tor-android/external/privoxy/doc/source/readme.sgml

<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [
<!entity % dummy "IGNORE"> 
<!entity supported SYSTEM "supported.sgml">
<!entity p-intro SYSTEM "privoxy.sgml">
<!entity contacting SYSTEM "contacting.sgml">
<!entity buildsource SYSTEM "buildsource.sgml">
<!entity p-version "3.0.12">
<!entity p-status "stable">
<!entity % p-not-stable "IGNORE">
<!entity % p-stable "INCLUDE">
<!entity % p-text "INCLUDE">       <!-- define we are a text only doc    -->
<!entity % p-doc "IGNORE">         <!-- and never a text doc             -->
<!entity % p-readme "INCLUDE">     <!-- all your README belong to us     -->
]>
<!--
 File        :  $Source: /cvsroot/ijbswa/current/doc/source/readme.sgml,v $

 Purpose     :  README for Privoxy
                
 $Id: readme.sgml,v 2.26 2009/03/21 11:32:38 hal9 Exp $

 Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
 See LICENSE.

 ========================================================================
 NOTE: Please read developer-manual/documentation.html before touching 
 anything in this, or other Privoxy documentation. You have been warned!
 Failure to abide by this rule will result in the revocation of your license 
 to live a peaceful existence!
 ========================================================================

 ===================================================================
 READ: Document Note: This file generates the README in the top level 
 source directory. It is generated as only a plain text file. The 
 current markup is not suitable for other formats. Build from 
 Makefile with 'make dok-readme'.
 ===================================================================

 READ:

 ======================================================================
 NOTE: The left margin spacing is *important* when using 'literallayout'
 WYSISWYG!!! Don't mess this up!!! Careful with linebreaks too, ie 
 the para tag forces a linebreak. Tags need to be carefully placed as a result
 to avoid extra blank lines, etc. 
 ======================================================================

 For stable releases, change 
 
  entity % p-not-stable "INCLUDE" 
 
 to 
 
  entity % p-not-stable "IGNORE" 
  
 in the DTD at the top. This will toggle various text 'off'. BOTH
 MUST be toggled in this case or you will get both text referencing 
 stable and unstable versions. You only want one or the other!

-->
<article id="index">
<artheader>
<![%dummy;[
 <para>
 <comment>
  This is here to keep vim syntax file from breaking :/
  If I knew enough to fix it, I would.
  PLEASE DO NOT REMOVE! HB: hal@foobox.net
 </comment>
 </para>
]]>
<abstract>
<para>
 <literal>
  <msgtext>
   <literallayout>
/*********************************************************************
 *
 * File        :  $Source: /cvsroot/ijbswa/current/doc/source/readme.sgml,v $
 *
 * Purpose     :  README file to give a short intro.
 *
 * Copyright   :  Written by and Copyright (C) 2001-2009  the SourceForge
 *                Privoxy team. http://www.privoxy.org/
 *
 *                Based on the Internet Junkbuster originally written
 *                by and Copyright (C) 1997 Anonymous Coders and 
 *                Junkbusters Corporation.  http://www.junkbusters.com
 *
 *                This program is free software; you can redistribute it 
 *                and/or modify it under the terms of the GNU General
 *                Public License as published by the Free Software
 *                Foundation; either version 2 of the License, or (at
 *                your option) any later version.
 *
 *                This program is distributed in the hope that it will
 *                be useful, but WITHOUT ANY WARRANTY; without even the
 *                implied warranty of MERCHANTABILITY or FITNESS FOR A
 *                PARTICULAR PURPOSE.  See the GNU General Public
 *                License for more details.
 *
 *                The GNU General Public License should be included with
 *                this file.  If not, you can view it at
 *                http://www.gnu.org/copyleft/gpl.html
 *                or write to the Free Software Foundation, Inc., 
 *                51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 
 *                USA
 *
 *********************************************************************/
</literallayout>
</msgtext>
</literal>
</para>

<para>
 <!-- include some conditional text -->
 This README is included with <![%p-not-stable;[ the development version of]]>
 Privoxy &p-version;. See http://www.privoxy.org/ for more information. The current code maturity
 level is <quote>&p-status;</quote><![%p-not-stable;[, but seems stable to us :)]]>.
</para>
</abstract>
</artheader>

<!-- Include privoxy.sgml boilerplate: -->
&p-intro;
<!-- end boilerplate -->

<!--   ~~~~~       New section      ~~~~~     -->
<sect1 id="importantchanges" ><title>IMPORTANT CHANGES</title>
<para>
 March 2009, Privoxy 3.0.12 is released.
</para>
<para>
 This is primarily a bug fix release. See the "ChangeLog", and the "What's
 New" section and the "Upgrader's Notes" in <citetitle>the User
 Manual</citetitle> for details. 
</para>

<para>
 February 2009, Privoxy 3.0.11 is released.
</para>
<para>
 As usual there are changes that effect the configuration. See the "ChangeLog",
 and the "What's New" section and the "Upgrader's Notes" in
 <citetitle>the User Manual</citetitle> for details and specifics. 
</para>
<para>
 This is a stable release, and marks a departure for Privoxy development.
</para>
<para>
 Previously, odd numbered releases were considered beta versions and
 were only released at the end of the development cycle when the code
 was already believed to be stable. Usually it was, so the stable release
 contained pretty much the same code, but got a higher version number.
 In the future we intend to release several snapshots between stable releases.
 There will probably still be about two stable releases per year,
 but hopefully about six snapshots instead of the two betas we have now.
 The intentions is to make testing without CVS access easier.
</para>
</sect1>

<!--   ~~~~~       New section      ~~~~~     -->
<sect1 id="install" ><title>INSTALL</title>
<para> 
 See the <filename>INSTALL</filename> file in this directory, for installing
 from raw source, and the <citetitle>User Manual</citetitle>, for all other
 installation types. 
</para>
</sect1>

<!--   ~~~~~       New section      ~~~~~     -->
<sect1 id="run"><title>RUN</title>
<para>
 privoxy [--help] [--version]
 [--no-daemon] [--pidfile PIDFILE] [--user USER[.GROUP]] [--chroot]  [--pre-chroot-nslookup
 HOSTNAME ][config_file]
</para>
<para>
 See the man page or <citetitle>User Manual</citetitle> for an explanation of each option, and 
 other configuration and usage issues.
</para>
<para>
 If no config_file is specified on the command line, Privoxy will look for a
 file named 'config' in the current directory (except Win32 which will look
 for 'config.txt'). If no config_file is found, Privoxy will fail to start.
</para>
<para>
 Or for Red Hat and Fedora based distributions: /etc/rc.d/init.d/privoxy start
</para>
<para>
 Or Debian and Ubuntu: /etc/init.d/privoxy start
</para>
</sect1>

<!--   ~~~~~       New section      ~~~~~     -->
<sect1 id="configuration"><title>CONFIGURATION</title>
<para>
 See: 'config', 'default.action', 'user.action', 'default.filter', and
 'user.filter'. 'user.action' and 'user.filter' are for personal and local
 configuration preferences. These are all well commented. Most of the magic is
 in '*.action' files. 'user.action' should be used for any actions
 customizations. On Unix-like systems, these files are typically installed in
 /etc/privoxy.  On Windows, then wherever the executable itself is installed.
 There are many significant changes and advances from earlier versions. The
 <citetitle>User Manual</citetitle> has an explanation of all configuration
 options, and examples: http://www.privoxy.org/user-manual/.
</para>
<para>
 Be sure to set your browser(s) for HTTP/HTTPS Proxy at &lt;IP&gt;:&lt;Port&gt;, or
 whatever you specify in the config file under 'listen-address'. DEFAULT is
 localhost:8118. Note that Privoxy ONLY proxies HTTP (and HTTPS) traffic. Do not try it 
 with FTP or other protocols for the simple reason it does not work.
</para>
<para>
 The actions list can be configured via the web interface accessed via
 http://p.p/, as well other options.
</para>
<![%p-not-stable;[
<para>
 All configuration files are subject to unannounced changes during the
 development process.
</para>
]]>
</sect1>

<!--   ~~~~~       New section      ~~~~~     -->
<sect1 id="documentation"><title>DOCUMENTATION</title>
<para>
 There should be documentation in the 'doc' subdirectory<![%p-not-stable;[, but it
 may not be completed at this point]]>. In particular, see the 
 <citetitle>User Manual</citetitle> there,
 the <citetitle>FAQ</citetitle>, and those interested in Privoxy development, should look at
 <citetitle>developer-manual</citetitle>. 
</para>
<para>
 <![%p-not-stable;[
 The most up to date source of information on the current development version,
 may still be either comments in the source code, or the included
 configuration files. ]]>The source and configuration files are all well
 commented. The main configuration files are: 'config', 'default.action', and
 'default.filter'<![%p-not-stable;[ in the top-level source directory]]>. 
</para>

<para>
 Included documentation may vary according to platform and packager. All 
 documentation is posted on http://www.privoxy.org, in case you don't have it, 
 or can't find it.
</para>
</sect1>

<!--   ~~~~~       New section      ~~~~~     -->
<sect1 id="contact"><title>CONTACTING THE DEVELOPERS, BUG REPORTING AND FEATURE REQUESTS</title>
<!-- Include contacting.sgml boilerplate: -->
  &contacting;
<!-- end boilerplate -->
</sect1>

<!-- <para> -->
<!--  <LiteralLayout> -->
<!--  ------------------------------------------------------------------------- -->
<!--  ijbswa-developers@lists.sourceforge.net -->
<!-- </LiteralLayout> -->
<!-- </para> -->
<!-- <para> -->
<!--  $Id: readme.sgml,v 2.26 2009/03/21 11:32:38 hal9 Exp $ -->
<!-- </para> -->

</article>