test:
echo $(CONFIG_FILES)
$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
$(RPMBUILD) --clean -tb $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
@echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
# anonymously ncftps the rpms to sourceforge
redhat-upload: check-release
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
@$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
# w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
#############################################################################
# Creates a Red Hat sourcepackage from CVS (not from the current sources
# on disk)
#############################################################################
redhat-srpm:
make create-archive
$(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
#############################################################################
# suse distribution. works fine. no need to be root.
#############################################################################
suse-dist: rpm-stuff
# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
# privoxy-suse.spec > $$TMPFILE ; then \
# $(MV) -f $$TMPFILE privoxy-suse.spec; \
# else \
# $(ECHO) "Could not set version info in specfile."; \
# exit 1;\
# fi
$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
$(RPMBUILD) --clean -ta $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
# anonymously ncftps the rpms to sourceforge
suse-upload: check-release
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
@$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
# handle with care. use with root.
suse-clean:
$(RPM) -e junkbuster-suse || true
$(RM) -r /etc/junkbuster
$(RM) -r /etc/rc.d/junkbuster*
$(RM) -r /var/run/junkbuster.pid
$(RM) -r /var/log/junkbuster
$(RM) /etc/init.d/junkbuster
$(RM) /usr/sbin/junkbuster
$(RM) /usr/sbin/rcjunkbuster
$(RM) /usr/share/man/man1/junkbuster.1.gz
$(RPM) -e privoxy-suse || true
$(RM) -r /etc/privoxy
$(RM) -r /etc/rc.d/privoxy*
$(RM) -r /var/run/privoxy.pid
$(RM) -r /var/log/privoxy
$(RM) /etc/init.d/privoxy
$(RM) /usr/sbin/privoxy
$(RM) /usr/sbin/rcprivoxy
$(RM) /usr/share/man/man1/privoxy.1.gz
#############################################################################
# generic distribution
#############################################################################
gen-dist: dist-check
@$(ECHO) ""
@$(ECHO) "You have run autoconf && autoheader && ./configure right?"
@$(ECHO) ""
$(MAKE) $(PROGRAM)
$(STRIP_PROG) $(PROGRAM)
$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
# add program
(cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
# add config files
for foo in $(CONFIG_FILES); do \
(cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
done;
# add documentation
for foo in $(DOC_FILES); do \
(cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
done;
# and zip the archive
$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
$(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
@$(ECHO) Distribution with binary created.
# anonymously ncftps the package to sourceforge
gen-upload:
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
@$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
# use with care
gen-clean:
$(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
#############################################################################
# solaris distribution. verified on SF machines by swa.
#############################################################################
solaris-dist: gen-dist
@$(ECHO) Done.
# anonymously ncftps the package to sourceforge
solaris-upload: gen-upload
@$(ECHO) Done.
# use with care
solaris-clean: gen-clean
@$(ECHO) Done.
#############################################################################
# hpux distribution
#############################################################################
hpux-dist:
@$(ECHO) coming soon.
hpux-upload:
@$(ECHO) coming soon.
#############################################################################
# debian distribution
#############################################################################
debian-dist:
@$(ECHO) coming soon.
debian-upload:
@$(ECHO) coming soon.
#############################################################################
# macosx distribution
#############################################################################
macosx-dist:
@$(ECHO) coming soon.
macosx-upload:
@$(ECHO) coming soon.
#############################################################################
# amiga distribution
#############################################################################
amiga-dist:
@$(ECHO) coming soon.
amiga-upload:
@$(ECHO) coming soon.
#############################################################################
# freebsd distribution. verified on SF machines by swa.
#############################################################################
freebsd-dist: gen-dist
@$(ECHO) Done.
# anonymously ncftps the package to sourceforge
freebsd-upload: gen-upload
@$(ECHO) Done.
# use with care
freebsd-clean: gen-clean
@$(ECHO) Done.
#############################################################################
# Windows distribution
#############################################################################
win-dist:
$(ECHO) Not implemented.
#############################################################################
# Tarball distribution: No CVS dirs, dotfiles, debian build dir,
# (FIXME:) only parts of the static / generated docs mix in doc/webserver
#############################################################################
tarball-dist: dist-check clean clobber
$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
-o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
-name "PACKAGERS" \)`; do \
files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
done && \
cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
# and zip the archive
$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
$(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
@$(ECHO) Tarball distribution created.
# anonymously ncftps the tarball to sourceforge
tarball-upload:
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
@$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
tarball-clean:
$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
#############################################################################
#
# Documentation
#
# converts doc/source/*.sgml into html and man pages
#
#############################################################################
# developer manual
dok-devel:
$(RM) doc/webserver/developer-manual/*.html
$(RM) -r doc/source/developer-manual
mkdir -p doc/source/developer-manual
cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
# user manual
dok-user:
$(RM) doc/webserver/user-manual/*.html
$(RM) -r doc/source/user-manual/
mkdir -p doc/source/user-manual
cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
# FIXME: temp fix so same stylesheet gets in more than one place so it works
# for all doc set-ups, including the 'user manual' config option in local
# system where it MUST be in same directory as html.
$(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
# faq
dok-faq:
$(RM) doc/webserver/faq/*.html
$(RM) -r doc/source/faq
mkdir -p doc/source/faq
cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
# man page, one variation. Try to use the next target, just 'make man'.
dok-man:
$(RM) doc/man/* doc/webserver/man-page/*.html
ifneq ($(MAN2HTML),false)
$(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
$(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
else
$(MAKE) groff2html
endif
# Build man page from sgml. This requires the SGMLSpm perl module.
# See CPAN, or your favorite perl repository. This is the preferred
# target for man page generation!
man: dok-release
mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
perl -pi.bak -e "s/\[ /\[/g;s/<2F>/\\\\['a]/g;s/<2F>/\\\\['e]/g" privoxy.1; \
perl -pi.bak -e "s/<2F>/\\\\[:o]/g" privoxy.1; \
perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
$(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
# For those with man2html ala RH7s.
man2html:
mkdir -p doc/webserver/man-page
ifneq ($(MAN2HTML),false)
$(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
$(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
$(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
# Twice because my version of man2html is pulling in commas and periods in URLs.
$(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
$(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
$(PERL) -pi.bak -e "s/\['a\]/\&aacute;/g;s/\['e\]/\&eacute;/g" tmp.html
# Get rid of spurious  from conversion. (How to do this with perl?)
$(SED) -e 's///g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
else
$(MAKE) groff2html
endif
# Otherwise we get plain groff conversion.
groff2html:
$(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
# readme page and INSTALL file
dok-readme: dok-release
cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
env -u LANG $(WDUMP) tmp.html > ../../README ;\
$(DB)-notoc -V nochunks install.sgml > tmp.html &&\
env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
$(RM) tmp.*
# index.sgml is used to create both the Home Page, and a local index
# for documentation, etc.
#
# index.html for webserver:
dok-webserver:
cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
s/__copy/&copy;/'\
doc/webserver/index.html && $(RM) doc/webserver/*.bak
# privoxy-index.html for local documentation:
dok-index:
cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
s/__copy/&copy;/' \
doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
# Main documentation target.
dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
@$(ECHO) Documentation created.
#
# an alternative to the above dok. disabled man page creation for the moment
#
redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
@$(ECHO) Documentation created.
## Make README
redhat-readme:
cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
tmp.html > ../../README && $(RM) -r tmp.html
## Make AUTHORS file
dok-authors:
cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
tmp.html > ../../AUTHORS && $(RM) tmp.html
# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
# exceptions accordingly. This needs to go before any doc building (doh).
dok-release:
@$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
@$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
doc/source/*sgml doc/source/*/*sgml
$(RM) -r doc/source/*bak doc/source/*/*bak
ifeq ($(CODE_STATUS),stable)
@$(ECHO) Setting docs to stable $(VERSION)
@$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
doc/source/*sgml doc/source/*/*sgml
$(RM) -r doc/source/*bak doc/source/*/*bak
else
@$(ECHO) Setting docs to not stable $(VERSION)
@$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
doc/source/*sgml doc/source/*/*sgml
$(RM) -r doc/source/*bak doc/source/*/*bak
endif
# Create release announcement in text and html, with short and long versions.
# This is a standalone target, and must be invoked directly.
# announce: dok-release
# mkdir -p $(DOC_TMP)
# cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
# cd $(DOC_TMP) && $(DB) announce.sgml &&\
# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
# mv -f *html *txt ../../..
# rm -fr $(DOC_TMP)
# The main Privoxy config file, generated from sgml sources.
# NOTE: This will require some hand editing. The new file is outputted
# as config.new so that problem sections can be compared to previous
# version. This is hardcored to w3m for html/text conversion. Also,
# requires the shell util 'fmt'.
config-file: dok-release
cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
$(PERL) -i.bak utils/prepare-configfile.pl config.new
$(RM) *.bak
@$(ECHO) "****************************************************"
@$(ECHO) "The output file is config.new."
@$(ECHO) "Now -- you need to hand edit the results!!!"
@$(ECHO) "In particular, check the Debug levels, the"
@$(ECHO) "permit-access, forward & socks examples and the"
@$(ECHO) "various user-manual examples, which all"
@$(ECHO) "probably got hammered."
@$(ECHO) "****************************************************"
# config file, alternate version using lynx (perl stuff unfinished). Lynx
# does not do so good a job.
config-file-alt:
cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
$(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
$(PERL) -pi -e 's/^( )//;\
s/:$\/:\n/' config.new
#############################################################################
#
# Webserver
#
# moves dokumentation to webserver
#
#############################################################################
webserver: tidy
@$(ECHO) -------------------------------------------------------
@$(ECHO) You will need to "create" a SF shell first:
@$(ECHO) ssh -t USER,PROJECT@shell.sourceforge.net create
@$(ECHO) Please make sure your documentation files are up to date.
@$(ECHO) Note that this command updates the home page and scps
@$(ECHO) all stuff to the webserver, it will not remove obsolete documents.
@$(ECHO) You will also need to change the user-manual symlink manually.
@$(ECHO) -------------------------------------------------------
@$(ECHO) Uploading html
@cd doc/webserver; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
$(TAR) c $$upload | ssh shell.sf.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
@$(ECHO) Fixing permissions
@ssh shell.sf.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
@ssh shell.sf.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
@ssh shell.sf.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
web-actions: tidy
@$(ECHO) Uploading
@cd doc/webserver/actions; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
$(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
@$(ECHO) Fixing permissions
@ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
@ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
##
dok-put:
tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
--exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
doc/* INSTALL LICENSE AUTHORS README \
-czf $(DOC_FILE) ;\
$(ECHO) "Uploading doc package ..." ;\
scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
@ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
$(RM) $(DOC_FILE)
dok-get:
cd /tmp ;\
$(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
$(TAR) -zxvf $(DOC_FILE)
#############################################################################
# Source file dependencies
#############################################################################
actions.o: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
cgi.o: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
cgiedit.o: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
cgisimple.o: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
deanimate.o: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.o: encode.c encode.h config.h
errlog.o: errlog.c errlog.h config.h $(PROJECT_H_DEPS) #w32log.h
filters.o: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h #win32.h
gateway.o: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.o: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
jcc.o: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h #w32log.h win32.h w32svrapi.h cgi.h
list.o: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
loadcfg.o: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h #w32log.h win32.h
loaders.o: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
miscutil.o: miscutil.c miscutil.h config.h
parsers.o: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
ssplit.o: ssplit.c ssplit.h config.h miscutil.h
urlmatch.o: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
# GNU regex
gnu_regex.o: gnu_regex.c gnu_regex.h config.h
# PCRS
pcrs.o: pcrs.c pcrs.h config.h pcre/pcre.h
# PCRE
pcre/get.o: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
pcre/maketables.o: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
pcre/pcre.o: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
pcre/pcreposix.o: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
pcre/study.o: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
# An auxiliary program makes the PCRE default character table source
pcre/chartables.c: pcre/dftables
pcre/dftables >pcre/chartables.c
pcre/dftables: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
$(CC) -o pcre/dftables $(CFLAGS) pcre/dftables.c
# Win32
w32log.o: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
w32taskbar.o: w32taskbar.c config.h w32log.h w32taskbar.h
win32.o: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
windres -D__MINGW32__=0.2 -O coff -i $< -o $@
# AmigaOS
#OBJS += amiga.o
#ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
#CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
#LDFLAGS += -m68020 -noixemul -fbaserel
#LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
#else
#CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
#endif
#amiga.o: amiga.c amiga.h config.h
$(PROGRAM): $(OBJS) $(W32_FILES)
$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
clean:
$(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags` config.base config.tmp
tidy:
$(RM) `find . -name "*~"`
$(RM) `find . -name "#*#"` # Emacs backup files
$(RM) `find . -name ".\#*"`
clobber: tidy
$(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
$(RM) -r autom4te.cache
#
# FIXME: What is all this?
#
$(RM) cscope.* *.pdb *.lib *.exp
distclean: clobber
tags: $(SRCS) $(HDRS)
etags $(SRCS) $(HDRS)
CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
$(ECHO) "$(CONF_BASE)/privoxy";\
else\
$(ECHO) "$(CONF_BASE)";\
fi)
LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
$(ECHO) "/var/log/privoxy" ;\
else\
$(ECHO) "$(LOGS_DEST)";\
fi)
PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
$(ECHO) "/var/run" ;\
else\
$(ECHO) "$(PIDS_DEST)";\
fi)
check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
$(ECHO) "1";\
else\
$(ECHO) "0";\
fi)
# If USER is specified but no GROUP, assume there is a GROUP of same name.
GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
$(ECHO) "$(USER)" ;\
else\
$(ECHO) "$(GROUP)";\
fi)
install-strip:
$(MAKE) install STRIP=-s
# FIXME: Test USER and GROUP on Slack to make sure this works as
# intended.
#
# FIXME: id handling needs help, probably via configure, since 'id -u' is not
# universally reliable (eg Solaris). Group handling could be better.
# Perhaps the whole user/group validation should be done here, and simplified.
PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
@# Quick test for valid USER.
@if [ -n "$(USER)" ]; then \
$(ID) $(USER) >/dev/null || exit 1;\
fi
@# Test for valid group. FIXME. USER does not have to belong to GROUP
@# for file ownership purposes.
# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
# fi
@$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
$(CHMOD) $(DIR_MODE) $(MKDIR)
@$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \
$(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \
$(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST)
@# Install the executable binary, strip if invoked as install-strip
@test -n "$(STRIP)" &&\
$(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
$(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST)
$(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST)
@# Install the DOCS and man page. install-sh only does one file at a time.
@# FIXME: only handles jpegs.
-@if [ $(check_doc) = 0 ]; then \
DOC=$(DOC_DEST) ;\
else \
DOC=$(prefix)/doc/privoxy ;\
fi;\
$(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \
$(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\
if [ -d "$(DOK_WEB)" ]; then \
$(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\
for i in user-manual developer-manual faq; do \
for ii in $(DOK_WEB)/$$i/*html; do \
$(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\
done ;\
done ;\
for i in $(DOK_WEB)/user-manual/*jpg; do \
$(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\
done ;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\
$(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\
$(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\
$(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\
$(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
fi
@# Not all platforms support gzipped man pages.
@$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
-$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
@# Change the config file default directories according to the configured ones
@$(ECHO) Rewriting config for this installation
@if [ -f config.base ] ; then \
$(CAT) config >config~ ;\
$(MV) config.base config ;\
fi
$(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
$(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
-@if [ $(check_doc) = 0 ]; then \
$(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\
else \
$(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
fi;\
$(MV) config config.base
$(MV) config.updated config
@# Install the config support files. Test for root install, and abort
@# if there is no privoxy user, and no other user was enabled during
@# configure. Later, install init script if appropriate.
@$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
@for i in `find templates -type f`; do \
$(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\
done
@# FIXME: group/user validation is overly convoluted.
@# If superuser install ... we require a minimum of group ownership
@# of those files the daemon writes to, to be non-root owned.
@if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
if [ x$(USER) = x ] || [ $(USER) = root ]; then \
if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
if [ "`$(ID) privoxy`" ] && \
$(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
$(ECHO) "Warning: Setting group owner to privoxy";\
GROUP_T=privoxy ;\
else \
$(ECHO) "******************************************************************" ;\
$(ECHO) " WARNING! WARNING! installing config files as root!" ;\
$(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
$(ECHO) " and to install the config files as that user and/or group!" ;\
$(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
$(ECHO) "*******************************************************************" ;\
exit 1 ;\
fi ;\
else \
GROUP_T=$(GROUP) ;\
fi ;\
INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
else \
$(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
GROUP_T=$(GROUP_T) ;\
fi ;\
else \
if [ ! "`id $(USER)`" = "`id`" ] ;then \
$(ECHO) "** WARNING ** current install user different from configured user!!" ;\
$(ECHO) "Edit may fail." ;\
fi ;\
INSTALL_CONF="$(INSTALL_R)" ;\
fi ;\
$(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
for i in $(CONFIGS); do \
if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \
$(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
$(ECHO) Installing fresh $$i;\
$(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
elif [ -s "$(CONF_DEST)/$$i" ]; then \
$(ECHO) Installing $$i as $$i.new ;\
$(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\
NEW=1;\
else \
$(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
fi ;\
done ;\
if [ -n "$$NEW" ]; then \
$(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\
$(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
fi ;\
[ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
$(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
$(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
if [ x$$USER != x ]; then \
$(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
if [ x$$GROUP_T != x ]; then \
$(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
$(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
$(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
$(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
$(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
$(SED) 's+%USER%+$(USER)+' | \
$(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
$(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
$(ECHO) "Installing for Slackware." ;\
$(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
$(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
$(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
$(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
$(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
$(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
$(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\
$(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\
$(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\
elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
$(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
$(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
$(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\
fi ;\
else \
$(ECHO) "No init script installed, install it manually if needed" ;\
fi
$(RM) config.base config.tmp
@# mmmmm, good.
@$(ECHO) "$(PROGRAM_V) installation succeeded!"
@$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)"
# rmdir is used as a precaution since it will not remove non-empty
# directories. RH init script creates lock file and pid file.
uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
@$(ECHO) Starting Privoxy uninstallation
@# KILL privoxy if running
@# XXX: the chkconfig line may need a DESTDIR prefix.
-@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \
$(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
chkconfig --del $(PROGRAM) 2>/dev/null;\
fi
-@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
$(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
-@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
$(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || :
@# Program binary
@$(ECHO) Removing $(PROGRAM) binary
$(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
@# config files and dir, and maybe old install backups
-@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \
$(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\
$(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\
cd $(DESTDIR)$(CONF_DEST) ;\
for i in $(DESTDIR)$(CONFIGS); do \
[ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\
done ;\
fi
@$(ECHO) Removing $(PROGRAM) config files
-@for i in $(DESTDIR)$(CONFIGS); do \
test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
$(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\
done
-@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\
$(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*"
@# man page and docs
@$(ECHO) Removing $(PROGRAM) docs
-$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
-$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
@# Log and pidfile
@$(ECHO) Removing $(PROGRAM) logs
-$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid
@# Final clean up of unused directories. Special handling of CONF and LOG
# destinations.
@$(ECHO) Removing $(PROGRAM) directories
@for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \
if test -d $$i; then \
$(ECHO) Removing $$i ;\
$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
fi;\
done
@if [ ! "$(prefix)" = "/usr/local" ] ;then \
for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \
$(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \
if test -d $$i; then \
$(ECHO) Removing $$i ;\
$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
fi;\
done;\
if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \
$(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\
$(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\
fi ;\
if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \
$(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\
$(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\
fi ;\
if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \
$(ECHO) Removing $(DESTDIR)$(prefix)/var ;\
$(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\
fi ;\
if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \
$(ECHO) Removing $(DESTDIR)$(prefix) ;\
$(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\
$(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\
fi;\
fi
@# init scripts and logrotate
@if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
$(ECHO) Removing $(PROGRAM) init script ;\
if [ -f $(DESTDIR)/etc/slackware-version ] && \
[ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
$(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \
&& [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \
$(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\
elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
$(RM) $(DESTDIR)/etc/init.d/privoxy ;\
else \
$(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
fi ;\
fi
@$(ECHO) Privoxy uninstalled, bye
coffee:
@perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \
-e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \
-e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \
-e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \
-e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
-e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
-e '187,54,220,125,193,51,228,11,1,0,0);' | zcat
#############################################################################
## Local Variables:
## tab-width: 3
## end:
# $Log: GNUmakefile.in,v $
# Revision 1.180 2009/02/28 08:28:14 fabiankeil
# pcrs.o doesn't depend on pcre/pcre.h if we are linking
# dynamically. Patch provided by drauh in #2056286.
#
# Revision 1.179 2009/02/22 14:48:31 hal9
# Updates to the 'make webserver' target that recreates the home page and uploads
# fresh documents to reflect new SF realities, and more explanation of process.
#
# Revision 1.178 2009/02/08 18:35:48 fabiankeil
# Move the match-all section into a separate file
# (match-all.action) so we can safely overwrite the
# default actions when updating. Based on Roland's
# patch #1563977.
#
# Revision 1.177 2009/01/13 16:44:32 fabiankeil
# Delete the standard.action file after moving
# the pre-settings over to the default actions.
#
# Revision 1.176 2008/09/21 13:24:37 fabiankeil
# Add Roland's man page fixes from 19_manpage_fixup.dpatch.
#
# Revision 1.175 2008/08/30 12:03:07 fabiankeil
# Remove FEATURE_COOKIE_JAR.
#
# Revision 1.174 2008/07/18 17:50:47 fabiankeil
# Fix whitespace.
#
# Revision 1.173 2008/06/18 18:28:42 fabiankeil
# Remove PDF-related stuff.
#
# Revision 1.172 2008/06/17 16:16:08 fabiankeil
# - Stop building text files nobody cares about.
# - Update copyright year.
#
# Revision 1.171 2008/06/13 15:24:57 fabiankeil
# Move previously inline'd Perl code for the config-file target
# into a separate file, have it work with older perl releases,
# clean it up a bit and fix the "underlining" code.
#
# Revision 1.170 2008/06/12 16:38:50 fabiankeil
# Add third-level domain to URL in dok-get target.
#
# Revision 1.169 2008/06/09 17:28:31 fabiankeil
# - Recommend https for releasing files.
# - Fix a warning about datarootdir being ignored.
#
# Revision 1.168 2008/05/23 18:03:12 fabiankeil
# - Shorten meta description inserted in dok-webserver
# and dok-index target.
# - In config-file target, unset LANG for w3m as we
# might otherwise end up with multi-byte characters.
#
# Revision 1.167 2008/05/23 14:39:09 fabiankeil
# Silence dok-user complaint about @# not being found.
#
# Revision 1.166 2008/05/23 14:04:57 fabiankeil
# - Get config-file target working with more recent Perl
# versions. The generated file is still messed up, though.
# - Fix comment typo.
#
# Revision 1.165 2008/05/22 16:57:23 fabiankeil
# Fix coffee machine.
#
# Revision 1.164 2008/05/22 10:26:26 fabiankeil
# - Remove parsers.o's dependency on encode.h.
# - Include Emacs backup files in tidy target again.
#
# Revision 1.163 2008/05/04 18:01:53 fabiankeil
# Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h.
#
# Revision 1.162 2008/03/30 13:31:42 fabiankeil
# Add DESTDIR support for the uninstall target.
#
# Revision 1.161 2008/03/30 13:19:13 fabiankeil
# Add DESTDIR support for the install target. Closes PR#1910612.
# Patch by Radoslaw Zielinski with minor modifications.
#
# Revision 1.160 2008/03/27 18:27:19 fabiankeil
# Remove kill-popups action.
#
# Revision 1.159 2008/03/21 11:13:53 fabiankeil
# Only gather host information if it's actually needed.
# Also move the code out of accept_connection() so it's less likely
# to delay other incoming connections if the host is misconfigured.
#
# Revision 1.158 2007/12/11 21:29:25 fabiankeil
# Fix dependency list for cgiedit.c.
#
# Revision 1.157 2007/12/10 02:28:02 hal9
# Unset $LANG for text processing of docs so we get pure text.
#
# Revision 1.156 2007/11/15 03:17:43 hal9
# Some workaround changes to the config file perl stuff and comments, which is
# broken here all by itself on perl 5.8.8.
#
# Revision 1.155 2007/09/22 16:23:25 fabiankeil
# Update copyright line.
#
# Revision 1.154 2007/02/07 11:52:40 fabiankeil
# Fix suse-dist as described in BR#1654052.
# (I didn't test it, but it's done the same
# way in redhat-dist which is known to work).
#
# Revision 1.153 2007/01/07 07:36:36 joergs
# Added AmigaOS4 support.
#
# Revision 1.152 2006/12/13 14:53:51 etresoft
# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
#
# Revision 1.151 2006/11/30 01:08:55 hal9
# Fix problem with variable declarations in the Slackware section. Thanks to higuita.
#
# Revision 1.150 2006/10/25 11:55:45 fabiankeil
# Fix sed regexes for rewriting "confdir ." and "logdir .".
# Thanks to Darel Henman for reporting this.
#
# Revision 1.149 2006/10/11 01:40:28 hal9
# Apply patch from Neil McCalden to fix syntax issue.
#
# Revision 1.148 2006/09/26 10:57:58 hal9
# Including Karsten's patch to fix make create-snapshot.
#
# Revision 1.147 2006/09/13 01:25:16 hal9
# Make sure install forces in new default.action, default.filter, and
# standard.filter. These are privoxy files, not user files.
#
# Revision 1.146 2006/09/08 23:57:19 hal9
# User manual images are now user-manual doc directory, and fix make install
# target accordingly.
#
# Revision 1.145 2006/09/08 02:32:00 hal9
# Various changes to implement building and installing docs to be compatible
# with the new "user-manual" settings in config from Roland. Docbook does not
# seem to like dealing with more than one css file, so workaround that here.
# Change 'make install' so it provides p_doc.css in the user-manual doc
# directory so that functions well, and lastly modify 'make install' so that the
# PATH is automatically set, and the 'user-manual' directive should done during
# the install.
#
# Revision 1.144 2006/09/07 22:53:20 hal9
# Make sure config sgml build related artifacts are cleaned out.
#
# Revision 1.143 2006/09/02 15:59:40 hal9
# Add to code status to make install output.
#
# Revision 1.142 2006/08/29 01:46:24 hal9
# Add user.filter to $CONFIGS.
#
# Revision 1.141 2006/08/12 03:54:37 david__schmidt
# Windows service integration
#
# Revision 1.140 2006/07/18 14:48:45 david__schmidt
# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
# with what was really the latest development (the v_3_0_branch branch)
#
# Revision 1.104.2.28 2004/06/10 17:06:05 hal9
# Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the
# only place it is used.
#
# Revision 1.104.2.27 2004/02/07 16:11:10 oes
# Make clobber remove the autom4te.cache dir.
# Closes BR #889300
#
# Revision 1.104.2.26 2004/01/31 16:32:25 oes
# Adding a check for an htmldoc variant from the debian diff
#
# Revision 1.104.2.25 2004/01/31 01:15:33 oes
# Fixed a typo; updated copyright notice
#
# Revision 1.104.2.24 2003/12/03 10:30:02 oes
# - Added new dependency: actions.c -> ssplit.h
# - Excluded PDF docs from src tarball
#
# Revision 1.104.2.23 2003/04/20 17:28:52 hal9
# Strip trailing spaces from config-file generation, bug #724596.
#
# Revision 1.104.2.22 2003/03/28 03:32:01 hal9
# Minor changes for Privoxy home page:
# - Handle &copy; more sanely
# - include link to announce.txt
# Also, disable 'make announce' target.
#
# Revision 1.104.2.21 2002/11/04 07:04:03 hal9
# Catch up with main trunk install/uninstall. Quiet output, etc.
#
# Revision 1.104.2.20 2002/10/25 02:44:22 hal9
# Port of make install, etc from main trunk. Needs testing! Add Slackware
# support, and other related changes. Update related docs.
#
# Revision 1.104.2.19 2002/09/26 22:50:02 hal9
# New user-manual examples in config-file are getting wrapped. Add warning.
#
# Revision 1.104.2.18 2002/08/23 12:22:40 oes
# Added warning to broken install target
#
# Revision 1.104.2.17 2002/08/16 03:19:34 hal9
# More (minor) cleanup of html before pdf processing to make some relative
# links work as pdf -> pdf. Upload pdf as zip archive now.
#
# Revision 1.104.2.16 2002/08/14 16:43:27 hal9
# Added pdf docs to make webserver target.
#
# Revision 1.104.2.15 2002/08/11 20:02:41 hal9
# New targets for man page (make man) and pdf (make dok-pdf) targets.
#
# Revision 1.104.2.14 2002/08/10 11:19:37 oes
# - Make -Ipcre (again) conditional on STATIC_PCRE
# - $(RPMBUILD) -> $(RPM) for SuSE
# - Add dependency: pcrs.o deps on config.h
#
# Revision 1.104.2.13 2002/08/07 15:13:54 hal9
# Remove pdf2 target, and make it dok-shtml (single page html for pdf
# conversion).
#
# Revision 1.104.2.12 2002/08/06 11:29:36 oes
# Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
#
# Revision 1.104.2.11 2002/07/30 19:38:11 hal9
# Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what
# *I think* it was supposed to be (was breaking upload targets since it was
# set to RPM_VERSION).
#
# Revision 1.104.2.10 2002/07/27 22:56:53 kick_
# cleanups of the redhat-srpm target
#
# Revision 1.104.2.9 2002/07/26 15:17:02 oes
# - Added generation of default.action from defaul.action.master
# - Deleted obsolete re_filterfile.txt generation
#
# Revision 1.104.2.8 2002/07/12 10:04:32 kick_
# added helper targets to the makefile. They shouldn't break anything, but
# make my life a lot easier.
#
# The new rpm has been splitted into two parts, one for package installation/
# removal, one for package building.
# Therefore rpm -ta isn't a valid command anymore and needs to be replaced
# by rpmbuild -ta (this is backwards compatible)
#
# Revision 1.104.2.7 2002/06/07 00:23:47 hal9
# Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
# thus breaking them completely.
#
# Revision 1.104.2.6 2002/06/02 03:26:25 hal9
# Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
# index.html and team/index.html)
#
# Revision 1.104.2.5 2002/05/30 15:35:01 hal9
# This is more cleanup on the make config-file target. Most issues for
# automatic generation are taken care of. There are still some problems
# that require hand editing. Namely, some of the examples that are > 80 chars.
#
# Revision 1.104.2.4 2002/05/29 02:12:17 hal9
# Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
# new target is 'make config-file', _not_ make config.
#
# Revision 1.104.2.3 2002/05/29 02:05:48 hal9
# 'make config' target added (WIP) for future generation of config file from
# text in u-m so the two are in sync. New generated config, which requires
# some hand editing for the time being.
#
# Revision 1.104.2.2 2002/05/28 02:32:55 hal9
# New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
# not being cleaned up in doc/webserver.
#
# Revision 1.104.2.1 2002/05/26 17:19:34 hal9
# Remove Table of Contents from readme with oes's dsl trick.
#
# Revision 1.104 2002/05/24 00:03:49 oes
# Use p_doc.css for the Homepage for consistency
#
# Revision 1.103 2002/05/23 23:19:00 oes
# Use dsl without TOC for the homepage
#
# Revision 1.102 2002/05/16 01:20:17 hal9
# make announce target added.
#
# Revision 1.101 2002/05/15 12:28:46 oes
# Trying to keep Hal happy :)
#
# Revision 1.100 2002/05/08 13:48:18 hal9
# Ooops, that trashed JB v2.0.2 comment. Fixed.
#
# Revision 1.99 2002/05/08 13:42:07 hal9
# This fixes the numbering problem on index.html in contact info section (.1.). Using
# perl, since its way too convoluted to try to fix proper with docbook.
#
# Revision 1.98 2002/05/03 14:33:06 oes
# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
#
# Revision 1.97 2002/04/27 20:27:43 swa
# no longer needed due to new
# PACKAGE_VERSION process
#
# Revision 1.96 2002/04/27 17:44:32 morcego
# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
# - Using the RM macro everywhere rm is called (either we use, or don't)
# - Same for RPM
#
# Revision 1.95 2002/04/27 15:37:25 swa
# replacing directory in document creation process
# no longer necessary.
#
# Revision 1.94 2002/04/27 08:23:29 swa
# pdf process reviewed and cleaned up
#
# Revision 1.93 2002/04/27 04:55:53 morcego
# privoxy-cl.spec now gets removed by clobber target
#
# Revision 1.92 2002/04/27 04:53:40 morcego
# Adding --exclude "PACKAGERS" to every tar command that applies (not for
# webserver target)
#
# Revision 1.91 2002/04/27 04:44:51 morcego
# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
# the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
# conectiva-upload
# genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
# for Conectiva Linux
#
# Revision 1.90 2002/04/26 17:46:53 swa
# be consistent
#
# Revision 1.89 2002/04/26 17:20:54 swa
# just produce single html files to proces them later with Destiller or somesuch. looks prettier.
#
# Revision 1.88 2002/04/25 19:13:57 morcego
# Removed RPM release number declaration on configure.in
# Changed makefile to use given value for RPM_PACKAGEV when on uploading
# targets (will produce an error, explaining who to do it, if no value
# if provided).
#
# Revision 1.87 2002/04/23 14:10:59 swa
# now create pdf documents
#
# Revision 1.86 2002/04/15 04:30:27 hal9
# Missed two -pi.bak's on perl/cygwin problem.
#
# Revision 1.85 2002/04/14 01:05:34 hal9
# Revert dok-webserver change for SF logo.
#
# Revision 1.84 2002/04/13 22:43:25 hal9
# -Fix dok-webserver for SF logo (more perl).
# -Change all perl -pi to perl -pi.bak for Cygwin problem.
#
# Revision 1.83 2002/04/12 09:39:25 oes
# Excluding yet more files from tarball; making dist warning yet more scary
#
# Revision 1.82 2002/04/11 21:07:11 oes
# Excluding more files from tarball build
#
# Revision 1.81 2002/04/11 14:40:27 oes
# Fixed typo -- Thanks, Moritz!
#
# Revision 1.80 2002/04/11 12:50:00 oes
# Fixed tarball-dist target
#
# Revision 1.79 2002/04/11 06:49:28 oes
# webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
#
# Revision 1.78 2002/04/09 13:37:11 sarantis
# fix tar options typo
#
# Revision 1.77 2002/04/09 13:28:53 swa
# build suse and gen-dist with html docs
#
# Revision 1.76 2002/04/08 22:43:41 oes
# Fix: Include dotfiles in fixing webserver permissions
#
# Revision 1.75 2002/04/08 22:14:59 oes
# Silencing tar warnings in the web* targets
#
# Revision 1.74 2002/04/08 15:22:44 hal9
# This has finishing touches for dok building. Should be ready to go.
# -The main doc build is now 'make dok', should work on Redhat too.
# -Removed man page from main doc build. It is built separately due to
# perl scripts that most aren't likely to have.
#
# Revision 1.73 2002/04/08 14:03:24 oes
# oes for al: Fix install target
#
# Revision 1.72 2002/04/08 13:42:11 oes
# Added safety check to *-dist targets; fixed permissions for feedback logfile
#
# Revision 1.71 2002/04/07 20:32:03 hal9
# -Add meta data kludge for make dok-webserver via $(PERL).
# -Add subdirs for 'make dok-release'.
#
# Revision 1.70 2002/04/07 08:59:40 swa
# generated files. do NOT edit.
# fixed directory bug in makefile.
#
# Revision 1.69 2002/04/07 08:10:47 swa
# create some of the webserver docs
# automatically (in particular if
# those docs recycle other documentation
# fragments). Now committed webserver's
# index file.
#
# Revision 1.68 2002/04/07 07:58:11 swa
# create some of the webserver docs
# automatically (in particular if
# those docs recycle other documentation
# fragments)
#
# Revision 1.67 2002/04/07 05:31:42 hal9
# Add 'dok-release' target:
# -Set doc entities to VERSION and CODE_STATUS during make.
# -Set doc conditional content flags (stable vs non-stable).
# A separate target for the time being but needs to be incorporated into
# dok build at some point.
# -Filter out a spurious ^G from new man page > html converion in man2html.
#
# Revision 1.66 2002/04/06 20:28:21 jongfoster
# Prettifying groff2html.
# Using GNU Make's conditional makefile feature rather than shell "if"s.
# (The shell "if"s were hiding errors)
# "perl" -> "$(PERL)"
# Spaces->tabs in a couple of places.
#
# Revision 1.65 2002/04/06 05:16:39 hal9
# -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
# -Both of these will soon be generated files.
#
# Revision 1.64 2002/04/04 22:14:51 oes
# No longer rely on find honoring -iname
#
# Revision 1.63 2002/04/04 21:06:22 swa
# cosmetics.
#
# Revision 1.62 2002/04/04 20:49:50 swa
# attempt to consolidate the
# different dokbook versions.
#
# Revision 1.61 2002/04/04 19:18:21 swa
# readme was leftover directory. use w3m instead
# of lynx to be consistent among developers. use
# consistent target naming.
#
# Revision 1.60 2002/04/04 12:25:41 oes
# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
#
# Revision 1.59 2002/04/04 08:32:45 swa
# wrong name for tarball-dist target. further fixed content of tarball dist
#
# Revision 1.58 2002/04/04 06:32:58 hal9
# New dok targets for make readme.
#
# Revision 1.57 2002/04/04 00:36:36 gliptak
# always use pcre for matching
#
# Revision 1.56 2002/04/03 22:28:03 gliptak
# Removed references to gnu_regex
#
# Revision 1.55 2002/04/03 19:54:29 swa
# freebsd tested to work. attempt to move tarball dist target forward
#
# Revision 1.54 2002/04/03 14:54:07 oes
# Standard clean and clobber semantics II
#
# Revision 1.53 2002/04/03 14:19:16 oes
# Standard clean and clobber semantics
#
# Revision 1.52 2002/04/03 02:56:18 hal9
# Revert previous FAQ numbering kludge.
#
# Revision 1.51 2002/04/02 13:03:56 oes
# Added fix for webserver permissions
#
# Revision 1.50 2002/04/02 03:46:24 hal9
# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
# to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
#
# Revision 1.49 2002/03/30 22:20:12 swa
# cd didn't work. neither did find.
#
# Revision 1.48 2002/03/30 19:04:06 swa
# people release differently. no good.
# I want to make parts of the docs only.
#
# Revision 1.47 2002/03/30 09:05:21 swa
# better packaging. better rpm building.
# tar failed on sun (no exclude there).
#
# Revision 1.46 2002/03/29 20:09:01 swa
# al's patch
#
# Revision 1.45 2002/03/29 19:45:45 swa
# for lazy swa
#
# Revision 1.44 2002/03/29 17:42:44 gliptak
# Correcting for Solaris tar limitations
#
# Revision 1.43 2002/03/29 07:40:03 swa
# fixed make webserver. doh
#
# Revision 1.42 2002/03/29 06:59:04 swa
# other users could not modify files on webserver
#
# Revision 1.41 2002/03/28 20:43:00 swa
# set make correctly
#
# Revision 1.40 2002/03/28 04:22:44 hal9
# More on man2html stuff.
#
# Revision 1.39 2002/03/28 01:04:14 hal9
# More man2html stuff for docs.
#
# Revision 1.38 2002/03/27 16:02:30 swa
# have a generic target
#
# Revision 1.37 2002/03/27 15:30:26 swa
# have a consistent appearance
#
# Revision 1.36 2002/03/27 14:58:08 swa
# can be used by mutilple targets
#
# Revision 1.35 2002/03/27 14:53:19 swa
# added solaris-dist
#
# Revision 1.34 2002/03/27 10:30:11 swa
# we want a html man file on the webserver
#
# Revision 1.33 2002/03/27 03:05:35 hal9
# Added man2html target for docs (redhat-dok only for now)
#
# Revision 1.32 2002/03/26 22:29:54 swa
# we have a new homepage!
#
# Revision 1.31 2002/03/26 14:00:18 swa
# fixed make tarball, tarball-dist, tarball-clean
#
# Revision 1.30 2002/03/25 12:52:25 swa
# new targets
#
# Revision 1.29 2002/03/24 17:03:55 jongfoster
# Name change
#
# Revision 1.28 2002/03/24 16:19:48 swa
# configure needs to be generated.
#
# Revision 1.27 2002/03/24 16:13:57 swa
# generated files are a nono in cvs
#
# Revision 1.26 2002/03/24 15:36:02 swa
# did not build.
#
# Revision 1.25 2002/03/24 14:31:08 swa
# remove more crappy files. set RPM
# release version correctly.
#
# Revision 1.24 2002/03/24 14:19:55 swa
# set rpm package release in configure.in. nowhere else.
#
# Revision 1.23 2002/03/24 13:06:49 swa
# suse-clean now runs fine
#
# Revision 1.22 2002/03/24 12:56:21 swa
# name change related issues.
#
# Revision 1.21 2002/03/24 12:43:57 swa
# name change
#
# Revision 1.20 2002/03/24 11:39:17 jongfoster
# Renaming config files
#
# Revision 1.19 2002/03/22 20:53:03 morcego
# - Ongoing process to change name to JunkbusterNG
# - configure/configure.in: no change needed
# - GNUmakefile.in:
# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
# - PROGRAM = jbng
# - rh-spec now references as junkbusterng-rh.spec
# - redhat-upload: references changed to junkbusterng-* (package names)
# - tarball-dist: references changed to JunkbusterNG-distribution-*
# - tarball-src: now JunkbusterNG-*
# - install: initscript now junkbusterng.init and junkbusterng (when
# installed)
# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
# - junkbusterng.spec:
# - References to the expression ijb where changed where possible
# - New package name: junkbusterng (all in lower case, acording to
# the LSB recomendation)
# - Version changed to: 2.9.13
# - Release: 1
# - Added: junkbuster to obsoletes and conflicts (Not sure this is
# right. If it obsoletes, why conflict ? Have to check it later)
# - Summary changed: Stefan, please check and aprove it
# - Changes description to use the new name
# - Sed string was NOT changed. Have to wait to the manpage to
# change first
# - Keeping the user junkbuster for now. It will require some aditional
# changes on the script (scheduled for the next specfile release)
# - Added post entry to move the old logfile to the new log directory
# - Removing "chkconfig --add" entry (not good to have it automaticaly
# added to the startup list).
# - Added preun section to stop the service with the old name, as well
# as remove it from the startup list
# - Removed the chkconfig --del entry from the conditional block on
# the preun scriptlet (now handled on the %files section)
# - junkbuster.init: renamed to junkbusterng.init
# - junkbusterng.init:
# - Changed JB_BIN to jbng
# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
# be used where necessary (config dir)
#
# Aditional notes:
# - The config directory is /etc/junkbuster yet. Have to change it on the
# specfile, after it is changes on the code
# - The only files that got renamed on the cvs tree were the rh specfile and
# the init file. Some file references got changes on the makefile and on the
# rh-spec (as listed above)
#
# Revision 1.18 2002/03/21 23:00:00 swa
# want to autogenerate stuff.
#
# Revision 1.17 2002/03/19 19:30:04 morcego
# - Fixing stylesheet checking on configure. If it is found, no further checks
# should be done
#
# - configure will now check for db2html or docbook2html (should work now
# on SuSe without the docbktls package)
#
# Revision 1.16 2002/03/14 22:32:32 hal9
# Bumped the RPM version.
#
# Revision 1.15 2002/03/08 20:00:28 swa
# some leftovers.
#
# Revision 1.14 2002/03/07 18:25:56 swa
# synced redhat and suse build process
#
# Revision 1.13 2002/03/07 17:17:56 oes
# (Hopefully) fixed for older make versions
#
# Revision 1.12 2002/03/07 15:28:27 swa
# more informative
#
# Revision 1.11 2002/03/06 14:33:18 sarantis
# Use proper temp file, not "abc".
#
# Revision 1.10 2002/03/06 14:19:35 sarantis
# Cleanup PID_FILE_PATH from redhat-dist target
#
# Revision 1.9 2002/03/05 17:31:11 morcego
# Search for docbook.dsl. Should solve portability problems for SuSe.
#
# Revision 1.8 2002/03/05 14:07:42 morcego
# configure now detects rpm topdir, and change GNUmakefile acordingly
# (based on sugestion by Sarantis Paskalis)
#
# Revision 1.7 2002/03/05 13:43:28 morcego
# Checking for text browser, so redhat-dok can work.
#
# Revision 1.6 2002/03/05 13:10:51 morcego
# Changes to implement redhat-dok (Hal Burgiss)
# Changes to make it work on other distros and out-of-the-shelf configurations
#
# Revision 1.5 2002/02/27 15:30:39 hal9
# Reset $(RPM_PACKAGEV) to 1 (was 2)
#
# Revision 1.4 2002/01/17 21:44:04 jongfoster
# Adding urlmatch.[ch]
#
# Revision 1.3 2002/01/04 15:26:08 oes
# Added tarball-src target
#
# Revision 1.2 2001/12/30 14:07:31 steudten
# - Add signal handling (unix)
# - Add SIGHUP handler (unix)
# - Add creation of pidfile (unix)
# - Add action 'top' in rc file (RH)
# - Add entry 'SIGNALS' to manpage
# - Add exit message to logfile (unix)
#
# Revision 1.1 2001/12/01 11:22:57 jongfoster
# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
# make break in a more obvious way.
# Adding .PHONY section.
#
# Revision 1.40 2001/12/01 00:24:11 jongfoster
# Renaming various config files
# Fixing CR->CRLF under Win32 (I hope)
#
# Revision 1.39 2001/11/06 12:07:30 steudten
# Add --clean for building rpm in target redhat-dist.
#
# Revision 1.38 2001/11/05 21:35:23 steudten
# Complete rewrite for the 'redhat-dist' target.
# Checks for writeable RPM build directories for calling user.
# So you must not be root, just set the modes to 1777 to
# build a RH package.
# Fix the upload-target to be arch independant.
# Add target for 'solaris-dist' - coming soon.
#
# Revision 1.37 2001/11/01 00:52:04 hal9
# Redhat-upload stuff per Stefan.
#
# Revision 1.36 2001/10/31 19:26:13 swa
# automate process of uploading new releases
# to sf.
#
# Revision 1.35 2001/10/15 22:14:59 joergs
# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
# the general CFLAGS already.
#
# Revision 1.34 2001/10/15 18:28:06 steudten
# remove config.cache for target clobber.
# Cleanup make dist for RH and S.u.S.E.
#
# Revision 1.33 2001/10/10 12:43:33 oes
# Added ugly hack to make install target work at least for some setups.
#
# Revision 1.32 2001/10/09 22:38:19 jongfoster
# Correcting actionsfile filename for Win32 INI build
#
# Revision 1.31 2001/09/23 10:13:48 swa
# upload process established. run make webserver and
# the documentation is moved to the webserver. documents
# are now linked correctly.
#
# Revision 1.30 2001/09/19 17:55:49 oes
# Fixed CFLAGS
#
# Revision 1.29 2001/09/16 17:34:27 jongfoster
# Removing showargs.[ch], adding cgi(simple|edit).[ch]
# Replacing $(OBJEXT) with o - this seems to be a common source
# of build problems.
#
# Revision 1.28 2001/09/13 15:19:08 swa
# we want text files as well.
#
# Revision 1.27 2001/09/13 13:11:37 steudten
#
# Replace DEBUG_CFLAGS with OTHER_CFLAGS
#
# Revision 1.26 2001/09/12 23:44:54 david__schmidt
# Mac OSX (Darwin) support added.
#
# Revision 1.25 2001/09/12 22:55:45 joergs
# AmigaOS support added.
#
# Revision 1.24 2001/09/12 17:28:59 david__schmidt
#
# OS/2 port: update autoconf'd support for the platform.
#
# Revision 1.23 2001/09/12 16:28:42 swa
# added "make dok" section to generate html pages from
# the sgml source documents. note that the we do not want
# generated stuff in cvs.
#
# Revision 1.22 2001/09/10 16:31:23 swa
# buildroot definition in the specfile fucks up the build
# process under suse. hence I moved it to the "rpm -ta"
# command
#
# Revision 1.21 2001/09/10 11:12:49 oes
# Turning on -Wall
#
# Revision 1.20 2001/08/02 22:04:29 jongfoster
# Removing some remaining references to obsolete w32rulesdlg.[ch]
#
# Revision 1.19 2001/07/30 22:14:03 jongfoster
# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
#
# Revision 1.18 2001/07/29 17:09:17 jongfoster
# Major changes to build system in order to fix these bugs:
# - pthreads under Linux was broken - changed -lpthread to -pthread
# - Compiling in MinGW32 mode under CygWin now correctly detects
# which shared libraries are available
# - Solaris support (?) (Not tested under Solaris yet)
#
# Revision 1.17 2001/07/28 16:44:54 oes
# Fixed sed LF->CRLF conversion and removed deprecated files
#
# Revision 1.16 2001/07/15 19:45:33 jongfoster
# Added support for linking with POSIX threads library
#
# Revision 1.15 2001/07/13 13:48:07 oes
# - Moved STATIC #define for pcre to (ac)config.h
# - Made -Ipcre depandant on static pcre compilation to
# avoid version conflicts
# - Included compilation and depandancies for new deanimate.c
# - Made changes to the pcre/pcreposix/pcrs build process
# as required by the new library autodetection in
# configure.in
#
# Revision 1.14 2001/07/01 16:27:44 oes
# Fixed misplaced dependancy
#
# Revision 1.13 2001/06/29 13:18:36 oes
# - added depandancy of filters.o on cgi.h
#
# Revision 1.12 2001/06/12 17:15:56 swa
# fixes, because a clean build on rh6.1 was impossible.
# GZIP confuses make, %configure confuses rpm, etc.
#
# Revision 1.11 2001/06/11 11:26:35 sarantis
# RPM version should be the same as ijbswa version. The rpm release is
# specified in the specfile.
#
# Revision 1.10 2001/06/07 17:27:45 swa
# added suse build section
#
# Revision 1.9 2001/06/04 18:31:58 swa
# files are now prefixed with either `confdir' or `logdir'.
# `make redhat-dist' replaces both entries confdir and logdir
# with redhat values
#
# Revision 1.8 2001/06/04 10:44:57 swa
# `make redhatr-dist' now works. Except for the paths
# in the config file.
#
# Revision 1.7 2001/06/03 17:09:09 swa
# swa for oes: reversed my earlier change
#
# Revision 1.6 2001/06/03 17:07:27 swa
# swa for oes
#
# Revision 1.5 2001/06/03 13:57:26 swa
# compile cgi.c (for andreas' GUI)
#
# Revision 1.4 2001/05/31 21:18:45 jongfoster
# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
#
# Revision 1.3 2001/05/29 20:02:48 joergs
# Changes for AmigaOS added.
#
# Revision 1.2 2001/05/17 22:23:23 oes
# - Added auto-generation of CRLFs for Win32 config files
# - Added comment-prefix to all Win32-only options in the config file
# and provided auto stripping of this prefix for the Win32 platform by make
#
# Revision 1.1.1.1 2001/05/15 13:59:00 oes
# Initial import of version 2.9.3 source tree
#
#