tor-android/external/privoxy/INSTALL

174 lines
7.5 KiB
Plaintext
Raw Normal View History

/*********************************************************************
*
* File : $Source: /cvsroot/ijbswa/current/INSTALL,v $
*
* Purpose : INSTALL file to help with installing from source.
*
* Copyright : Written by and Copyright (C) 2001-2009 the
* Privoxy team. http://www.privoxy.org/
*
* Based on the Internet Junkbuster originally written
2012-06-28 03:42:39 +00:00
* by and Copyright (C) 1997 Anonymous Coders and
* Junkbusters Corporation. http://www.junkbusters.com
*
2012-06-28 03:42:39 +00:00
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General
* Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will
* be useful, but WITHOUT ANY WARRANTY; without even the
* implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* The GNU General Public License should be included with
* this file. If not, you can view it at
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
2012-06-28 03:42:39 +00:00
* or write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA
*
*********************************************************************/
-------------------------------------------------------------------------------
To build Privoxy from source, autoconf, GNU make (gmake), and, of course, a C
compiler like gcc are required.
When building from a source tarball, first unpack the source:
2012-06-28 03:42:39 +00:00
tar xzvf privoxy-3.0.12-stable-src.tar.gz
cd privoxy-3.0.12-stable
For retrieving the current CVS sources, you'll need a CVS client installed.
Note that sources from CVS are typically development quality, and may not be
stable, or well tested. To download CVS source, check the Sourceforge
documentation, which might give commands like:
cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login
cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co current
cd current
2012-06-28 03:42:39 +00:00
This will create a directory named current/, which will contain the source
tree.
You can also check out any Privoxy "branch", just exchange the current name
with the wanted branch name (Example: v_3_0_branch for the 3.0 cvs tree).
It is also strongly recommended to not run Privoxy as root. You should
configure/install/run Privoxy as an unprivileged user, preferably by creating a
"privoxy" user and group just for this purpose. See your local documentation
for the correct command line to do add new users and groups (something like
adduser, but the command syntax may vary from platform to platform).
/etc/passwd might then look like:
privoxy:*:7777:7777:privoxy proxy:/no/home:/no/shell
2012-06-28 03:42:39 +00:00
And then /etc/group, like:
privoxy:*:7777:
2012-06-28 03:42:39 +00:00
Some binary packages may do this for you.
Then, to build from either unpacked tarball or CVS source:
autoheader
autoconf
./configure # (--help to see options)
make # (the make from GNU, sometimes called gmake)
su # Possibly required
make -n install # (to see where all the files will go)
make -s install # (to really install, -s to silence output)
2012-06-28 03:42:39 +00:00
Using GNU make, you can have the first four steps automatically done for you by
just typing:
make
2012-06-28 03:42:39 +00:00
in the freshly downloaded or unpacked source directory.
To build an executable with security enhanced features so that users cannot
easily bypass the proxy (e.g. "Go There Anyway"), or alter their own
configurations, configure like this:
./configure --disable-toggle --disable-editor --disable-force
2012-06-28 03:42:39 +00:00
Then build as above. In Privoxy 3.0.7 and later, all of these options can also
be disabled through the configuration file.
WARNING: If installing as root, the install will fail unless a non-root user or
group is specified, or a privoxy user and group already exist on the system. If
a non-root user is specified, and no group, then the installation will try to
also use a group of the same name as "user". If a group is specified (and no
user), then the support files will be installed as writable by that group, and
owned by the user running the installation.
configure accepts --with-user and --with-group options for setting user and
group ownership of the configuration files (which need to be writable by the
daemon). The specified user must already exist. When starting Privoxy, it must
be run as this same user to insure write access to configuration and log files!
Alternately, you can specify user and group on the make command line, but be
sure both already exist:
make -s install USER=privoxy GROUP=privoxy
2012-06-28 03:42:39 +00:00
The default installation path for make install is /usr/local. This may of
course be customized with the various ./configure path options. If you are
doing an install to anywhere besides /usr/local, be sure to set the appropriate
paths with the correct configure options (./configure --help). Non-privileged
users must of course have write access permissions to wherever the target
installation is going.
If you do install to /usr/local, the install will use sysconfdir=$prefix/etc/
privoxy by default. All other destinations, and the direct usage of
--sysconfdir flag behave like normal, i.e. will not add the extra privoxy
directory. This is for a safer install, as there may already exist another
program that uses a file with the "config" name, and thus makes /usr/local/etc
cleaner.
If installing to /usr/local, the documentation will go by default to $prefix/
share/doc. But if this directory doesn't exist, it will then try $prefix/doc
and install there before creating a new $prefix/share/doc just for Privoxy.
Again, if the installs goes to /usr/local, the localstatedir (ie: var/) will
default to /var instead of $prefix/var so the logs will go to /var/log/privoxy
/, and the pid file will be created in /var/run/privoxy.pid.
make install will attempt to set the correct values in config (main
configuration file). You should check this to make sure all values are correct.
If appropriate, an init script will be installed, but it is up to the user to
determine how and where to start Privoxy. The init script should be checked for
correct paths and values, if anything other than a default install is done.
If install finds previous versions of local configuration files, most of these
will not be overwritten, and the new ones will be installed with a "new"
extension. default.action and default.filter will be overwritten. You will then
need to manually update the other installed configuration files as needed. The
default template files will be overwritten. If you have customized, local
templates, these should be stored safely in a separate directory and defined in
config by the "templdir" directive. It is of course wise to always back-up any
important configuration files "just in case". If a previous version of Privoxy
is already running, you will have to restart it manually.
For more detailed instructions on how to build Redhat RPMs, Windows
self-extracting installers, building on platforms with special requirements
etc, please consult the developer manual.
The simplest command line to start Privoxy is $path/privoxy --user=privoxy
$path/etc/privoxy/config. See privoxy --usage, or the man page, for other
options, and configuration.