2012-05-03 18:32:18 +00:00
# Note: Makefile is built automatically from Makefile.in
#
2012-06-28 03:42:39 +00:00
# $Id: GNUmakefile.in,v 1.180 2009/02/28 08:28:14 fabiankeil Exp $
2012-05-03 18:32:18 +00:00
#
2012-06-28 03:42:39 +00:00
# Written by and Copyright (C) 2001 - 2008 the SourceForge
2012-05-03 18:32:18 +00:00
# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
2012-06-28 03:42:39 +00:00
# by and Copyright (C) 1997 Anonymous Coders and
2012-05-03 18:32:18 +00:00
# Junkbusters Corporation. http://www.junkbusters.com
#
2012-06-28 03:42:39 +00:00
# This program is free software; you can redistribute it
2012-05-03 18:32:18 +00:00
# and/or modify it under the terms of the GNU General
# Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at
# your option) any later version.
#
# This program is distributed in the hope that it will
# be useful, but WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE. See the GNU General Public
# License for more details.
#
# The GNU General Public License should be included with
# this file. If not, you can view it at
# http://www.gnu.org/copyleft/gpl.html
# or write to the Free Software Foundation, Inc., 59
# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
#############################################################################
# Set make command correctly
#############################################################################
@ S E T _ M A K E @
#############################################################################
# Version number (for RPM)
#############################################################################
VERSION_MAJOR = @VERSION_MAJOR@
VERSION_MINOR = @VERSION_MINOR@
VERSION_POINT = @VERSION_POINT@
CODE_STATUS = @CODE_STATUS@
VERSION = $( VERSION_MAJOR) .$( VERSION_MINOR) .$( VERSION_POINT)
2012-06-28 03:42:39 +00:00
RPM_VERSION = $( VERSION)
RPM_PACKAGEV = ""
SNAPVERSION = $( RPM_VERSION) -$( shell date "+%Y%m%d" )
2012-05-03 18:32:18 +00:00
#############################################################################
# "make install" directories and variables
#############################################################################
#User Group paras
USER = @USER@
GROUP = @GROUP@
datarootdir = @datarootdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
CONF_BASE = @sysconfdir@
SBIN_DEST = @sbindir@
MAN_DIR = @mandir@
MAN_DEST = $( MAN_DIR) /man1
SHARE_DEST = @datadir@
DOC_DEST = $( SHARE_DEST) /doc/privoxy
VAR_DEST = @localstatedir@
LOGS_DEST = $( VAR_DEST) /log/privoxy
PIDS_DEST = $( VAR_DEST) /run
2012-06-28 03:42:39 +00:00
# if $prefix = /usr/local then the default CONFDEST change from
# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
2012-05-03 18:32:18 +00:00
# by the target rule CONF_DEST
#
# also if the $prefix is /usr/local and there is no
# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
# instead in this situation
#
2012-06-28 03:42:39 +00:00
# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
2012-05-03 18:32:18 +00:00
# changes this to /var for storing the logs and pidfile
# used in source dir only, the install goes to $share_dest/doc/privoxy
DOK_WEB = doc/webserver/
# Install usage should be compatible with install-sh.
INSTALL = @INSTALL@
# Binaries
BIN_MODE = 0755
# Support files, docs, etc.
RA_MODE = 0664
# Directory
DIR_MODE = 0755
# Files daemon writes to.
RWD_MODE = 0660
2012-06-28 03:42:39 +00:00
INSTALL_P = -m $( BIN_MODE)
2012-05-03 18:32:18 +00:00
INSTALL_T = -m $( RA_MODE)
INSTALL_D = -m $( DIR_MODE) -d
INSTALL_R = -m $( RWD_MODE)
# install options for superuser install
2012-06-28 03:42:39 +00:00
#INSTALL_S = -g @GROUP@ -o @USER@
2012-05-03 18:32:18 +00:00
#############################################################################
# Build tools
#############################################################################
PROGRAM = privoxy@EXEEXT@
CC = @CC@
ECHO = echo
GZIP_PROG = gzip
# id -u is not universal. FIXME: need to set from configure. Breaks on
# Solaris.
#ID = id -u
ID = id
LD = @CC@
RM = rm -f
CP = cp -f
RMDIR = rmdir
MKDIR = ./mkinstalldirs
STRIP_PROG = strip
SED = sed
GREP = grep
CAT = cat
2012-06-28 03:42:39 +00:00
RPM = rpm
RPMBUILD = rpmbuild
2012-05-03 18:32:18 +00:00
MV = mv
TAR = tar
LN = ln
TOUCH = touch
KILL = kill
CHMOD = chmod
CHOWN = chown
CHGRP = chgrp
GROUPS = groups
WDUMP = @WDUMP@ -dump
JADECAT = @JADECAT@
JADEBIN = @JADEBIN@
DB = $( JADEBIN) $( JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\# html
DB2HTML = @DB2HTML@
MAN2HTML = @MAN2HTML@
G2H_CMD = groff -mandoc -Thtml
TARGET_OS = @host@
PERL = perl
DOC_DIR = doc/source
DOC_TMP = $( DOC_DIR) /tmp
DOC_STATUS = @DOC_STATUS@
# Program to do LF->CRLF
#
# The sed version should be the most portable, but it doesn't for for me,
# the other two do. FIXME.
# - Jon
#DOSFILTER = $(SED) -e $$'s,$$,\r,'
#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
DOSFILTER = $( PERL) -p -e 's/\n/\r\n/'
CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
#############################################################################
2012-06-28 03:42:39 +00:00
# Setup for make distribution rh and suse for now
2012-05-03 18:32:18 +00:00
#############################################################################
2012-06-28 03:42:39 +00:00
TAR_ARCH = /tmp/privoxy-$( RPM_VERSION) .tar.gz
RPM_BASE = @RPM_BASE@
2012-05-03 18:32:18 +00:00
#############################################################################
# We include these files in our distributions
#############################################################################
CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
CONFIG_FILES = $( CONFIGS) \
` find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS" `
DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
` find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html" ` \
` find doc/webserver/ -name "*.css" ` \
2012-06-28 03:42:39 +00:00
privoxy.1
2012-05-03 18:32:18 +00:00
#############################################################################
# Filenames and libraries
#############################################################################
C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
errlog.c filters.c gateway.c jbsockets.c jcc.c \
list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
urlmatch.c
C_OBJS = $( C_SRC:.c= .@OBJEXT@)
C_HDRS = $( C_SRC:.c= .h) project.h actionlist.h
W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c
W32_FILES = @WIN_ONLY@w32.res
W32_OBJS = @WIN_ONLY@$( W32_SRC:.c= .@OBJEXT@) $( W32_FILES)
W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h
W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
W32_INIS = @WIN_ONLY@config.txt trust.txt
PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
PCRS_OBJS = @STATIC_PCRS_ONLY@$( PCRS_SRC:.c= .@OBJEXT@)
PCRS_HDRS = @STATIC_PCRS_ONLY@$( PCRS_SRC:.c= .h)
PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
PCRE_OBJS = @STATIC_PCRE_ONLY@$( PCRE_SRC:.c= .@OBJEXT@)
PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
# No REGEX (maybe because dynamically linked pcreposix):
REGEX_SRC =
@ S T A T I C _ P C R E _ O N L Y @ REGEX_SRC = pcre/pcreposix.c
REGEX_OBJS = $( REGEX_SRC:.c= .@OBJEXT@)
REGEX_HDRS = $( REGEX_SRC:.c= .h)
# Dependencies introduced by #include "project.h".
PROJECT_H_DEPS = project.h $( REGEX_HDRS) $( PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
# Socket libraries for platforms that need them explicitly defined
SOCKET_LIB = @SOCKET_LIB@
# PThreads library, if needed.
PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
SRCS = $( C_SRC) $( W32_SRC) $( PCRS_SRC) $( PCRE_SRC) $( REGEX_SRC)
OBJS = $( C_OBJS) $( W32_OBJS) $( PCRS_OBJS) $( PCRE_OBJS) $( REGEX_OBJS)
HDRS = $( C_HDRS) $( W32_HDRS) $( PCRS_HDRS) $( PCRE_OBJS) $( REGEX_HDRS)
LIBS = @LIBS@ $( W32_LIB) $( SOCKET_LIB) $( PTHREAD_LIB)
#############################################################################
# Compiler switches
#############################################################################
# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
# Win32 GUI build.
# The flag "-pthread" is required if using Pthreads under Linux (and
# possibly other OSs).
SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
2012-06-28 03:42:39 +00:00
# Add your flags here
OTHER_CFLAGS =
2012-05-03 18:32:18 +00:00
CFLAGS = @CFLAGS@ @CPPFLAGS@ $( OTHER_CFLAGS) $( SPECIAL_CFLAGS) -Wall \
2012-06-28 03:42:39 +00:00
@STATIC_PCRE_ONLY@ -Ipcre
2012-05-03 18:32:18 +00:00
LDFLAGS = @LDFLAGS@ $( DEBUG_CFLAGS) $( SPECIAL_CFLAGS)
#############################################################################
# Build section.
#
# There should NOT be any targets above this line.
#############################################################################
all : $( PROGRAM ) default .action
#############################################################################
# Phony targets
#############################################################################
2012-06-28 03:42:39 +00:00
.PHONY : all inifiles redhat -dist redhat -upload solaris -dist suse -dist \
s u s e - u p l o a d w i n - d i s t t a r b a l l - d i s t d o k r e d h a t - d o k w e b s e r v e r c l e a n c l o b b e r t a g s \
i n s t a l l c o n e c t i v a - s p e c c o n e c t i v a - d i s t c o n e c t i v a - u p l o a d C O N F _ D E S T L O G _ D E S T \
2012-05-03 18:32:18 +00:00
P I D _ D E S T c h e c k _ d o c i n s t a l l - s t r i p u n i n s t a l l G R O U P _ T
#############################################################################
# Define this explicitly because Solaris is broken!
#############################################################################
%.o : %.c
$( CC) -c $( CFLAGS) $( CPPFLAGS) $< -o $@
#############################################################################
# Strip master copy comments from default.action:
#############################################################################
default.action : default .action .master
2012-06-28 03:42:39 +00:00
$( GREP) -v '^#MASTER#' $< > $@
2012-05-03 18:32:18 +00:00
#############################################################################
# Win32 config files
#############################################################################
inifiles : $( W 32_INIS )
config.txt : config
$( SED) -e 's!\trustfile trust!trustfile trust.txt!' \
-e 's!\logfile logfile!logfile privoxy.log!' \
-e 's!#Win32-only: !!' \
< $< | \
$( DOSFILTER) > $@
# LF to CRLF in default.action
$( DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
# LF to CRLF in default.filter
$( DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
trust.txt : trust
2012-06-28 03:42:39 +00:00
$( DOSFILTER) < $< > $@
2012-05-03 18:32:18 +00:00
#############################################################################
# Pre-dist check:
#############################################################################
dist-check :
@if [ -d CVS ] ; then \
$( ECHO) "***************************************************" ; \
$( ECHO) "*** ***" ; \
$( ECHO) "*** WARNING ***" ; \
$( ECHO) "*** ***" ; \
$( ECHO) "*** The presence of a CVS subdirectory suggests ***" ; \
$( ECHO) "*** that you are trying to build a distribution ***" ; \
$( ECHO) "*** package based on a checked out, not an ***" ; \
$( ECHO) "*** exported copy of the source tree. Please ***" ; \
$( ECHO) "*** see \"Releasing a new version\" in the ***" ; \
$( ECHO) "*** developer manual. ***" ; \
$( ECHO) "*** ***" ; \
$( ECHO) "***************************************************" ; \
$( ECHO) "Type \"yes i am sure\" if you are sure that you" ; \
$( ECHO) -n "really want to proceed: " ; \
read answer; \
if [ " $$ answer " != "yes i am sure" ] ; then exit 1; fi \
fi ;
#############################################################################
# create tar.gz from CVS:
2012-06-28 03:42:39 +00:00
# This make-target is usually called through 'create-archive'. If you
2012-05-03 18:32:18 +00:00
# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
2012-06-28 03:42:39 +00:00
# tar.gz with the current date in the name and as a releasenumber in the
2012-05-03 18:32:18 +00:00
# spec-file. But the main usage is to run it as follows (Red Hat example):
# make SNAPVERSION=1.6x create-snapshot
2012-06-28 03:42:39 +00:00
# This creates a tar.gz and spec-file for a Red Hat 6.x version.
2012-05-03 18:32:18 +00:00
#############################################################################
create-snapshot :
@tag= ` cvs -d $( CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } ' ` 2> /dev/null; \
[ x" $$ tag " = x"(none)" ] && tag = HEAD; \
echo " *** Creating package from $$ tag! " ; \
TMPDIR = $( shell mktemp -d /tmp/$( PROGRAM) .XXXXXX) ; \
cd $$ TMPDIR ; cvs -Q -d $( CVSROOT) export -r $$ tag current || echo "Um... export aborted." ; \
cd $$ TMPDIR/current; \
2012-06-28 03:42:39 +00:00
TMPFILE = $$ ( mktemp -q /tmp/$( PROGRAM) .XXXXXX) ; \
if $( SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
privoxy-rh.spec > $$ TMPFILE ; then \
$( MV) -f $$ TMPFILE privoxy-rh.spec; \
else \
$( ECHO) "Could not set version info in specfile." ; \
exit 1; \
fi ; \
if $( SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
privoxy-suse.spec > $$ TMPFILE ; then \
$( MV) -f $$ TMPFILE privoxy-suse.spec; \
else \
$( ECHO) "Could not set version info in specfile." ; \
exit 1; \
fi ; \
$( RM) $$ TMPFILE; \
cd $$ TMPDIR/current; \
2012-05-03 18:32:18 +00:00
$( TAR) --exclude ".cvsignore" --exclude "CVS" \
-czf /tmp/$( PROGRAM) -$( VERSION) .tar.gz .; \
$( RM) -rf $$ TMPDIR
@echo " Resulting file is /tmp/ $( PROGRAM) - $( VERSION) .tar.gz "
#############################################################################
# looks at the version of Makefile and exports a corresponding source-tree
2012-06-28 03:42:39 +00:00
# example: if the Makefile has the sticky tag v_2_9_13, you'll get
# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
# Red Hat and one for SuSe (different spec-files)
2012-05-03 18:32:18 +00:00
#############################################################################
create-archive :
make SNAPVERSION = $( SNAPVERSION) create-snapshot
2012-06-28 03:42:39 +00:00
#############################################################################
# RPM specifice stuff (SuSE or Redhat, ..)
#############################################################################
rpm-stuff : dist -check clean clobber
for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
if [ ! -w $( RPM_BASE) /$$ dir ] ; then \
$( ECHO) " $( RPM_BASE) / $$ dir is not writable for you. Maybe try as root. " ; \
$( ECHO) "Or add a suitable path to .rpmmacros like." ; \
$( ECHO) "%_topdir /home/foo/rpm-build" ; \
exit 1; \
fi ; \
done ; \
check-release :
@if [ " $( RPM_PACKAGEV) " = "" ] ; then \
echo ; \
echo " ERROR: NO RPM_PACKAGEV VALUE" ; \
echo " No value given for RPM_PACKAGEV. Please use:" ; \
echo " make dist-upload RPM_PACKAGEV=release" ; \
echo " where \"release\" is the release number you want to and" ; \
echo " where \"dist\" is the name of the distro (redhat or suse)" ; \
echo ; \
echo " Ex: make redhat-upload RPM_PACKAGEV=1" ; \
echo "" ; \
echo "ATTENTION: If your distribution use a specific tag on the" ; \
echo " release field (like \"cl\" for Conectiva, and" ; \
echo " \"mdk\" for Mandrake), DO NOT put it on the value" ; \
echo " given to RPM_PACKAGEV. It will be added automaticaly." ; \
echo " Do it like you would do for a redhat package," ; \
echo " (i.e. just the number)." ; \
echo ; \
exit 1; \
fi
#############################################################################
# Create Conectiva specfile from RedHat specfile
#############################################################################
conectiva-spec :
$( RM) privoxy-cl.spec
chmod a+x genclspec.sh
./genclspec.sh
#############################################################################
# Conectiva distribution for x86
#############################################################################
conectiva-dist : rpm -stuff conectiva -spec
$( TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $( TAR_ARCH) .
$( RPMBUILD) --clean -ta $( TAR_ARCH)
if [ -f $( TAR_ARCH) ] ; then $( RM) $( TAR_ARCH) ; fi
conectiva-upload : check -release
make redhat-upload RPM_PACKAGEV = $( RPM_PACKAGEV) cl
#############################################################################
# redhat distribution alpha and x86
#############################################################################
redhat-dist : rpm -stuff
echo $( CONFIG_FILES)
$( TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $( TAR_ARCH) .
$( RPMBUILD) --clean -ta $( TAR_ARCH)
if [ -f $( TAR_ARCH) ] ; then $( RM) $( TAR_ARCH) ; fi
# For testing build issues only! Use redhat-dist for official releases.
redhat-test :
echo $( CONFIG_FILES)
$( TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $( TAR_ARCH) .
$( RPMBUILD) --clean -tb $( TAR_ARCH)
if [ -f $( TAR_ARCH) ] ; then $( RM) $( TAR_ARCH) ; fi
@echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
# anonymously ncftps the rpms to sourceforge
redhat-upload : check -release
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $( RPM_BASE) /SRPMS/privoxy-$( RPM_VERSION) -$( RPM_PACKAGEV) .src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $( RPM_BASE) /RPMS/*/privoxy-$( RPM_VERSION) -$( RPM_PACKAGEV) .*.rpm
@$( ECHO) -------------------------------------------------------
@$( ECHO) Now goto
@$( ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id= 11118
@$( ECHO) ... and release the files.
@$( ECHO) -------------------------------------------------------
# w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
#############################################################################
# Creates a Red Hat sourcepackage from CVS (not from the current sources
# on disk)
#############################################################################
redhat-srpm :
make create-archive
$( RPMBUILD) -ts --nodeps $( PROGRAM) -$( VERSION) .tar.gz
#############################################################################
# suse distribution. works fine. no need to be root.
#############################################################################
suse-dist : rpm -stuff
# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
# privoxy-suse.spec > $$TMPFILE ; then \
# $(MV) -f $$TMPFILE privoxy-suse.spec; \
# else \
# $(ECHO) "Could not set version info in specfile."; \
# exit 1;\
# fi
$( TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $( TAR_ARCH) .
$( RPMBUILD) --clean -ta $( TAR_ARCH)
if [ -f $( TAR_ARCH) ] ; then $( RM) $( TAR_ARCH) ; fi
# anonymously ncftps the rpms to sourceforge
suse-upload : check -release
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $( RPM_BASE) /SRPMS/privoxy-suse-$( RPM_VERSION) -$( RPM_PACKAGEV) .src.rpm
# better should use `arch` here instead of ix86 to support other platforms too
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $( RPM_BASE) /RPMS/*/privoxy-suse-$( RPM_VERSION) -$( RPM_PACKAGEV) .*.rpm
@$( ECHO) -------------------------------------------------------
@$( ECHO) Now goto
@$( ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id= 11118
@$( ECHO) ... and release the files.
@$( ECHO) -------------------------------------------------------
# handle with care. use with root.
suse-clean :
$( RPM) -e junkbuster-suse || true
$( RM) -r /etc/junkbuster
$( RM) -r /etc/rc.d/junkbuster*
$( RM) -r /var/run/junkbuster.pid
$( RM) -r /var/log/junkbuster
$( RM) /etc/init.d/junkbuster
$( RM) /usr/sbin/junkbuster
$( RM) /usr/sbin/rcjunkbuster
$( RM) /usr/share/man/man1/junkbuster.1.gz
$( RPM) -e privoxy-suse || true
$( RM) -r /etc/privoxy
$( RM) -r /etc/rc.d/privoxy*
$( RM) -r /var/run/privoxy.pid
$( RM) -r /var/log/privoxy
$( RM) /etc/init.d/privoxy
$( RM) /usr/sbin/privoxy
$( RM) /usr/sbin/rcprivoxy
$( RM) /usr/share/man/man1/privoxy.1.gz
2012-05-03 18:32:18 +00:00
#############################################################################
# generic distribution
#############################################################################
gen-dist : dist -check
@$( ECHO) ""
@$( ECHO) "You have run autoconf && autoheader && ./configure right?"
@$( ECHO) ""
$( MAKE) $( PROGRAM)
$( STRIP_PROG) $( PROGRAM)
$( LN) -s current ../privoxy-$( VERSION) -$( CODE_STATUS)
# add program
( cd .. && $( TAR) -cvhf --exclude "PACKAGERS" privoxy-$( TARGET_OS) -$( VERSION) -$( CODE_STATUS) -src.tar privoxy-$( VERSION) -$( CODE_STATUS) /$( PROGRAM) )
# add config files
for foo in $( CONFIG_FILES) ; do \
( cd .. && $( TAR) -uvhf --exclude "PACKAGERS" privoxy-$( TARGET_OS) -$( VERSION) -$( CODE_STATUS) -src.tar privoxy-$( VERSION) -$( CODE_STATUS) /$$ foo; ) \
2012-06-28 03:42:39 +00:00
done ;
2012-05-03 18:32:18 +00:00
# add documentation
for foo in $( DOC_FILES) ; do \
( cd .. && $( TAR) -uvhf --exclude "PACKAGERS" privoxy-$( TARGET_OS) -$( VERSION) -$( CODE_STATUS) -src.tar privoxy-$( VERSION) -$( CODE_STATUS) /$$ foo; ) \
done ;
# and zip the archive
$( RM) ../privoxy-$( VERSION) -$( CODE_STATUS)
$( GZIP_PROG) ../privoxy-$( TARGET_OS) -$( VERSION) -$( CODE_STATUS) -src.tar
@$( ECHO) Distribution with binary created.
# anonymously ncftps the package to sourceforge
gen-upload :
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$( TARGET_OS) -$( VERSION) -$( CODE_STATUS) -src.tar.gz
@$( ECHO) -------------------------------------------------------
@$( ECHO) Now goto
@$( ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id= 11118
@$( ECHO) ... and release the files.
@$( ECHO) -------------------------------------------------------
# use with care
gen-clean :
$( RM) privoxy-$( TARGET_OS) -$( VERSION) -$( CODE_STATUS) -src.tar*
2012-06-28 03:42:39 +00:00
#############################################################################
# solaris distribution. verified on SF machines by swa.
#############################################################################
solaris-dist : gen -dist
@$( ECHO) Done.
# anonymously ncftps the package to sourceforge
solaris-upload : gen -upload
@$( ECHO) Done.
# use with care
solaris-clean : gen -clean
@$( ECHO) Done.
#############################################################################
# hpux distribution
#############################################################################
hpux-dist :
@$( ECHO) coming soon.
hpux-upload :
@$( ECHO) coming soon.
#############################################################################
# debian distribution
#############################################################################
debian-dist :
@$( ECHO) coming soon.
debian-upload :
@$( ECHO) coming soon.
#############################################################################
# macosx distribution
#############################################################################
macosx-dist :
@$( ECHO) coming soon.
macosx-upload :
@$( ECHO) coming soon.
#############################################################################
# amiga distribution
#############################################################################
amiga-dist :
@$( ECHO) coming soon.
amiga-upload :
@$( ECHO) coming soon.
#############################################################################
# freebsd distribution. verified on SF machines by swa.
#############################################################################
freebsd-dist : gen -dist
@$( ECHO) Done.
# anonymously ncftps the package to sourceforge
freebsd-upload : gen -upload
@$( ECHO) Done.
# use with care
freebsd-clean : gen -clean
@$( ECHO) Done.
#############################################################################
# Windows distribution
#############################################################################
win-dist :
$( ECHO) Not implemented.
2012-05-03 18:32:18 +00:00
#############################################################################
# Tarball distribution: No CVS dirs, dotfiles, debian build dir,
# (FIXME:) only parts of the static / generated docs mix in doc/webserver
#############################################################################
tarball-dist : dist -check clean clobber
$( LN) -s current ../privoxy-$( VERSION) -$( CODE_STATUS)
for i in ` find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
-o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
-name "PACKAGERS" \) ` ; do \
files = " $$ files privoxy- $( VERSION) - $( CODE_STATUS) / $$ i " ; \
done && \
cd .. && $( TAR) -cvhf privoxy-$( VERSION) -$( CODE_STATUS) -src.tar $$ files ; \
# and zip the archive
2012-06-28 03:42:39 +00:00
$( RM) ../privoxy-$( VERSION) -$( CODE_STATUS)
2012-05-03 18:32:18 +00:00
$( GZIP_PROG) ../privoxy-$( VERSION) -$( CODE_STATUS) -src.tar
@$( ECHO) Tarball distribution created.
# anonymously ncftps the tarball to sourceforge
tarball-upload :
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$( VERSION) -$( CODE_STATUS) -src.tar.gz
@$( ECHO) -------------------------------------------------------
@$( ECHO) Now goto
@$( ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id= 11118
@$( ECHO) ... and release the files.
@$( ECHO) -------------------------------------------------------
tarball-clean :
$( RM) ../privoxy-$( VERSION) -$( CODE_STATUS) -src.tar.gz
#############################################################################
#
# Documentation
#
# converts doc/source/*.sgml into html and man pages
#
#############################################################################
# developer manual
2012-06-28 03:42:39 +00:00
dok-devel :
2012-05-03 18:32:18 +00:00
$( RM) doc/webserver/developer-manual/*.html
$( RM) -r doc/source/developer-manual
mkdir -p doc/source/developer-manual
cd doc/source/developer-manual && $( DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
# user manual
2012-06-28 03:42:39 +00:00
dok-user :
2012-05-03 18:32:18 +00:00
$( RM) doc/webserver/user-manual/*.html
$( RM) -r doc/source/user-manual/
mkdir -p doc/source/user-manual
cd doc/source/user-manual && $( DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
# FIXME: temp fix so same stylesheet gets in more than one place so it works
# for all doc set-ups, including the 'user manual' config option in local
# system where it MUST be in same directory as html.
$( PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
# faq
2012-06-28 03:42:39 +00:00
dok-faq :
2012-05-03 18:32:18 +00:00
$( RM) doc/webserver/faq/*.html
$( RM) -r doc/source/faq
mkdir -p doc/source/faq
cd doc/source/faq && $( DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
2012-06-28 03:42:39 +00:00
# man page, one variation. Try to use the next target, just 'make man'.
dok-man :
2012-05-03 18:32:18 +00:00
$( RM) doc/man/* doc/webserver/man-page/*.html
2012-06-28 03:42:39 +00:00
i f n e q ( $( MAN 2HTML ) , f a l s e )
$( ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
man ./privoxy.1 | $( MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
$( ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
e l s e
$( MAKE) groff2html
e n d i f
2012-05-03 18:32:18 +00:00
# Build man page from sgml. This requires the SGMLSpm perl module.
2012-06-28 03:42:39 +00:00
# See CPAN, or your favorite perl repository. This is the preferred
2012-05-03 18:32:18 +00:00
# target for man page generation!
man : dok -release
mkdir -p doc/source/temp && cd doc/source/temp && $( RM) * ; \
nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl && \
2012-06-28 03:42:39 +00:00
perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ; \
perl -pi.bak -e "s/\[ /\[/g;s/<2F> /\\\\['a]/g;s/<2F> /\\\\['e]/g" privoxy.1; \
perl -pi.bak -e "s/<2F> /\\\\[:o]/g" privoxy.1; \
perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
$( DB) ../privoxy-man-page.sgml && $( MV) -f privoxy.1 ../../../privoxy.1
2012-05-03 18:32:18 +00:00
# For those with man2html ala RH7s.
man2html :
mkdir -p doc/webserver/man-page
2012-06-28 03:42:39 +00:00
i f n e q ( $( MAN 2HTML ) , f a l s e )
$( MAN2HTML) privoxy.1 | grep -v "^Content-type" > tmp.html
$( PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
$( PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
# Twice because my version of man2html is pulling in commas and periods in URLs.
$( PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
$( PERL) -pi.bak -e 's,\.">,">,g' tmp.html
$( PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html
# Get rid of spurious
$( SED) -e 's/ tmp.html > doc/webserver/man-page/privoxy-man-page.html && $( RM) tmp.*
e l s e
$( MAKE) groff2html
e n d i f
2012-05-03 18:32:18 +00:00
# Otherwise we get plain groff conversion.
groff2html :
2012-06-28 03:42:39 +00:00
$( G2H_CMD) ./privoxy.1 | $( SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
2012-05-03 18:32:18 +00:00
# readme page and INSTALL file
dok-readme : dok -release
cd doc/source && $( DB) -notoc -V nochunks readme.sgml > tmp.html && \
env -u LANG $( WDUMP) tmp.html > ../../README ; \
$( DB) -notoc -V nochunks install.sgml > tmp.html && \
env -u LANG $( WDUMP) tmp.html > ../../INSTALL ; \
$( RM) tmp.*
# index.sgml is used to create both the Home Page, and a local index
# for documentation, etc.
#
# index.html for webserver:
2012-06-28 03:42:39 +00:00
dok-webserver :
2012-05-03 18:32:18 +00:00
cd doc/source/webserver && $( DB) -notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
$( PERL) -pi.bak -e ' s/..\/ p_doc.css/p_doc.css/; \
s/<\/ HEAD/\n <meta name = \" description\" content = \" Privoxy helps users to protect their privacy.\" ><\/ HEAD/; \
s/<\/ HEAD/\n <meta name = "MSSmartTagsPreventParsing" content = "TRUE" ><\/ HEAD/; \
s/\. \d \. //; \
s/__copy/& copy; /' \
doc/webserver/index.html && $( RM) doc/webserver/*.bak
# privoxy-index.html for local documentation:
2012-06-28 03:42:39 +00:00
dok-index :
2012-05-03 18:32:18 +00:00
cd doc/source/webserver && $( DB) -notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
$( PERL) -pi.bak -e ' s/..\/ p_doc.css/p_doc.css/; \
s/<\/ HEAD/\n <meta name = \" description\" content = \" Privoxy helps users to protect their privacy.\" ><\/ HEAD/; \
s/<\/ HEAD/\n <meta name = "MSSmartTagsPreventParsing" content = "TRUE" ><\/ HEAD/; \
s/\. \d \. //; \
s/__copy/& copy; /' \
doc/webserver/privoxy-index.html && $( RM) doc/webserver/*.bak
# Main documentation target.
dok : dok -release dok -devel dok -user dok -faq dok -readme dok -webserver dok -authors dok -index
@$( ECHO) Documentation created.
2012-06-28 03:42:39 +00:00
#
# an alternative to the above dok. disabled man page creation for the moment
#
redhat-dok : dok -release dok -devel dok -user dok -faq redhat -readme dok -webserver dok -authors
@$( ECHO) Documentation created.
## Make README
redhat-readme :
cd doc/source && $( DB) -notoc -V nochunks readme.sgml > tmp.html && $( WDUMP) \
tmp.html > ../../README && $( RM) -r tmp.html
2012-05-03 18:32:18 +00:00
## Make AUTHORS file
2012-06-28 03:42:39 +00:00
dok-authors :
2012-05-03 18:32:18 +00:00
cd doc/source && $( DB) -V nochunks authors.sgml > tmp.html && env -u LANG $( WDUMP) \
tmp.html > ../../AUTHORS && $( RM) tmp.html
# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
# exceptions accordingly. This needs to go before any doc building (doh).
dok-release :
@$( ECHO) Setting doc version and status to $( VERSION) , $( CODE_STATUS)
@$( PERL) -pi.bak -e ' s/<!entity +p-version.*>/<!entity p-version " $( VERSION) " >/; \
s/<!entity +p-status.*>/<!entity p-status " $( CODE_STATUS) " >/' \
doc/source/*sgml doc/source/*/*sgml
$( RM) -r doc/source/*bak doc/source/*/*bak
2012-06-28 03:42:39 +00:00
i f e q ( $( CODE_STATUS ) , s t a b l e )
@$( ECHO) Setting docs to stable $( VERSION)
@$( PERL) -pi.bak -e ' s/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE" >/; \
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE" >/' \
doc/source/*sgml doc/source/*/*sgml
$( RM) -r doc/source/*bak doc/source/*/*bak
e l s e
@$( ECHO) Setting docs to not stable $( VERSION)
@$( PERL) -pi.bak -e ' s/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE" >/; \
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE" >/' \
doc/source/*sgml doc/source/*/*sgml
$( RM) -r doc/source/*bak doc/source/*/*bak
e n d i f
2012-05-03 18:32:18 +00:00
# Create release announcement in text and html, with short and long versions.
# This is a standalone target, and must be invoked directly.
# announce: dok-release
# mkdir -p $(DOC_TMP)
# cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
# cd $(DOC_TMP) && $(DB) announce.sgml &&\
# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
2012-06-28 03:42:39 +00:00
# mv -f *html *txt ../../..
2012-05-03 18:32:18 +00:00
# rm -fr $(DOC_TMP)
2012-06-28 03:42:39 +00:00
# The main Privoxy config file, generated from sgml sources.
# NOTE: This will require some hand editing. The new file is outputted
2012-05-03 18:32:18 +00:00
# as config.new so that problem sections can be compared to previous
2012-06-28 03:42:39 +00:00
# version. This is hardcored to w3m for html/text conversion. Also,
2012-05-03 18:32:18 +00:00
# requires the shell util 'fmt'.
config-file : dok -release
cd doc/source && $( DB) -notoc -iconfig-file -V nochunks config.sgml > __tmp.html && \
env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $( RM) -r __tmp.*
$( PERL) -i.bak utils/prepare-configfile.pl config.new
$( RM) *.bak
@$( ECHO) "****************************************************"
@$( ECHO) "The output file is config.new."
@$( ECHO) "Now -- you need to hand edit the results!!!"
@$( ECHO) "In particular, check the Debug levels, the"
@$( ECHO) "permit-access, forward & socks examples and the"
@$( ECHO) "various user-manual examples, which all"
@$( ECHO) "probably got hammered."
@$( ECHO) "****************************************************"
# config file, alternate version using lynx (perl stuff unfinished). Lynx
# does not do so good a job.
2012-06-28 03:42:39 +00:00
config-file-alt :
2012-05-03 18:32:18 +00:00
cd doc/source && $( ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg && \
$( DB) -notoc -iconfig-file -V nochunks config.sgml > __tmp.html && \
lynx -cfg= __tmp.lynx_cfg -width= 78 -dump __tmp.html > ../../config.new && $( RM) -r __tmp.*
$( PERL) -pi -e ' s/^( ) //; \
s/:$\/ :\n /' config.new
#############################################################################
#
# Webserver
#
# moves dokumentation to webserver
#
#############################################################################
2012-06-28 03:42:39 +00:00
webserver : tidy
2012-05-03 18:32:18 +00:00
@$( ECHO) -------------------------------------------------------
@$( ECHO) You will need to "create" a SF shell first:
2012-06-28 03:42:39 +00:00
@$( ECHO) ssh -t USER,PROJECT@shell.sourceforge.net create
2012-05-03 18:32:18 +00:00
@$( ECHO) Please make sure your documentation files are up to date.
2012-06-28 03:42:39 +00:00
@$( ECHO) Note that this command updates the home page and scps
2012-05-03 18:32:18 +00:00
@$( ECHO) all stuff to the webserver, it will not remove obsolete documents.
2012-06-28 03:42:39 +00:00
@$( ECHO) You will also need to change the user-manual symlink manually.
2012-05-03 18:32:18 +00:00
@$( ECHO) -------------------------------------------------------
@$( ECHO) Uploading html
@cd doc/webserver; \
upload = ` find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \) ` ; \
2012-06-28 03:42:39 +00:00
$( TAR) c $$ upload | ssh shell.sf.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
2012-05-03 18:32:18 +00:00
@$( ECHO) Fixing permissions
2012-06-28 03:42:39 +00:00
@ssh shell.sf.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
@ssh shell.sf.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
@ssh shell.sf.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
2012-05-03 18:32:18 +00:00
2012-06-28 03:42:39 +00:00
web-actions : tidy
@$( ECHO) Uploading
2012-05-03 18:32:18 +00:00
@cd doc/webserver/actions; \
upload = ` find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \) ` ; \
2012-06-28 03:42:39 +00:00
$( TAR) c $$ upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
2012-05-03 18:32:18 +00:00
@$( ECHO) Fixing permissions
2012-06-28 03:42:39 +00:00
@ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
@ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
2012-05-03 18:32:18 +00:00
2012-06-28 03:42:39 +00:00
##
2012-05-03 18:32:18 +00:00
dok-put :
tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
--exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt" \
doc/* INSTALL LICENSE AUTHORS README \
-czf $( DOC_FILE) ; \
$( ECHO) "Uploading doc package ..." ; \
2012-06-28 03:42:39 +00:00
scp $( DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
@ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
2012-05-03 18:32:18 +00:00
$( RM) $( DOC_FILE)
dok-get :
cd /tmp ; \
$( WGET) http://www.privoxy.org/docs/$( DOC_FILE) ; \
$( TAR) -zxvf $( DOC_FILE)
#############################################################################
# Source file dependencies
#############################################################################
actions.@OBJEXT@ : actions .c actions .h config .h $( PROJECT_H_DEPS ) errlog .h jcc .h list .h loaders .h miscutil .h actionlist .h ssplit .h
cgi.@OBJEXT@ : cgi .c cgi .h config .h $( PROJECT_H_DEPS ) cgiedit .h cgisimple .h jbsockets .h list .h pcrs .h encode .h ssplit .h jcc .h filters .h actions .h errlog .h miscutil .h
cgiedit.@OBJEXT@ : cgiedit .c cgiedit .h config .h $( PROJECT_H_DEPS ) cgi .h list .h pcrs .h encode .h ssplit .h jcc .h filters .h actionlist .h actions .h errlog .h miscutil .h
cgisimple.@OBJEXT@ : cgisimple .c cgisimple .h config .h $( PROJECT_H_DEPS ) cgi .h list .h pcrs .h encode .h ssplit .h jcc .h filters .h actions .h errlog .h miscutil .h urlmatch .h
deanimate.@OBJEXT@ : deanimate .c deanimate .h config .h $( PROJECT_H_DEPS )
encode.@OBJEXT@ : encode .c encode .h config .h
errlog.@OBJEXT@ : errlog .c errlog .h config .h $( PROJECT_H_DEPS ) @WIN_ONLY @w 32log .h
2012-06-28 03:42:39 +00:00
filters.@OBJEXT@ : filters .c filters .h config .h $( PROJECT_H_DEPS ) errlog .h encode .h gateway .h jbsockets .h jcc .h loadcfg .h parsers .h ssplit .h cgi .h deanimate .h urlmatch .h @WIN_ONLY @win 32.h
2012-05-03 18:32:18 +00:00
gateway.@OBJEXT@ : gateway .c gateway .h config .h $( PROJECT_H_DEPS ) errlog .h jbsockets .h jcc .h loadcfg .h
jbsockets.@OBJEXT@ : jbsockets .c jbsockets .h config .h $( PROJECT_H_DEPS ) filters .h
jcc.@OBJEXT@ : jcc .c jcc .h config .h $( PROJECT_H_DEPS ) errlog .h filters .h gateway .h jbsockets .h loadcfg .h loaders .h miscutil .h parsers .h @WIN_ONLY @w 32log .h win 32.h w 32svrapi .h cgi .h
list.@OBJEXT@ : list .c list .h config .h $( PROJECT_H_DEPS ) list .h miscutil .h
loadcfg.@OBJEXT@ : loadcfg .c loadcfg .h config .h $( PROJECT_H_DEPS ) errlog .h filters .h gateway .h jbsockets .h jcc .h loaders .h miscutil .h parsers .h @WIN_ONLY @w 32log .h win 32.h
loaders.@OBJEXT@ : loaders .c loaders .h config .h $( PROJECT_H_DEPS ) errlog .h encode .h filters .h gateway .h jcc .h loadcfg .h miscutil .h parsers .h ssplit .h
miscutil.@OBJEXT@ : miscutil .c miscutil .h config .h
parsers.@OBJEXT@ : parsers .c parsers .h config .h $( PROJECT_H_DEPS ) errlog .h filters .h jbsockets .h jcc .h loadcfg .h loaders .h miscutil .h ssplit .h
ssplit.@OBJEXT@ : ssplit .c ssplit .h config .h miscutil .h
urlmatch.@OBJEXT@ : urlmatch .c urlmatch .h config .h $( PROJECT_H_DEPS ) errlog .h miscutil .h ssplit .h
# GNU regex
gnu_regex.@OBJEXT@ : gnu_regex .c gnu_regex .h config .h
# PCRS
2012-06-28 03:42:39 +00:00
pcrs.@OBJEXT@ : pcrs .c pcrs .h config .h @STATIC_PCRE_ONLY @pcre /pcre .h
2012-05-03 18:32:18 +00:00
# PCRE
pcre/get.@OBJEXT@ : pcre /get .c pcre /config .h pcre /internal .h pcre /pcre .h
pcre/maketables.@OBJEXT@ : pcre /maketables .c pcre /config .h pcre /internal .h pcre /pcre .h
2012-06-28 03:42:39 +00:00
pcre/pcre.@OBJEXT@ : pcre /pcre .c pcre /config .h pcre /internal .h pcre /pcre .h pcre /chartables .c
2012-05-03 18:32:18 +00:00
pcre/pcreposix.@OBJEXT@ : pcre /pcreposix .c pcre /config .h pcre /internal .h pcre /pcre .h pcre /pcreposix .h
pcre/study.@OBJEXT@ : pcre /study .c pcre /config .h pcre /internal .h pcre /pcre .h
# An auxiliary program makes the PCRE default character table source
pcre/chartables.c : pcre /dftables @EXEEXT @
pcre/dftables@EXEEXT@ >pcre/chartables.c
pcre/dftables@EXEEXT@ : pcre /dftables .c pcre /maketables .c pcre /pcre .h pcre /internal .h pcre /config .h
$( CC) -o pcre/dftables@EXEEXT@ $( CFLAGS) pcre/dftables.c
# Win32
w32log.@OBJEXT@ : w 32log .c errlog .h config .h jcc .h loadcfg .h miscutil .h pcre /pcre .h pcre /pcreposix .h pcrs .h project .h w 32log .h w 32taskbar .h win 32.h
w32taskbar.@OBJEXT@ : w 32taskbar .c config .h w 32log .h w 32taskbar .h
win32.@OBJEXT@ : win 32.c config .h jcc .h loadcfg .h pcre /pcre .h pcre /pcreposix .h pcrs .h project .h w 32log .h win 32.h w 32svrapi .h
2012-06-28 03:42:39 +00:00
w32.res : w 32.rc w 32res .h icons /ico 00001.ico icons /ico 00002.ico icons /ico 00003.ico icons /ico 00004.ico icons /ico 00005.ico icons /ico 00006.ico icons /ico 00007.ico icons /ico 00008.ico icons /idle .ico icons /privoxy .ico config .h
2012-05-03 18:32:18 +00:00
windres -D__MINGW32__= 0.2 -O coff -i $< -o $@
# AmigaOS
@ A M I G A O S _ O N L Y @ OBJS += amiga.o
@ A M I G A O S _ O N L Y @ i f e q ( $( shell $ ( CC ) -dumpmachine ) , m 6 8 k - a m i g a o s )
@ A M I G A O S _ O N L Y @ CFLAGS += -D__AMIGAVERSION__= \" $( VERSION_MAJOR) .$( VERSION_MINOR) $( VERSION_POINT) \" -D__AMIGADATE__= \" ` date +%d.%m.%Y` \" -W -m68020 -noixemul -fbaserel -msmall-code
@ A M I G A O S _ O N L Y @ LDFLAGS += -m68020 -noixemul -fbaserel
@ A M I G A O S _ O N L Y @ LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
@ A M I G A O S _ O N L Y @ e l s e
@ A M I G A O S _ O N L Y @ CFLAGS += -D__AMIGAVERSION__= \" $( VERSION_MAJOR) .$( VERSION_MINOR) $( VERSION_POINT) \" -D__AMIGADATE__= \" ` date +%d.%m.%Y` \" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
@ A M I G A O S _ O N L Y @ e n d i f
@AMIGAOS_ONLY@amiga.o : amiga .c amiga .h config .h
$(PROGRAM) : $( OBJS ) $( W 32_FILES )
$( LD) $( LDFLAGS) -o $( PROGRAM) $( OBJS) $( LIBS)
clean :
2012-06-28 03:42:39 +00:00
$( RM) a.out $( OBJS) $( W32_FILES) $( W32_INIS) $( PROGRAM) default.action ` find . -name TAGS -o -name tags` config.base config.tmp
2012-05-03 18:32:18 +00:00
2012-06-28 03:42:39 +00:00
tidy :
2012-05-03 18:32:18 +00:00
$( RM) ` find . -name "*~" `
$( RM) ` find . -name "#*#" ` # Emacs backup files
$( RM) ` find . -name ".\#*" `
2012-06-28 03:42:39 +00:00
clobber : tidy
2012-05-03 18:32:18 +00:00
$( RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
$( RM) -r autom4te.cache
#
2012-06-28 03:42:39 +00:00
# FIXME: What is all this?
2012-05-03 18:32:18 +00:00
#
2012-06-28 03:42:39 +00:00
$( RM) cscope.* *.pdb *.lib *.exp
2012-05-03 18:32:18 +00:00
distclean : clobber
tags : $( SRCS ) $( HDRS )
etags $( SRCS) $( HDRS)
CONF_DEST := $( shell if [ " $( prefix) " = "/usr/local" ] && [ " $( CONF_BASE) " = " $( prefix) /etc " ] ; then \
$( ECHO) " $( CONF_BASE) /privoxy " ; \
else \
$( ECHO) " $( CONF_BASE) " ; \
fi )
LOG_DEST := $( shell if [ " $( prefix) " = "/usr/local" ] && [ " $( LOGS_DEST) " = " $( prefix) /var/log/privoxy " ] ; then \
$( ECHO) "/var/log/privoxy" ; \
else \
$( ECHO) " $( LOGS_DEST) " ; \
fi )
PID_DEST := $( shell if [ " $( prefix) " = "/usr/local" ] && [ " $( PIDS_DEST) " = " $( prefix) /var/run " ] ; then \
$( ECHO) "/var/run" ; \
else \
$( ECHO) " $( PIDS_DEST) " ; \
fi )
check_doc := $( shell if [ ! -d " $( SHARE_DEST) /doc " ] && [ " $( prefix) " = "/usr/local" ] && [ -d " $( prefix) /doc " ] ; then \
$( ECHO) "1" ; \
else \
$( ECHO) "0" ; \
fi )
# If USER is specified but no GROUP, assume there is a GROUP of same name.
GROUP_T := $( shell if [ x$( GROUP) = x ] && [ x$( USER) != x ] ; then \
$( ECHO) " $( USER) " ; \
else \
$( ECHO) " $( GROUP) " ; \
fi )
install-strip :
$( MAKE) install STRIP = -s
2012-06-28 03:42:39 +00:00
# FIXME: Test USER and GROUP on Slack to make sure this works as
2012-05-03 18:32:18 +00:00
# intended.
#
2012-06-28 03:42:39 +00:00
# FIXME: id handling needs help, probably via configure, since 'id -u' is not
# universally reliable (eg Solaris). Group handling could be better.
2012-05-03 18:32:18 +00:00
# Perhaps the whole user/group validation should be done here, and simplified.
PROGRAM_V = Privoxy $( VERSION) $( CODE_STATUS)
install : CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
@# Quick test for valid USER.
@if [ -n " $( USER) " ] ; then \
$( ID) $( USER) >/dev/null || exit 1; \
fi
2012-06-28 03:42:39 +00:00
@# Test for valid group. FIXME. USER does not have to belong to GROUP
2012-05-03 18:32:18 +00:00
@# for file ownership purposes.
# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
# fi
@$( ECHO) " Creating directories, and preparing $( PROGRAM_V) installation "
$( CHMOD) $( DIR_MODE) $( MKDIR)
@$( MKDIR) $( DESTDIR) $( SBIN_DEST) $( DESTDIR) $( prefix) $( DESTDIR) $( CONF_DEST) \
$( DESTDIR) $( CONF_DEST) /templates $( DESTDIR) $( SHARE_DEST) \
$( DESTDIR) $( LOG_DEST) $( DESTDIR) $( PID_DEST)
@# Install the executable binary, strip if invoked as install-strip
@test -n " $( STRIP) " && \
$( ECHO) Installing $( PROGRAM) stripped executable to $( SBIN_DEST) || \
$( ECHO) Installing $( PROGRAM) executable to $( DESTDIR) $( SBIN_DEST)
$( INSTALL) $( INSTALL_P) $( STRIP) $( PROGRAM) $( DESTDIR) $( SBIN_DEST)
@# Install the DOCS and man page. install-sh only does one file at a time.
@# FIXME: only handles jpegs.
-@if [ $( check_doc) = 0 ] ; then \
DOC = $( DOC_DEST) ; \
else \
DOC = $( prefix) /doc/privoxy ; \
fi ; \
$( MKDIR) $( DESTDIR) $$ DOC $( DESTDIR) $$ DOC/user-manual $( DESTDIR) $$ DOC/faq $( DESTDIR) $$ DOC/developer-manual \
$( DESTDIR) $$ DOC/man-page $( DESTDIR) $$ DOC/images $( DESTDIR) $( MAN_DEST) ; \
if [ -d " $( DOK_WEB) " ] ; then \
$( ECHO) Installing FAQ, Manual, and other docs to $( DESTDIR) $$ DOC; \
for i in user-manual developer-manual faq; do \
for ii in $( DOK_WEB) /$$ i/*html; do \
$( INSTALL) $( INSTALL_T) $$ ii $( DESTDIR) $$ DOC/$$ i; \
done ; \
done ; \
for i in $( DOK_WEB) /user-manual/*jpg; do \
$( INSTALL) $( INSTALL_T) $$ i $( DESTDIR) $$ DOC/user-manual; \
done ; \
$( INSTALL) $( INSTALL_T) $( DOK_WEB) /man-page/*html $( DESTDIR) $$ DOC/man-page; \
$( INSTALL) $( INSTALL_T) $( DOK_WEB) /privoxy-index.html $( DESTDIR) $$ DOC/index.html; \
$( INSTALL) $( INSTALL_T) AUTHORS $( DESTDIR) $$ DOC; \
$( INSTALL) $( INSTALL_T) LICENSE $( DESTDIR) $$ DOC; \
$( INSTALL) $( INSTALL_T) README $( DESTDIR) $$ DOC; \
$( INSTALL) $( INSTALL_T) ChangeLog $( DESTDIR) $$ DOC; \
$( INSTALL) $( INSTALL_T) $( DOK_WEB) /p_doc.css $( DESTDIR) $$ DOC; \
$( INSTALL) $( INSTALL_T) $( DOK_WEB) /p_doc.css $( DESTDIR) $$ DOC/user-manual; \
fi
@# Not all platforms support gzipped man pages.
2012-06-28 03:42:39 +00:00
@$( ECHO) Installing man page to $( DESTDIR) $( MAN_DEST) /privoxy.1
-$( INSTALL) $( INSTALL_T) privoxy.1 $( DESTDIR) $( MAN_DEST) /privoxy.1
2012-05-03 18:32:18 +00:00
@# Change the config file default directories according to the configured ones
@$( ECHO) Rewriting config for this installation
@if [ -f config.base ] ; then \
$( CAT) config >config~ ; \
$( MV) config.base config ; \
fi
$( SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
$( SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
-@if [ $( check_doc) = 0 ] ; then \
$( SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ; \
else \
$( SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ; \
fi ; \
$( MV) config config.base
2012-06-28 03:42:39 +00:00
$( MV) config.updated config
2012-05-03 18:32:18 +00:00
2012-06-28 03:42:39 +00:00
@# Install the config support files. Test for root install, and abort
@# if there is no privoxy user, and no other user was enabled during
2012-05-03 18:32:18 +00:00
@# configure. Later, install init script if appropriate.
@$( ECHO) Installing templates to $( DESTDIR) $( CONF_DEST) /templates
@for i in ` find templates -type f` ; do \
$( INSTALL) $( INSTALL_T) $$ i $( DESTDIR) $( CONF_DEST) /templates ; \
done
@# FIXME: group/user validation is overly convoluted.
@# If superuser install ... we require a minimum of group ownership
@# of those files the daemon writes to, to be non-root owned.
@if [ " ` $( ID) |sed 's/(.*//' |sed 's/.*=//'` " = "0" ] ; then \
if [ x$( USER) = x ] || [ $( USER) = root ] ; then \
if [ x$( GROUP) = x ] || [ $( GROUP) = root ] ; then \
if [ " ` $( ID) privoxy` " ] && \
$( GROUPS) privoxy | $( SED) 's/^.*://' | $( GREP) "\<privoxy\>" >/dev/null; then \
$( ECHO) "Warning: Setting group owner to privoxy" ; \
GROUP_T = privoxy ; \
else \
$( ECHO) "******************************************************************" ; \
$( ECHO) " WARNING! WARNING! installing config files as root!" ; \
$( ECHO) " It is strongly recommended to run $( PROGRAM) as a non-root user, " ; \
$( ECHO) " and to install the config files as that user and/or group!" ; \
$( ECHO) " Please read INSTALL, and create a privoxy user and group!" ; \
$( ECHO) "*******************************************************************" ; \
exit 1 ; \
fi ; \
else \
GROUP_T = $( GROUP) ; \
fi ; \
INSTALL_CONF = " $( INSTALL_R) -g $$ GROUP_T " ; \
else \
$( ECHO) " Superuser install, installing config files as $( USER) : $( GROUP_T) " ; \
INSTALL_CONF = " $( INSTALL_R) -o $( USER) -g $( GROUP_T) " ; \
GROUP_T = $( GROUP_T) ; \
fi ; \
else \
if [ ! " `id $( USER) ` " = "`id`" ] ; then \
$( ECHO) "** WARNING ** current install user different from configured user!!" ; \
$( ECHO) "Edit may fail." ; \
fi ; \
INSTALL_CONF = " $( INSTALL_R) " ; \
fi ; \
$( ECHO) Installing configuration files to $( DESTDIR) $( CONF_DEST) ; \
for i in $( CONFIGS) ; do \
if [ " $$ i " = "default.action" ] || [ " $$ i " = "default.filter" ] ; then \
$( RM) $( DESTDIR) $( CONF_DEST) /$$ i ; \
$( ECHO) Installing fresh $$ i; \
$( INSTALL) $$ INSTALL_CONF $$ i $( DESTDIR) $( CONF_DEST) || exit 1; \
elif [ -s " $( CONF_DEST) / $$ i " ] ; then \
$( ECHO) Installing $$ i as $$ i.new ; \
$( INSTALL) $$ INSTALL_CONF $$ i $( DESTDIR) $( CONF_DEST) /$$ i.new || exit 1; \
NEW = 1; \
else \
$( INSTALL) $$ INSTALL_CONF $$ i $( DESTDIR) $( CONF_DEST) || exit 1; \
fi ; \
done ; \
if [ -n " $$ NEW " ] ; then \
$( CHMOD) $( RWD_MODE) $( DESTDIR) $( CONF_DEST) /*.new || exit 1 ; \
$( ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ; \
fi ; \
[ ! -f $( DESTDIR) $( LOG_DEST) /logfile ] && $( ECHO) Creating logfiles in $( DESTDIR) $( LOG_DEST) || \
$( ECHO) Checking logfiles in $( DESTDIR) $( LOG_DEST) ; \
$( TOUCH) $( DESTDIR) $( LOG_DEST) /logfile || exit 1 ; \
if [ x$$ USER != x ] ; then \
$( CHOWN) $$ USER $( DESTDIR) $( LOG_DEST) /logfile || \
$( ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ; \
fi ; \
if [ x$$ GROUP_T != x ] ; then \
$( CHGRP) $$ GROUP_T $( DESTDIR) $( LOG_DEST) /logfile || \
$( ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ; \
fi ; \
$( CHMOD) $( RWD_MODE) $( DESTDIR) $( LOG_DEST) /logfile || exit 1 ; \
if [ " $( prefix) " = "/usr/local" ] || [ " $( prefix) " = "/usr" ] ; then \
if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
$( SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
$( SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
$( SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
$( SED) 's+%USER%+$(USER)+' | \
$( SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ; \
$( INSTALL) $( INSTALL_P) slackware/rc.privoxy $( DESTDIR) /etc/rc.d/ ; \
$( ECHO) "Installing for Slackware." ; \
$( ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ; \
2012-06-28 03:42:39 +00:00
elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
$( ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ; \
$( SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init | \
$( SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' | \
$( SED) " s,^PRIVOXY_USER=.*,PRIVOXY_USER= $$ USER, " > init.tmp ; \
$( INSTALL) $( INSTALL_P) init.tmp $( DESTDIR) /etc/rc.d/init.d/privoxy && $( RM) init.tmp; \
$( MKDIR) $( DESTDIR) /etc/logrotate.d/ ; \
$( ECHO) " Installing logrotate script to $( DESTDIR) /etc/logrotate.d/ " ; \
$( INSTALL) -m 0644 privoxy.logrotate $( DESTDIR) /etc/logrotate.d/privoxy ; \
2012-05-03 18:32:18 +00:00
elif [ -d $( DESTDIR) /etc/init.d ] && [ -w $( DESTDIR) /etc/init.d ] ; then \
$( ECHO) " Installing generic init script to $( DESTDIR) /etc/init.d/privoxy " ; \
$( ECHO) "Please check that the PATHs are correct, and edit if needed." ; \
$( INSTALL) $( INSTALL_P) privoxy-generic.init $( DESTDIR) /etc/init.d/privoxy ; \
fi ; \
else \
$( ECHO) "No init script installed, install it manually if needed" ; \
fi
$( RM) config.base config.tmp
@# mmmmm, good.
@$( ECHO) " $( PROGRAM_V) installation succeeded! "
@$( ECHO) " The Privoxy configuration files have been installed in $( DESTDIR) $( CONF_DEST) "
# rmdir is used as a precaution since it will not remove non-empty
# directories. RH init script creates lock file and pid file.
uninstall : CONF_DEST LOG_DEST PID_DEST check_doc
@$( ECHO) Starting Privoxy uninstallation
@# KILL privoxy if running
@# XXX: the chkconfig line may need a DESTDIR prefix.
2012-06-28 03:42:39 +00:00
-@if [ -f $( DESTDIR) /etc/redhat-release ] && [ -x $( DESTDIR) /etc/rc.d/init.d/privoxy ] ; then \
$( DESTDIR) /etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ; \
chkconfig --del $( PROGRAM) 2>/dev/null; \
fi
2012-05-03 18:32:18 +00:00
-@test -f $( DESTDIR) $( PID_DEST) /privoxy.pid && $( ECHO) Stopping $( PROGRAM) && \
$( KILL) ` $( CAT) $( DESTDIR) $( PID_DEST) /privoxy.pid` || :
-@test -f $( DESTDIR) /var/run/privoxy.pid && $( ECHO) Stopping $( PROGRAM) && \
$( KILL) ` $( CAT) $( DESTDIR) /var/run/privoxy.pid ` || :
@# Program binary
@$( ECHO) Removing $( PROGRAM) binary
$( RM) $( DESTDIR) $( SBIN_DEST) /$( PROGRAM) $( SBIN_DEST) /$( PROGRAM) ~
@# config files and dir, and maybe old install backups
-@if [ -d $( DESTDIR) $( CONF_DEST) ] ; then \
$( ECHO) Saving $( PROGRAM) config files to $( DESTDIR) /tmp/$( PROGRAM) -save ; \
$( MKDIR) $( DESTDIR) /tmp/$( PROGRAM) -save ; \
cd $( DESTDIR) $( CONF_DEST) ; \
for i in $( DESTDIR) $( CONFIGS) ; do \
[ -f $$ i ] && $( CP) $$ i $( DESTDIR) /tmp/$( PROGRAM) -save ; \
done ; \
fi
@$( ECHO) Removing $( PROGRAM) config files
-@for i in $( DESTDIR) $( CONFIGS) ; do \
test -f $( CONF_DEST) /$$ i && $( ECHO) Removing $$ i ; \
$( RM) $( DESTDIR) $( CONF_DEST) /$$ i $( DESTDIR) $( CONF_DEST) /$$ i~ $( DESTDIR) $( CONF_DEST) /$$ i.new ; \
done
-@test -d $( DESTDIR) $( CONF_DEST) /templates && $( RM) -r $( DESTDIR) $( CONF_DEST) /templates && \
$( ECHO) " Removing $( DESTDIR) $( CONF_DEST) /templates/* "
@# man page and docs
@$( ECHO) Removing $( PROGRAM) docs
2012-06-28 03:42:39 +00:00
-$( RM) $( DESTDIR) $( MAN_DEST) /privoxy.1*
2012-05-03 18:32:18 +00:00
-$( RM) -r $( DESTDIR) $( DOC_DEST) || $( RM) -r $( DESTDIR) $( prefix) /doc/privoxy
@# Log and pidfile
@$( ECHO) Removing $( PROGRAM) logs
-$( RM) $( DESTDIR) $( LOG_DEST) /logfile $( DESTDIR) $( PID_DEST) /privoxy.pid
@# Final clean up of unused directories. Special handling of CONF and LOG
# destinations.
@$( ECHO) Removing $( PROGRAM) directories
@for i in $( DESTDIR) $( LOG_DEST) $( DESTDIR) $( CONF_DEST) ; do \
if test -d $$ i; then \
$( ECHO) Removing $$ i ; \
$( RMDIR) $$ i || $( ECHO) " $$ i is not empty, not removed " ; \
fi ; \
done
@if [ ! " $( prefix) " = "/usr/local" ] ; then \
for i in $( DESTDIR) $( MAN_DEST) $( DESTDIR) $( MAN_DIR) $( DESTDIR) $( SHARE_DEST) /doc \
$( DESTDIR) $( SHARE_DEST) $( DESTDIR) $( SBIN_DEST) ; do \
if test -d $$ i; then \
$( ECHO) Removing $$ i ; \
$( RMDIR) $$ i || $( ECHO) " $$ i is not empty, not removed " ; \
fi ; \
done ; \
if test $( LOG_DEST) != /var/log/privoxy && test -d $( DESTDIR) $( prefix) /var/log; then \
$( ECHO) Removing $( DESTDIR) $( prefix) /var/log ; \
$( RMDIR) $( DESTDIR) $( prefix) /var/log || $( ECHO) " $( DESTDIR) $( prefix) /var/log is not empty, not removed " ; \
fi ; \
if test $( PID_DEST) != /var/run && test -d $( DESTDIR) $( prefix) /var/run; then \
$( ECHO) Removing $( DESTDIR) $( prefix) /var/run ; \
$( RMDIR) $( DESTDIR) $( prefix) /var/run || $( ECHO) " $( DESTDIR) $( prefix) /var/run is not empty, not removed " ; \
fi ; \
if test $( prefix) /var != /var && test -d $( DESTDIR) $( prefix) /var; then \
$( ECHO) Removing $( DESTDIR) $( prefix) /var ; \
$( RMDIR) $( DESTDIR) $( prefix) /var || $( ECHO) " $( DESTDIR) $( prefix) /var is not empty, not removed " ; \
fi ; \
if test $( prefix) != / && test $( prefix) != /usr && test -d $( DESTDIR) $( prefix) ; then \
$( ECHO) Removing $( DESTDIR) $( prefix) ; \
$( ECHO) Removing installation directory $( DESTDIR) $( prefix) ; \
$( RMDIR) $( DESTDIR) $( prefix) || $( ECHO) " $( DESTDIR) $( prefix) is not empty, not removed " ; \
fi ; \
fi
2012-06-28 03:42:39 +00:00
@# init scripts and logrotate
2012-05-03 18:32:18 +00:00
@if [ " $( prefix) " = "/usr/local" ] || [ " $( prefix) " = "/usr" ] ; then \
$( ECHO) Removing $( PROGRAM) init script ; \
if [ -f $( DESTDIR) /etc/slackware-version ] && \
[ -d $( DESTDIR) /etc/rc.d/ ] && [ -w $( DESTDIR) /etc/rc.d/ ] ; then \
$( RM) $( DESTDIR) /etc/rc.d/rc.privoxy ; \
2012-06-28 03:42:39 +00:00
elif [ -f $( DESTDIR) /etc/redhat-release ] && [ -d $( DESTDIR) /etc/rc.d/init.d/ ] \
&& [ -w $( DESTDIR) /etc/rc.d/init.d/ ] ; then \
$( RM) $( DESTDIR) /etc/rc.d/init.d/privoxy $( DESTDIR) /etc/logrotate.d/privoxy; \
2012-05-03 18:32:18 +00:00
elif [ -d $( DESTDIR) /etc/init.d ] && [ -w $( DESTDIR) /etc/init.d ] ; then \
$( RM) $( DESTDIR) /etc/init.d/privoxy ; \
else \
$( ECHO) "Unable to remove privoxy init script, not installed or permission denied" ; \
fi ; \
fi
@$( ECHO) Privoxy uninstalled, bye
coffee :
@perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \
-e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \
-e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \
-e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \
-e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
-e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
-e '187,54,220,125,193,51,228,11,1,0,0);' | zcat
2012-06-28 03:42:39 +00:00
#############################################################################
## Local Variables:
## tab-width: 3
## end:
# $Log: GNUmakefile.in,v $
# Revision 1.180 2009/02/28 08:28:14 fabiankeil
# pcrs.o doesn't depend on pcre/pcre.h if we are linking
# dynamically. Patch provided by drauh in #2056286.
#
# Revision 1.179 2009/02/22 14:48:31 hal9
# Updates to the 'make webserver' target that recreates the home page and uploads
# fresh documents to reflect new SF realities, and more explanation of process.
#
# Revision 1.178 2009/02/08 18:35:48 fabiankeil
# Move the match-all section into a separate file
# (match-all.action) so we can safely overwrite the
# default actions when updating. Based on Roland's
# patch #1563977.
#
# Revision 1.177 2009/01/13 16:44:32 fabiankeil
# Delete the standard.action file after moving
# the pre-settings over to the default actions.
#
# Revision 1.176 2008/09/21 13:24:37 fabiankeil
# Add Roland's man page fixes from 19_manpage_fixup.dpatch.
#
# Revision 1.175 2008/08/30 12:03:07 fabiankeil
# Remove FEATURE_COOKIE_JAR.
#
# Revision 1.174 2008/07/18 17:50:47 fabiankeil
# Fix whitespace.
#
# Revision 1.173 2008/06/18 18:28:42 fabiankeil
# Remove PDF-related stuff.
#
# Revision 1.172 2008/06/17 16:16:08 fabiankeil
# - Stop building text files nobody cares about.
# - Update copyright year.
#
# Revision 1.171 2008/06/13 15:24:57 fabiankeil
# Move previously inline'd Perl code for the config-file target
# into a separate file, have it work with older perl releases,
# clean it up a bit and fix the "underlining" code.
#
# Revision 1.170 2008/06/12 16:38:50 fabiankeil
# Add third-level domain to URL in dok-get target.
#
# Revision 1.169 2008/06/09 17:28:31 fabiankeil
# - Recommend https for releasing files.
# - Fix a warning about datarootdir being ignored.
#
# Revision 1.168 2008/05/23 18:03:12 fabiankeil
# - Shorten meta description inserted in dok-webserver
# and dok-index target.
# - In config-file target, unset LANG for w3m as we
# might otherwise end up with multi-byte characters.
#
# Revision 1.167 2008/05/23 14:39:09 fabiankeil
# Silence dok-user complaint about @# not being found.
#
# Revision 1.166 2008/05/23 14:04:57 fabiankeil
# - Get config-file target working with more recent Perl
# versions. The generated file is still messed up, though.
# - Fix comment typo.
#
# Revision 1.165 2008/05/22 16:57:23 fabiankeil
# Fix coffee machine.
#
# Revision 1.164 2008/05/22 10:26:26 fabiankeil
# - Remove parsers.@OBJEXT@'s dependency on encode.h.
# - Include Emacs backup files in tidy target again.
#
# Revision 1.163 2008/05/04 18:01:53 fabiankeil
# Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h.
#
# Revision 1.162 2008/03/30 13:31:42 fabiankeil
# Add DESTDIR support for the uninstall target.
#
# Revision 1.161 2008/03/30 13:19:13 fabiankeil
# Add DESTDIR support for the install target. Closes PR#1910612.
# Patch by Radoslaw Zielinski with minor modifications.
#
# Revision 1.160 2008/03/27 18:27:19 fabiankeil
# Remove kill-popups action.
#
# Revision 1.159 2008/03/21 11:13:53 fabiankeil
# Only gather host information if it's actually needed.
# Also move the code out of accept_connection() so it's less likely
# to delay other incoming connections if the host is misconfigured.
#
# Revision 1.158 2007/12/11 21:29:25 fabiankeil
# Fix dependency list for cgiedit.c.
#
# Revision 1.157 2007/12/10 02:28:02 hal9
# Unset $LANG for text processing of docs so we get pure text.
#
# Revision 1.156 2007/11/15 03:17:43 hal9
# Some workaround changes to the config file perl stuff and comments, which is
# broken here all by itself on perl 5.8.8.
#
# Revision 1.155 2007/09/22 16:23:25 fabiankeil
# Update copyright line.
#
# Revision 1.154 2007/02/07 11:52:40 fabiankeil
# Fix suse-dist as described in BR#1654052.
# (I didn't test it, but it's done the same
# way in redhat-dist which is known to work).
#
# Revision 1.153 2007/01/07 07:36:36 joergs
# Added AmigaOS4 support.
#
# Revision 1.152 2006/12/13 14:53:51 etresoft
# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
#
# Revision 1.151 2006/11/30 01:08:55 hal9
# Fix problem with variable declarations in the Slackware section. Thanks to higuita.
#
# Revision 1.150 2006/10/25 11:55:45 fabiankeil
# Fix sed regexes for rewriting "confdir ." and "logdir .".
# Thanks to Darel Henman for reporting this.
#
# Revision 1.149 2006/10/11 01:40:28 hal9
# Apply patch from Neil McCalden to fix syntax issue.
#
# Revision 1.148 2006/09/26 10:57:58 hal9
# Including Karsten's patch to fix make create-snapshot.
#
# Revision 1.147 2006/09/13 01:25:16 hal9
# Make sure install forces in new default.action, default.filter, and
# standard.filter. These are privoxy files, not user files.
#
# Revision 1.146 2006/09/08 23:57:19 hal9
# User manual images are now user-manual doc directory, and fix make install
# target accordingly.
#
# Revision 1.145 2006/09/08 02:32:00 hal9
# Various changes to implement building and installing docs to be compatible
# with the new "user-manual" settings in config from Roland. Docbook does not
# seem to like dealing with more than one css file, so workaround that here.
# Change 'make install' so it provides p_doc.css in the user-manual doc
# directory so that functions well, and lastly modify 'make install' so that the
# PATH is automatically set, and the 'user-manual' directive should done during
# the install.
#
# Revision 1.144 2006/09/07 22:53:20 hal9
# Make sure config sgml build related artifacts are cleaned out.
#
# Revision 1.143 2006/09/02 15:59:40 hal9
# Add to code status to make install output.
#
# Revision 1.142 2006/08/29 01:46:24 hal9
# Add user.filter to $CONFIGS.
#
# Revision 1.141 2006/08/12 03:54:37 david__schmidt
# Windows service integration
#
# Revision 1.140 2006/07/18 14:48:45 david__schmidt
# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
# with what was really the latest development (the v_3_0_branch branch)
#
# Revision 1.104.2.28 2004/06/10 17:06:05 hal9
# Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the
# only place it is used.
#
# Revision 1.104.2.27 2004/02/07 16:11:10 oes
# Make clobber remove the autom4te.cache dir.
# Closes BR #889300
#
# Revision 1.104.2.26 2004/01/31 16:32:25 oes
# Adding a check for an htmldoc variant from the debian diff
#
# Revision 1.104.2.25 2004/01/31 01:15:33 oes
# Fixed a typo; updated copyright notice
#
# Revision 1.104.2.24 2003/12/03 10:30:02 oes
# - Added new dependency: actions.c -> ssplit.h
# - Excluded PDF docs from src tarball
#
# Revision 1.104.2.23 2003/04/20 17:28:52 hal9
# Strip trailing spaces from config-file generation, bug #724596.
#
# Revision 1.104.2.22 2003/03/28 03:32:01 hal9
# Minor changes for Privoxy home page:
# - Handle © more sanely
# - include link to announce.txt
# Also, disable 'make announce' target.
#
# Revision 1.104.2.21 2002/11/04 07:04:03 hal9
# Catch up with main trunk install/uninstall. Quiet output, etc.
#
# Revision 1.104.2.20 2002/10/25 02:44:22 hal9
# Port of make install, etc from main trunk. Needs testing! Add Slackware
# support, and other related changes. Update related docs.
#
# Revision 1.104.2.19 2002/09/26 22:50:02 hal9
# New user-manual examples in config-file are getting wrapped. Add warning.
#
# Revision 1.104.2.18 2002/08/23 12:22:40 oes
# Added warning to broken install target
#
# Revision 1.104.2.17 2002/08/16 03:19:34 hal9
# More (minor) cleanup of html before pdf processing to make some relative
# links work as pdf -> pdf. Upload pdf as zip archive now.
#
# Revision 1.104.2.16 2002/08/14 16:43:27 hal9
# Added pdf docs to make webserver target.
#
# Revision 1.104.2.15 2002/08/11 20:02:41 hal9
# New targets for man page (make man) and pdf (make dok-pdf) targets.
#
# Revision 1.104.2.14 2002/08/10 11:19:37 oes
# - Make -Ipcre (again) conditional on STATIC_PCRE
# - $(RPMBUILD) -> $(RPM) for SuSE
# - Add dependency: pcrs.o deps on config.h
#
# Revision 1.104.2.13 2002/08/07 15:13:54 hal9
# Remove pdf2 target, and make it dok-shtml (single page html for pdf
# conversion).
#
# Revision 1.104.2.12 2002/08/06 11:29:36 oes
# Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
#
# Revision 1.104.2.11 2002/07/30 19:38:11 hal9
# Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what
# *I think* it was supposed to be (was breaking upload targets since it was
# set to RPM_VERSION).
#
# Revision 1.104.2.10 2002/07/27 22:56:53 kick_
# cleanups of the redhat-srpm target
#
# Revision 1.104.2.9 2002/07/26 15:17:02 oes
# - Added generation of default.action from defaul.action.master
# - Deleted obsolete re_filterfile.txt generation
#
# Revision 1.104.2.8 2002/07/12 10:04:32 kick_
# added helper targets to the makefile. They shouldn't break anything, but
# make my life a lot easier.
#
# The new rpm has been splitted into two parts, one for package installation/
# removal, one for package building.
# Therefore rpm -ta isn't a valid command anymore and needs to be replaced
# by rpmbuild -ta (this is backwards compatible)
#
# Revision 1.104.2.7 2002/06/07 00:23:47 hal9
# Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
# thus breaking them completely.
#
# Revision 1.104.2.6 2002/06/02 03:26:25 hal9
# Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
# index.html and team/index.html)
#
# Revision 1.104.2.5 2002/05/30 15:35:01 hal9
# This is more cleanup on the make config-file target. Most issues for
# automatic generation are taken care of. There are still some problems
# that require hand editing. Namely, some of the examples that are > 80 chars.
#
# Revision 1.104.2.4 2002/05/29 02:12:17 hal9
# Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
# new target is 'make config-file', _not_ make config.
#
# Revision 1.104.2.3 2002/05/29 02:05:48 hal9
# 'make config' target added (WIP) for future generation of config file from
# text in u-m so the two are in sync. New generated config, which requires
# some hand editing for the time being.
#
# Revision 1.104.2.2 2002/05/28 02:32:55 hal9
# New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
# not being cleaned up in doc/webserver.
#
# Revision 1.104.2.1 2002/05/26 17:19:34 hal9
# Remove Table of Contents from readme with oes's dsl trick.
#
# Revision 1.104 2002/05/24 00:03:49 oes
# Use p_doc.css for the Homepage for consistency
#
# Revision 1.103 2002/05/23 23:19:00 oes
# Use dsl without TOC for the homepage
#
# Revision 1.102 2002/05/16 01:20:17 hal9
# make announce target added.
#
# Revision 1.101 2002/05/15 12:28:46 oes
# Trying to keep Hal happy :)
#
# Revision 1.100 2002/05/08 13:48:18 hal9
# Ooops, that trashed JB v2.0.2 comment. Fixed.
#
# Revision 1.99 2002/05/08 13:42:07 hal9
# This fixes the numbering problem on index.html in contact info section (.1.). Using
# perl, since its way too convoluted to try to fix proper with docbook.
#
# Revision 1.98 2002/05/03 14:33:06 oes
# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
#
# Revision 1.97 2002/04/27 20:27:43 swa
# no longer needed due to new
# PACKAGE_VERSION process
#
# Revision 1.96 2002/04/27 17:44:32 morcego
# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
# - Using the RM macro everywhere rm is called (either we use, or don't)
# - Same for RPM
#
# Revision 1.95 2002/04/27 15:37:25 swa
# replacing directory in document creation process
# no longer necessary.
#
# Revision 1.94 2002/04/27 08:23:29 swa
# pdf process reviewed and cleaned up
#
# Revision 1.93 2002/04/27 04:55:53 morcego
# privoxy-cl.spec now gets removed by clobber target
#
# Revision 1.92 2002/04/27 04:53:40 morcego
# Adding --exclude "PACKAGERS" to every tar command that applies (not for
# webserver target)
#
# Revision 1.91 2002/04/27 04:44:51 morcego
# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
# the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
# conectiva-upload
# genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
# for Conectiva Linux
#
# Revision 1.90 2002/04/26 17:46:53 swa
# be consistent
#
# Revision 1.89 2002/04/26 17:20:54 swa
# just produce single html files to proces them later with Destiller or somesuch. looks prettier.
#
# Revision 1.88 2002/04/25 19:13:57 morcego
# Removed RPM release number declaration on configure.in
# Changed makefile to use given value for RPM_PACKAGEV when on uploading
# targets (will produce an error, explaining who to do it, if no value
# if provided).
#
# Revision 1.87 2002/04/23 14:10:59 swa
# now create pdf documents
#
# Revision 1.86 2002/04/15 04:30:27 hal9
# Missed two -pi.bak's on perl/cygwin problem.
#
# Revision 1.85 2002/04/14 01:05:34 hal9
# Revert dok-webserver change for SF logo.
#
# Revision 1.84 2002/04/13 22:43:25 hal9
# -Fix dok-webserver for SF logo (more perl).
# -Change all perl -pi to perl -pi.bak for Cygwin problem.
#
# Revision 1.83 2002/04/12 09:39:25 oes
# Excluding yet more files from tarball; making dist warning yet more scary
#
# Revision 1.82 2002/04/11 21:07:11 oes
# Excluding more files from tarball build
#
# Revision 1.81 2002/04/11 14:40:27 oes
# Fixed typo -- Thanks, Moritz!
#
# Revision 1.80 2002/04/11 12:50:00 oes
# Fixed tarball-dist target
#
# Revision 1.79 2002/04/11 06:49:28 oes
# webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
#
# Revision 1.78 2002/04/09 13:37:11 sarantis
# fix tar options typo
#
# Revision 1.77 2002/04/09 13:28:53 swa
# build suse and gen-dist with html docs
#
# Revision 1.76 2002/04/08 22:43:41 oes
# Fix: Include dotfiles in fixing webserver permissions
#
# Revision 1.75 2002/04/08 22:14:59 oes
# Silencing tar warnings in the web* targets
#
# Revision 1.74 2002/04/08 15:22:44 hal9
# This has finishing touches for dok building. Should be ready to go.
# -The main doc build is now 'make dok', should work on Redhat too.
# -Removed man page from main doc build. It is built separately due to
# perl scripts that most aren't likely to have.
#
# Revision 1.73 2002/04/08 14:03:24 oes
# oes for al: Fix install target
#
# Revision 1.72 2002/04/08 13:42:11 oes
# Added safety check to *-dist targets; fixed permissions for feedback logfile
#
# Revision 1.71 2002/04/07 20:32:03 hal9
# -Add meta data kludge for make dok-webserver via $(PERL).
# -Add subdirs for 'make dok-release'.
#
# Revision 1.70 2002/04/07 08:59:40 swa
# generated files. do NOT edit.
# fixed directory bug in makefile.
#
# Revision 1.69 2002/04/07 08:10:47 swa
# create some of the webserver docs
# automatically (in particular if
# those docs recycle other documentation
# fragments). Now committed webserver's
# index file.
#
# Revision 1.68 2002/04/07 07:58:11 swa
# create some of the webserver docs
# automatically (in particular if
# those docs recycle other documentation
# fragments)
#
# Revision 1.67 2002/04/07 05:31:42 hal9
# Add 'dok-release' target:
# -Set doc entities to VERSION and CODE_STATUS during make.
# -Set doc conditional content flags (stable vs non-stable).
# A separate target for the time being but needs to be incorporated into
# dok build at some point.
# -Filter out a spurious ^G from new man page > html converion in man2html.
#
# Revision 1.66 2002/04/06 20:28:21 jongfoster
# Prettifying groff2html.
# Using GNU Make's conditional makefile feature rather than shell "if"s.
# (The shell "if"s were hiding errors)
# "perl" -> "$(PERL)"
# Spaces->tabs in a couple of places.
#
# Revision 1.65 2002/04/06 05:16:39 hal9
# -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
# -Both of these will soon be generated files.
#
# Revision 1.64 2002/04/04 22:14:51 oes
# No longer rely on find honoring -iname
#
# Revision 1.63 2002/04/04 21:06:22 swa
# cosmetics.
#
# Revision 1.62 2002/04/04 20:49:50 swa
# attempt to consolidate the
# different dokbook versions.
#
# Revision 1.61 2002/04/04 19:18:21 swa
# readme was leftover directory. use w3m instead
# of lynx to be consistent among developers. use
# consistent target naming.
#
# Revision 1.60 2002/04/04 12:25:41 oes
# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
#
# Revision 1.59 2002/04/04 08:32:45 swa
# wrong name for tarball-dist target. further fixed content of tarball dist
#
# Revision 1.58 2002/04/04 06:32:58 hal9
# New dok targets for make readme.
#
# Revision 1.57 2002/04/04 00:36:36 gliptak
# always use pcre for matching
#
# Revision 1.56 2002/04/03 22:28:03 gliptak
# Removed references to gnu_regex
#
# Revision 1.55 2002/04/03 19:54:29 swa
# freebsd tested to work. attempt to move tarball dist target forward
#
# Revision 1.54 2002/04/03 14:54:07 oes
# Standard clean and clobber semantics II
#
# Revision 1.53 2002/04/03 14:19:16 oes
# Standard clean and clobber semantics
#
# Revision 1.52 2002/04/03 02:56:18 hal9
# Revert previous FAQ numbering kludge.
#
# Revision 1.51 2002/04/02 13:03:56 oes
# Added fix for webserver permissions
#
# Revision 1.50 2002/04/02 03:46:24 hal9
# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
# to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
#
# Revision 1.49 2002/03/30 22:20:12 swa
# cd didn't work. neither did find.
#
# Revision 1.48 2002/03/30 19:04:06 swa
# people release differently. no good.
# I want to make parts of the docs only.
#
# Revision 1.47 2002/03/30 09:05:21 swa
# better packaging. better rpm building.
# tar failed on sun (no exclude there).
#
# Revision 1.46 2002/03/29 20:09:01 swa
# al's patch
#
# Revision 1.45 2002/03/29 19:45:45 swa
# for lazy swa
#
# Revision 1.44 2002/03/29 17:42:44 gliptak
# Correcting for Solaris tar limitations
#
# Revision 1.43 2002/03/29 07:40:03 swa
# fixed make webserver. doh
#
# Revision 1.42 2002/03/29 06:59:04 swa
# other users could not modify files on webserver
#
# Revision 1.41 2002/03/28 20:43:00 swa
# set make correctly
#
# Revision 1.40 2002/03/28 04:22:44 hal9
# More on man2html stuff.
#
# Revision 1.39 2002/03/28 01:04:14 hal9
# More man2html stuff for docs.
#
# Revision 1.38 2002/03/27 16:02:30 swa
# have a generic target
#
# Revision 1.37 2002/03/27 15:30:26 swa
# have a consistent appearance
#
# Revision 1.36 2002/03/27 14:58:08 swa
# can be used by mutilple targets
#
# Revision 1.35 2002/03/27 14:53:19 swa
# added solaris-dist
#
# Revision 1.34 2002/03/27 10:30:11 swa
# we want a html man file on the webserver
#
# Revision 1.33 2002/03/27 03:05:35 hal9
# Added man2html target for docs (redhat-dok only for now)
#
# Revision 1.32 2002/03/26 22:29:54 swa
# we have a new homepage!
#
# Revision 1.31 2002/03/26 14:00:18 swa
# fixed make tarball, tarball-dist, tarball-clean
#
# Revision 1.30 2002/03/25 12:52:25 swa
# new targets
#
# Revision 1.29 2002/03/24 17:03:55 jongfoster
# Name change
#
# Revision 1.28 2002/03/24 16:19:48 swa
# configure needs to be generated.
#
# Revision 1.27 2002/03/24 16:13:57 swa
# generated files are a nono in cvs
#
# Revision 1.26 2002/03/24 15:36:02 swa
# did not build.
#
# Revision 1.25 2002/03/24 14:31:08 swa
# remove more crappy files. set RPM
# release version correctly.
#
# Revision 1.24 2002/03/24 14:19:55 swa
# set rpm package release in configure.in. nowhere else.
#
# Revision 1.23 2002/03/24 13:06:49 swa
# suse-clean now runs fine
#
# Revision 1.22 2002/03/24 12:56:21 swa
# name change related issues.
#
# Revision 1.21 2002/03/24 12:43:57 swa
# name change
#
# Revision 1.20 2002/03/24 11:39:17 jongfoster
# Renaming config files
#
# Revision 1.19 2002/03/22 20:53:03 morcego
# - Ongoing process to change name to JunkbusterNG
# - configure/configure.in: no change needed
# - GNUmakefile.in:
# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
# - PROGRAM = jbng@EXEEXT@
# - rh-spec now references as junkbusterng-rh.spec
# - redhat-upload: references changed to junkbusterng-* (package names)
# - tarball-dist: references changed to JunkbusterNG-distribution-*
# - tarball-src: now JunkbusterNG-*
# - install: initscript now junkbusterng.init and junkbusterng (when
# installed)
# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
# - junkbusterng.spec:
# - References to the expression ijb where changed where possible
# - New package name: junkbusterng (all in lower case, acording to
# the LSB recomendation)
# - Version changed to: 2.9.13
# - Release: 1
# - Added: junkbuster to obsoletes and conflicts (Not sure this is
# right. If it obsoletes, why conflict ? Have to check it later)
# - Summary changed: Stefan, please check and aprove it
# - Changes description to use the new name
# - Sed string was NOT changed. Have to wait to the manpage to
# change first
# - Keeping the user junkbuster for now. It will require some aditional
# changes on the script (scheduled for the next specfile release)
# - Added post entry to move the old logfile to the new log directory
# - Removing "chkconfig --add" entry (not good to have it automaticaly
# added to the startup list).
# - Added preun section to stop the service with the old name, as well
# as remove it from the startup list
# - Removed the chkconfig --del entry from the conditional block on
# the preun scriptlet (now handled on the %files section)
# - junkbuster.init: renamed to junkbusterng.init
# - junkbusterng.init:
# - Changed JB_BIN to jbng
# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
# be used where necessary (config dir)
#
# Aditional notes:
# - The config directory is /etc/junkbuster yet. Have to change it on the
# specfile, after it is changes on the code
# - The only files that got renamed on the cvs tree were the rh specfile and
# the init file. Some file references got changes on the makefile and on the
# rh-spec (as listed above)
#
# Revision 1.18 2002/03/21 23:00:00 swa
# want to autogenerate stuff.
#
# Revision 1.17 2002/03/19 19:30:04 morcego
# - Fixing stylesheet checking on configure. If it is found, no further checks
# should be done
#
# - configure will now check for db2html or docbook2html (should work now
# on SuSe without the docbktls package)
#
# Revision 1.16 2002/03/14 22:32:32 hal9
# Bumped the RPM version.
#
# Revision 1.15 2002/03/08 20:00:28 swa
# some leftovers.
#
# Revision 1.14 2002/03/07 18:25:56 swa
# synced redhat and suse build process
#
# Revision 1.13 2002/03/07 17:17:56 oes
# (Hopefully) fixed for older make versions
#
# Revision 1.12 2002/03/07 15:28:27 swa
# more informative
#
# Revision 1.11 2002/03/06 14:33:18 sarantis
# Use proper temp file, not "abc".
#
# Revision 1.10 2002/03/06 14:19:35 sarantis
# Cleanup PID_FILE_PATH from redhat-dist target
#
# Revision 1.9 2002/03/05 17:31:11 morcego
# Search for docbook.dsl. Should solve portability problems for SuSe.
#
# Revision 1.8 2002/03/05 14:07:42 morcego
# configure now detects rpm topdir, and change GNUmakefile acordingly
# (based on sugestion by Sarantis Paskalis)
#
# Revision 1.7 2002/03/05 13:43:28 morcego
# Checking for text browser, so redhat-dok can work.
#
# Revision 1.6 2002/03/05 13:10:51 morcego
# Changes to implement redhat-dok (Hal Burgiss)
# Changes to make it work on other distros and out-of-the-shelf configurations
#
# Revision 1.5 2002/02/27 15:30:39 hal9
# Reset $(RPM_PACKAGEV) to 1 (was 2)
#
# Revision 1.4 2002/01/17 21:44:04 jongfoster
# Adding urlmatch.[ch]
#
# Revision 1.3 2002/01/04 15:26:08 oes
# Added tarball-src target
#
# Revision 1.2 2001/12/30 14:07:31 steudten
# - Add signal handling (unix)
# - Add SIGHUP handler (unix)
# - Add creation of pidfile (unix)
# - Add action 'top' in rc file (RH)
# - Add entry 'SIGNALS' to manpage
# - Add exit message to logfile (unix)
#
# Revision 1.1 2001/12/01 11:22:57 jongfoster
# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
# make break in a more obvious way.
# Adding .PHONY section.
#
# Revision 1.40 2001/12/01 00:24:11 jongfoster
# Renaming various config files
# Fixing CR->CRLF under Win32 (I hope)
#
# Revision 1.39 2001/11/06 12:07:30 steudten
# Add --clean for building rpm in target redhat-dist.
#
# Revision 1.38 2001/11/05 21:35:23 steudten
# Complete rewrite for the 'redhat-dist' target.
# Checks for writeable RPM build directories for calling user.
# So you must not be root, just set the modes to 1777 to
# build a RH package.
# Fix the upload-target to be arch independant.
# Add target for 'solaris-dist' - coming soon.
#
# Revision 1.37 2001/11/01 00:52:04 hal9
# Redhat-upload stuff per Stefan.
#
# Revision 1.36 2001/10/31 19:26:13 swa
# automate process of uploading new releases
# to sf.
#
# Revision 1.35 2001/10/15 22:14:59 joergs
# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
# the general CFLAGS already.
#
# Revision 1.34 2001/10/15 18:28:06 steudten
# remove config.cache for target clobber.
# Cleanup make dist for RH and S.u.S.E.
#
# Revision 1.33 2001/10/10 12:43:33 oes
# Added ugly hack to make install target work at least for some setups.
#
# Revision 1.32 2001/10/09 22:38:19 jongfoster
# Correcting actionsfile filename for Win32 INI build
#
# Revision 1.31 2001/09/23 10:13:48 swa
# upload process established. run make webserver and
# the documentation is moved to the webserver. documents
# are now linked correctly.
#
# Revision 1.30 2001/09/19 17:55:49 oes
# Fixed CFLAGS
#
# Revision 1.29 2001/09/16 17:34:27 jongfoster
# Removing showargs.[ch], adding cgi(simple|edit).[ch]
# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
# of build problems.
#
# Revision 1.28 2001/09/13 15:19:08 swa
# we want text files as well.
#
# Revision 1.27 2001/09/13 13:11:37 steudten
#
# Replace DEBUG_CFLAGS with OTHER_CFLAGS
#
# Revision 1.26 2001/09/12 23:44:54 david__schmidt
# Mac OSX (Darwin) support added.
#
# Revision 1.25 2001/09/12 22:55:45 joergs
# AmigaOS support added.
#
# Revision 1.24 2001/09/12 17:28:59 david__schmidt
#
# OS/2 port: update autoconf'd support for the platform.
#
# Revision 1.23 2001/09/12 16:28:42 swa
# added "make dok" section to generate html pages from
# the sgml source documents. note that the we do not want
# generated stuff in cvs.
#
# Revision 1.22 2001/09/10 16:31:23 swa
# buildroot definition in the specfile fucks up the build
# process under suse. hence I moved it to the "rpm -ta"
# command
#
# Revision 1.21 2001/09/10 11:12:49 oes
# Turning on -Wall
#
# Revision 1.20 2001/08/02 22:04:29 jongfoster
# Removing some remaining references to obsolete w32rulesdlg.[ch]
#
# Revision 1.19 2001/07/30 22:14:03 jongfoster
# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
#
# Revision 1.18 2001/07/29 17:09:17 jongfoster
# Major changes to build system in order to fix these bugs:
# - pthreads under Linux was broken - changed -lpthread to -pthread
# - Compiling in MinGW32 mode under CygWin now correctly detects
# which shared libraries are available
# - Solaris support (?) (Not tested under Solaris yet)
#
# Revision 1.17 2001/07/28 16:44:54 oes
# Fixed sed LF->CRLF conversion and removed deprecated files
#
# Revision 1.16 2001/07/15 19:45:33 jongfoster
# Added support for linking with POSIX threads library
#
# Revision 1.15 2001/07/13 13:48:07 oes
# - Moved STATIC #define for pcre to (ac)config.h
# - Made -Ipcre depandant on static pcre compilation to
# avoid version conflicts
# - Included compilation and depandancies for new deanimate.c
# - Made changes to the pcre/pcreposix/pcrs build process
# as required by the new library autodetection in
# configure.in
#
# Revision 1.14 2001/07/01 16:27:44 oes
# Fixed misplaced dependancy
#
# Revision 1.13 2001/06/29 13:18:36 oes
# - added depandancy of filters.o on cgi.h
#
# Revision 1.12 2001/06/12 17:15:56 swa
# fixes, because a clean build on rh6.1 was impossible.
# GZIP confuses make, %configure confuses rpm, etc.
#
# Revision 1.11 2001/06/11 11:26:35 sarantis
# RPM version should be the same as ijbswa version. The rpm release is
# specified in the specfile.
#
# Revision 1.10 2001/06/07 17:27:45 swa
# added suse build section
#
# Revision 1.9 2001/06/04 18:31:58 swa
# files are now prefixed with either `confdir' or `logdir'.
# `make redhat-dist' replaces both entries confdir and logdir
# with redhat values
#
# Revision 1.8 2001/06/04 10:44:57 swa
# `make redhatr-dist' now works. Except for the paths
# in the config file.
#
# Revision 1.7 2001/06/03 17:09:09 swa
# swa for oes: reversed my earlier change
#
# Revision 1.6 2001/06/03 17:07:27 swa
# swa for oes
#
# Revision 1.5 2001/06/03 13:57:26 swa
# compile cgi.c (for andreas' GUI)
#
# Revision 1.4 2001/05/31 21:18:45 jongfoster
# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
#
# Revision 1.3 2001/05/29 20:02:48 joergs
# Changes for AmigaOS added.
#
# Revision 1.2 2001/05/17 22:23:23 oes
# - Added auto-generation of CRLFs for Win32 config files
# - Added comment-prefix to all Win32-only options in the config file
# and provided auto stripping of this prefix for the Win32 platform by make
#
# Revision 1.1.1.1 2001/05/15 13:59:00 oes
# Initial import of version 2.9.3 source tree
#
#
